350z: japan oem vs USA oem
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: New jersey
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
350z: japan oem vs USA oem
many cars in many cases in the original country the car was made is usually different then what we in the USA get, for better or for worse. So i started to wonder, what is the difference, if any , from the japanese oem 350z to the usa 350z, beside the obvious right hand drive.
list if any
list if any
#6
Know it all
iTrader: (6)
Join Date: Nov 2008
Location: Dallas (Colleyville), Texas
Posts: 695
Likes: 0
Received 1 Like
on
1 Post
They have a little reflector under the fender Z emblems, and in the front bumper there are jets that pop out to clean the headlights. And the rear bumper license plate hole is thinner and wider to fit a japanese license plate. And there is a Fairlady badge on all of them, lol.
Trending Topics
#8
Registered User
iTrader: (3)
Join Date: Apr 2009
Location: Denver
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Good write up on JDM in wikipedia:
http://en.wikipedia.org/wiki/Japanese_Domestic_Market
They forgot the Mothra repellent mixed into the paint though.
http://en.wikipedia.org/wiki/Japanese_Domestic_Market
They forgot the Mothra repellent mixed into the paint though.
Last edited by NismoZ_840; 07-13-2009 at 07:35 PM.
#9
Registered User
iTrader: (3)
Join Date: Dec 2008
Location: Rapid City, SD Ellsworth AFB
Posts: 1,447
Likes: 0
Received 0 Likes
on
0 Posts
There's one here on base I get some shots of. But can tell you that the 03-05 had a few more models built. The S tune Nismo's were production models and also had wheel options offered in 03 well before the us got them in 06.
#10
Registered User
iTrader: (3)
Join Date: Apr 2009
Location: Denver
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
They have a little reflector under the fender Z emblems, and in the front bumper there are jets that pop out to clean the headlights. And the rear bumper license plate hole is thinner and wider to fit a japanese license plate. And there is a Fairlady badge on all of them, lol.
http://www.greasemonkeyintl.com/images/gmi06_01h.jpg
#14
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
The rear bumper should be the same, the japanese plate is very close in dimentions to ours. Now the euro model bumper is different, a bit thinnner and wider in the plate section.
#17
Registered User
Join Date: Jun 2008
Location: South Africa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
hmm.. well i'm from south africa
we have right hand drive models here, things i've noticed are different are we also have front light washers in the bumper, my front numberplate also has a huge plastic backing plate that seems oem. obviosuly our speedo shows up to 280km/h. on the back one side is reverse light, other side is fog light. ours don't say fairlady tho, we have the wide number plate bumper too. we have side indicators underneath the z emblem
we have right hand drive models here, things i've noticed are different are we also have front light washers in the bumper, my front numberplate also has a huge plastic backing plate that seems oem. obviosuly our speedo shows up to 280km/h. on the back one side is reverse light, other side is fog light. ours don't say fairlady tho, we have the wide number plate bumper too. we have side indicators underneath the z emblem
#18
Registered User
Join Date: Nov 2007
Location: Southlake, Texas
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Wondering WHY something like the light under the fender emblem was removed for US. I mean - from a price standpoint - what would it cost them....a buck or two? It could be a safety plus too....although our turn signals seems to be brighter with a wider dispersion than most. Just seems strange to me....that's all...