Notices
2003-2009 Nissan 350Z

What have you done for your Z today?

Thread Tools
 
Search this Thread
 
Old Feb 2, 2015 | 02:21 PM
  #8681  
Chrismx5's Avatar
Chrismx5
Registered User
 
Joined: Aug 2014
Posts: 197
Likes: 0
From: Where's the bar at?
Default

Originally Posted by Nismo350z#0310
Each to their own hey.

Have fun picking up four SSR Viennas over in the states.
Reply
Old Feb 2, 2015 | 03:23 PM
  #8682  
MicVelo's Avatar
MicVelo
350Z/370Z Tech Moderator
MY350Z.COM
Premier Member
10 Year Member
Liked
 
Joined: Oct 2014
Posts: 10,315
Likes: 3,378
From: Northern California
Default

Originally Posted by n0smoke
You could always just put the 350Z back on? I did mine recently and figured, well if this goes awry I'll just slap it back on and no one will know. Hehe. Or is it scratched in such a way that the original letters don't cover the damage?
Yeah, I think I went back out to polish it the day I was inspired by reading your post about removing the logo. Heh heh.

I probably could put the original lettering back on and have it hide the small scuff but what the heck, I had a gift card to use up on EBay (or was it Amazon?). Worst case, when I am tired of self loathing over wearing my hypocritical emblemage, I'll just yank it off and re-polish it. Laff!

I'm doing stuff to one of my other cars right now so won't be doing anything to my Z until my new suspension goodies are delivered.
Reply
Old Feb 2, 2015 | 07:01 PM
  #8683  
abarclay's Avatar
abarclay
New Member
iTrader: (41)
 
Joined: Jul 2007
Posts: 2,610
Likes: 157
From: Atlanta, GA
Default

Finally got a proper wash, of course I waited until it was about 35 deg outside (yeah I know, that's bikini weather for you fellas up north )

Also ordered a new hood from a Racing Crowd that's Matchless


Last edited by abarclay; Feb 2, 2015 at 07:22 PM.
Reply
Old Feb 4, 2015 | 03:23 AM
  #8684  
bb17's Avatar
bb17
Registered User
 
Joined: May 2012
Posts: 280
Likes: 8
From: USA
Default

New Michelin Pilot Super Sport tires on stock Nismo Rays. 265/40/18 front and 295/35/19 rear.

What have you done for your Z today?-ufiw6zj.jpg


What have you done for your Z today?-axiyowe.jpg
Reply
Old Feb 4, 2015 | 07:35 AM
  #8685  
n0smoke's Avatar
n0smoke
New Member
iTrader: (1)
 
Joined: Dec 2014
Posts: 240
Likes: 26
From: St. Augustine, FL
Default

Originally Posted by bb17
New Michelin Pilot Super Sport tires on stock Nismo Rays. 265/40/18 front and 295/35/19 rear.

[img]https://i.imgur.com/UFIW6zj.jpg[//img]


[img]https://i.imgur.com/AXIyowe.jpg[//img]
I love these tires. One of the better 'mods' someone can do when picking up one of these cars.

I'd be scared to drive this car with it's factory 225/245 on some mickey mouse tires.
Reply
Old Feb 4, 2015 | 01:45 PM
  #8686  
jg021v's Avatar
jg021v
New Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2011
Posts: 180
Likes: 36
From: Houston, TX
Default




#camberkit #z #fairladyz #nissan #350z #vq35hr
Reply
Old Feb 4, 2015 | 03:10 PM
  #8687  
MicVelo's Avatar
MicVelo
350Z/370Z Tech Moderator
MY350Z.COM
Premier Member
10 Year Member
Liked
 
Joined: Oct 2014
Posts: 10,315
Likes: 3,378
From: Northern California
Default

Originally Posted by n0smoke
I love these tires. One of the better 'mods' someone can do when picking up one of these cars.

I'd be scared to drive this car with it's factory 225/245 on some mickey mouse tires.
Mickey Mouse tahrs!!!

You mean like these?



Swear this is the brand.... LingLongs!!!! Awesome!! Guess where they're made! (It's OK.... I can make fun of them for they are my brothers!)


Check out the awesome flame on the sidewall!! That adds an extra 50 mph top end!!! Pulls 1.2gs!!!



OK, truth is, I needed to throw some tires on quick to move the car out of my shop, so I ran up the block to the tire shop down the block and popped these on my Z33 Touring alloys so I could take the Z32 off the rack.

$249 for the set. Mounted and balanced.

And you know what? For what they were intended (daily driver, point A to B), they weren't bad. Nothing like my Mushylins or the present HTR-Z3s but hey, they fit the bill and when I sold that car, the new owner was pleased it had 18s on it! HAR!!!

Mic (and no, that does NOT stand for Mickey.....)
Reply
Old Feb 4, 2015 | 03:18 PM
  #8688  
MicVelo's Avatar
MicVelo
350Z/370Z Tech Moderator
MY350Z.COM
Premier Member
10 Year Member
Liked
 
Joined: Oct 2014
Posts: 10,315
Likes: 3,378
From: Northern California
Default

Originally Posted by jg021v



#camberkit #z #fairladyz #nissan #350z #vq35hr
Interesting timing on your post... I was just chastising myself because a grown man isn't supposed to get so excited receiving toys in the mail but I just opened the box and got all giddy.



Wife has a neckstrain problem owing to how often she shakes her head at me over my affliction. "It's just my Type-N blood, dear.... I need my fix, you know."
Reply
Old Feb 4, 2015 | 03:23 PM
  #8689  
Z1NONLY's Avatar
Z1NONLY
Registered User
iTrader: (2)
 
Joined: Aug 2006
Posts: 6,503
Likes: 95
From: SW Fl
Default

Originally Posted by Chrismx5
I feel a tiny bit bad..

I took her out to the race track.

Rather large list of things "to do"

Brake ducting,
New tires,
New seat,
Wheel Alignment,
Harness bar/Harness
Stiffer Suspension
Originally Posted by Chrismx5
New wheels are on!



Wait, what?
Reply
Old Feb 4, 2015 | 05:09 PM
  #8690  
jg021v's Avatar
jg021v
New Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2011
Posts: 180
Likes: 36
From: Houston, TX
Default

the 17mm nut was easy to unbolt, including the cotter pins. The real work would be the 14mm bolts in b/w the front struts. They fought me the entire time of the extraction process from in front of or behind the spring. Compressing the spring with an additional jack helps. This is only if you install without removing the front struts.
Reply
Old Feb 4, 2015 | 05:54 PM
  #8691  
mr. sparco's Avatar
mr. sparco
New Member
iTrader: (13)
 
Joined: Dec 2005
Posts: 7,090
Likes: 460
From: Sunny Beaches
Default

Name:  ViennaZ.jpg
Views: 179
Size:  5.93 MB

Originally Posted by Chrismx5
Each to their own hey.

Have fun picking up four SSR Viennas over in the states.
Viennas are actually quite common here, they pop up often on zilvia and lexus forums. RuinedZ had a clean set with proper specs on his car many years back before he decided to go Garage Mak.
Reply
Old Feb 4, 2015 | 06:10 PM
  #8692  
clubhopper's Avatar
clubhopper
New Member
iTrader: (6)
 
Joined: Nov 2008
Posts: 768
Likes: 30
From: The 9-'oh'-5, Ontario
Default

^proper...so much better
Reply
Old Feb 4, 2015 | 08:13 PM
  #8693  
n0smoke's Avatar
n0smoke
New Member
iTrader: (1)
 
Joined: Dec 2014
Posts: 240
Likes: 26
From: St. Augustine, FL
Default

Originally Posted by MicVelo
Mickey Mouse tahrs!!!

You mean like these?


[IMG]https://cimg6.ibsrv.net/gimg/my350z.com-vbulletin/1024x768/80-z32tahrs_00001_40ee820b11701c6bb71fa52a8c074969bccd2f58.jpg[///IMG]
Swear this is the brand.... LingLongs!!!! Awesome!! Guess where they're made! (It's OK.... I can make fun of them for they are my brothers!)

[IMG]https://cimg7.ibsrv.net/gimg/my350z.com-vbulletin/1024x768/80-z32tahrs_00003_a726cd62d198437e986b7f398d7de63901ecab3d.jpg[///IMG]
Check out the awesome flame on the sidewall!! That adds an extra 50 mph top end!!! Pulls 1.2gs!!!

[IMG]https://cimg8.ibsrv.net/gimg/my350z.com-vbulletin/1024x768/80-z32tahrs_00004_4447277f2b142e8aff19507f6b82c545fe245b44.jpg[///IMG]

OK, truth is, I needed to throw some tires on quick to move the car out of my shop, so I ran up the block to the tire shop down the block and popped these on my Z33 Touring alloys so I could take the Z32 off the rack.

$249 for the set. Mounted and balanced.

And you know what? For what they were intended (daily driver, point A to B), they weren't bad. Nothing like my Mushylins or the present HTR-Z3s but hey, they fit the bill and when I sold that car, the new owner was pleased it had 18s on it! HAR!!!

Mic (and no, that does NOT stand for Mickey.....)
Hey, there is a time and place for everything. A Z on cheap tires is better than a Z on no tires.

My dad is the type of guy who will mismatch three or four different tires from a used tire shop to save a couple bucks. But after a decade or so of tinkering with cars (I know, not very long- but long enough to realize) that you truly do get what you pay for. Most of the time shelling out the extra cash (especially for tires, brakes, -safety items) is worth it in the long run.

I'm just fortunate enough that mine came with the Pilot's on it. I would not have wanted to foot the bill on that one.

Ah, to stay on topic. I finally got my first detail of the interior done yesterday. The car came pretty clean, but I'm OCD so I had to break out the detailing brushes.

Reply
Old Feb 4, 2015 | 08:20 PM
  #8694  
drvqz33's Avatar
drvqz33
Registered User
iTrader: (10)
 
Joined: Aug 2012
Posts: 837
Likes: 3
From: Vero Beach, FL
Default

^ looks like new!
Reply
Old Feb 5, 2015 | 04:00 AM
  #8695  
angelo350z's Avatar
angelo350z
New Member
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,388
Likes: 6
From: Germany
Default

^^ Wow, even your pedals look brand new. Did you take your steering wheel apart?
Reply
Old Feb 5, 2015 | 01:13 PM
  #8696  
n0smoke's Avatar
n0smoke
New Member
iTrader: (1)
 
Joined: Dec 2014
Posts: 240
Likes: 26
From: St. Augustine, FL
Default

Originally Posted by angelo350z
^^ Wow, even your pedals look brand new. Did you take your steering wheel apart?
Lol. Well to be fair, the pedals are brand new. And no, I didn't take the steering wheel apart. The first time I noticed the RH trim piece sticking out is when I looked at that picture. Not sure why it's like that. But it sure does bother me now
Reply
Old Feb 5, 2015 | 03:21 PM
  #8697  
jg021v's Avatar
jg021v
New Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2011
Posts: 180
Likes: 36
From: Houston, TX
Default TBW Bell Housing Aluminum Splash Shield

Reply
Old Feb 6, 2015 | 03:05 AM
  #8698  
aboveliquidice's Avatar
aboveliquidice
New Member
iTrader: (1)
 
Joined: Feb 2006
Posts: 136
Likes: 0
From: Orlando
Default

Originally Posted by jg021v
This buttons up behind the Zspeed under shroud?
Reply
Old Feb 6, 2015 | 05:29 AM
  #8699  
jg021v's Avatar
jg021v
New Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2011
Posts: 180
Likes: 36
From: Houston, TX
Default

It does button up behind the zSpeed shroud. There are only five screws. TBW also gives you a spacer to use in the center punch, too. Exact replacement for OEM plastic splash shield.
Reply
Old Feb 6, 2015 | 03:44 PM
  #8700  
nismoAz's Avatar
nismoAz
Registered User
 
Joined: Nov 2014
Posts: 8
Likes: 0
From: Kingman AZ
Default

I spent 3 hours washing her and absolutely had to take her out on the town for a good hour to show the beauty off!
Reply



All times are GMT -8. The time now is 08:46 PM.