Divine

I'm looking to get a relatively cheap harness bar, just so I can attach harnesses to it. It doesn't have to be special or anything, as long as it works.

Do you guys recommend any brands?

Appreciate it!

Also before people start saying off-topic stuff like "why do you need it for street use, stick with regular seat belts" etc, that's not what I was asking, please stick to the topic.

Thanks guys!

nextcore

iTrader: (8)

cheap is relative... how much you looking to spend?
From what i seen sparco and some other bars go for around 400-500 brand new.
Also, I wouldnt "cheap" out on this part since secure harness belts to and it does hold you in place. Just my 2 cents.

terrasmak

iTrader: (8)

Just order a Kirk bolt in roll bar, or stick to stock belts

WillyP28

iTrader: (59)

I would go with sparco. I have no complaints and it was relatively easy to install.

ksuberk54

iTrader: (2)

If you want a roll bar I'd go with a Kirk. If you want a harness bar I personally like the look of the Enjuku harness bar.

Rubidium

iTrader: (6)

Good luck getting a hold of the Enjuku racing bar

guitman32

iTrader: (15)

If you want camlock and only care about an SFI rating you're looking at roughly $150-$180 for a 5-pt from G-Force, Racequip, Pyrotect and some others. A little more if you want an FIA sticker but they are all pretty much in the same arena price wise.

Keep in mind most all current literature Ive read recommends using 6-pt over 5-pt. But if you go harness bar that is the least of your worries.

terrasmak

iTrader: (8)

Don't forget the required work to properly install the lap and dub belts. Easily another $150 in labor.

Z_on_TE37's

iTrader: (3)

My rjs camlock harnesses were only like 135 a piece at summit racing, they are a small company, but make quality stuff.

cyc5181

iTrader: (12)

a harness bar is like $300-400 new, a kirk rollbar can be had for 5. Sure it's more labor intensive, but if you're a diy kinda guy, i would go with a kirk. That's what I got.

g-force 6pt is $150 pretty much everywhere........ or look for expired ones on eBay for $60-$70 shipped. I don't think HPDE or AutoX care if your harness is expired......

ksuberk54

iTrader: (2)

They're hard to find, sure but you can find them. I would just go with a Kirk roll bar though.

mike_eee

iTrader: (12)

Get BCR harness bar. Contact me for pics. Real stout customade

travlee

iTrader: (8)

http://www.350zhatchshocksandmore.com/Harness_Bar.htm

from jason zya on here.... he knows his stuff