Stock 1/4 mile times for 350Z?
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: houston
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Great site guys. I have a 2000 Camaro Z28 Automatic with 85,000 miles It was bone stock when I ran it at the track and it ran a 13.5@102 MPH
Since then I have added a MTI clear lid and after market MAF ends.
My friend at work has a sttock 350Z manual trans not sure of the year. What do these cars run in the 1/4 miles stock time and speed?
We are headed for the track soon so we can race. Im thinking I might get a 13.2-13.4@102-105 MPH
Thanks, Jason
Since then I have added a MTI clear lid and after market MAF ends.
My friend at work has a sttock 350Z manual trans not sure of the year. What do these cars run in the 1/4 miles stock time and speed?
We are headed for the track soon so we can race. Im thinking I might get a 13.2-13.4@102-105 MPH
Thanks, Jason
#6
Registered User
iTrader: (1)
Join Date: Dec 2004
Location: New York, NY
Posts: 2,632
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Bone stock Z's will typically run low 14's, but it is not uncommon to find many Z's running high 13's bone stock as well (both auto and manual). You shouldn't have a problem beating your friend at the track with your Z28.
#7
Registered User
Join Date: Apr 2005
Location: Baton Rouge. Louisiana
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Alberto,
What a LAME *** post! It's a FREAKING Discussion Board for Christs' sake! Maybe we should all just use the Search function from now on because I would venture to say that damn near EVERY topic has been discussed at one time or another.
Oh and btw, WHY are you so damn PROUD of those "bolt-on" times? You mention it in almost EVERY Post.... It's plainly writtin in your Sig that the times are "BOLT-ON"..... NO need to Brag Any Further ......
Oh, and don't misconstrue this to think that I don't like ya,because I do think you have ALOT to give to the Z community and you have helped me with some ofyour posts in the past, but it just gets old seeing the SEARCH thing over and over.......
Just pass on the reply if you have nothing to share with the guy......
Also Alberto, in your sig it says "stock headers". What is that? Mine has stock exhaust manifolds.
What a LAME *** post! It's a FREAKING Discussion Board for Christs' sake! Maybe we should all just use the Search function from now on because I would venture to say that damn near EVERY topic has been discussed at one time or another.
Oh and btw, WHY are you so damn PROUD of those "bolt-on" times? You mention it in almost EVERY Post.... It's plainly writtin in your Sig that the times are "BOLT-ON"..... NO need to Brag Any Further ......
Oh, and don't misconstrue this to think that I don't like ya,because I do think you have ALOT to give to the Z community and you have helped me with some ofyour posts in the past, but it just gets old seeing the SEARCH thing over and over.......
Just pass on the reply if you have nothing to share with the guy......
Also Alberto, in your sig it says "stock headers". What is that? Mine has stock exhaust manifolds.
Last edited by BLN350Z; 12-27-2005 at 10:40 AM.
Trending Topics
#9
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by BLN350Z
Alberto,
What a LAME *** post! It's a FREAKING Discussion Board for Christs' sake! Maybe we should all just use the Search function from now on because I would venture to say that damn near EVERY topic has been discussed at one time or another.
Oh and btw, WHY are you so damn PROUD of those "bolt-on" times? You mention it in almost EVERY Post.... It's plainly writtin in your Sig that the times are "BOLT-ON"..... NO need to Brag Any Further ......
Oh, and don't misconstrue this to think that I don't like ya,because I do think you have ALOT to give to the Z community and you have helped me with some ofyour posts in the past, but it just gets old seeing the SEARCH thing over and over.......
Just pass on the reply if you have nothing to share with the guy......
Also Alberto, in your sig it says "stock headers". What is that? Mine has stock exhaust manifolds.
What a LAME *** post! It's a FREAKING Discussion Board for Christs' sake! Maybe we should all just use the Search function from now on because I would venture to say that damn near EVERY topic has been discussed at one time or another.
Oh and btw, WHY are you so damn PROUD of those "bolt-on" times? You mention it in almost EVERY Post.... It's plainly writtin in your Sig that the times are "BOLT-ON"..... NO need to Brag Any Further ......
Oh, and don't misconstrue this to think that I don't like ya,because I do think you have ALOT to give to the Z community and you have helped me with some ofyour posts in the past, but it just gets old seeing the SEARCH thing over and over.......
Just pass on the reply if you have nothing to share with the guy......
Also Alberto, in your sig it says "stock headers". What is that? Mine has stock exhaust manifolds.
![](https://my350z.com/forum/images/smilies/icon18.gif)
![](https://my350z.com/forum/images/smilies/icon22.gif)
I told him about my times because not all member have the signature function on, I dont know if you know that or not, so if its off, I wanted to tell him about it, and to give him an idea about what a properly driven mildly mod'd Z can do-if his buddy ever adds mods. I wrote stock headers and cams because I got sooooo many PM's from guys asking me if I secretly had these mods, and I do not
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
Oh and Im proud of my times and traps because its not something that gets done every day with a Z with my mods. And I take pride in running much faster times and higher traps than 99% of Z owners with the same mods and in MANY cases more mods. It shows what driving can do. I like feeling like when I go to the track I show at least 1 person what a Z is capable of....you would too if you ran these times
![](https://my350z.com/forum/images/smilies/icon39.gif)
Last edited by Alberto; 12-27-2005 at 10:54 AM.
#10
Registered User
iTrader: (3)
Join Date: Apr 2004
Location: Annapolis Maryland
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
yea i have the same mods as bert and i ran consistant 12.9's. so its possible to get a light modded Z into 12's, it all depends on launch, shifting which is albertos forte is more useful on races from a roll. Stock ide say with a good driver at sea level 13.8 is doable.
#13
New Member
iTrader: (8)
Join Date: Oct 2005
Location: Chicago, IL
Posts: 8,365
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by BLN350Z
Alberto,
What a LAME *** post! It's a FREAKING Discussion Board for Christs' sake! Maybe we should all just use the Search function from now on because I would venture to say that damn near EVERY topic has been discussed at one time or another.
Oh and btw, WHY are you so damn PROUD of those "bolt-on" times? You mention it in almost EVERY Post.... It's plainly writtin in your Sig that the times are "BOLT-ON"..... NO need to Brag Any Further ......
Oh, and don't misconstrue this to think that I don't like ya,because I do think you have ALOT to give to the Z community and you have helped me with some ofyour posts in the past, but it just gets old seeing the SEARCH thing over and over.......
Just pass on the reply if you have nothing to share with the guy......
Also Alberto, in your sig it says "stock headers". What is that? Mine has stock exhaust manifolds.
What a LAME *** post! It's a FREAKING Discussion Board for Christs' sake! Maybe we should all just use the Search function from now on because I would venture to say that damn near EVERY topic has been discussed at one time or another.
Oh and btw, WHY are you so damn PROUD of those "bolt-on" times? You mention it in almost EVERY Post.... It's plainly writtin in your Sig that the times are "BOLT-ON"..... NO need to Brag Any Further ......
Oh, and don't misconstrue this to think that I don't like ya,because I do think you have ALOT to give to the Z community and you have helped me with some ofyour posts in the past, but it just gets old seeing the SEARCH thing over and over.......
Just pass on the reply if you have nothing to share with the guy......
Also Alberto, in your sig it says "stock headers". What is that? Mine has stock exhaust manifolds.
#14
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by djnc350Z
+0.99...i'm pretty sick of the "use the search function" replies too...either answer the guy's question, or go on to the next thread...i'm on this site all day at work and I have no problem wasting a few seconds reading a question that's already been posted
#17
New Member
iTrader: (8)
Join Date: Oct 2005
Location: Chicago, IL
Posts: 8,365
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Alberto
You have 3XX some posts, wait till you have 3000+ and get back to me...
#19
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by djnc350Z
i knew you'd say that, but just realize "use the search function" can be just as annoying as a repeated question
#20
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by rbfd
13.7@104 stock, highest stock trap speed ive seen to date. Then again im no rookie down the 1320 either. Ive beaten many camaro's like yours, but its all about the driver when its that close in times. Consistency is key.