What have you done for your Z today?
The following 2 users liked this post by Nismo350z#0310:
khnitz (01-24-2021),
zwei_the_c (01-31-2021)
New Member
iTrader: (3)
New Member
You need to run the VIN# through. It's on there, look for it.
The following users liked this post:
Juan LD2 (02-03-2021)
New Member
The following 2 users liked this post by zwei_the_c:
Nismo350z#0310 (03-23-2021),
SonnyWu (02-02-2021)
Removing window switch finisher
Attachment 424706
Replaced the window switch finisher because it was annoying me how scratched up it had gotten by the previous owner. OCD at its finest. If anyone wants this non-cracked one, let me know. I hate to throw it away.
Replaced the window switch finisher because it was annoying me how scratched up it had gotten by the previous owner. OCD at its finest. If anyone wants this non-cracked one, let me know. I hate to throw it away.
Thanks, fellow OCD'er
Plastic pry tools
New Member
iTrader: (3)
My tires have been reporting low air for months now. Since it was still 60 degrees after work and 95% of the snow is gone I took the Z out for its first drive of 2021. Inflated the tires and gas’d up. Then, I took my daughter w me to get a pizza. Boy I’d forgotten how loud my car is on the inside.
i also popped the hood and started replacing some of my oem bolts w some titanium bolts I ordered. Freakin loving it. Will see if I can carve out an hour this weekend to play w the car a little more.
i also popped the hood and started replacing some of my oem bolts w some titanium bolts I ordered. Freakin loving it. Will see if I can carve out an hour this weekend to play w the car a little more.
The following users liked this post:
DarkZ03 (03-12-2021)
Not driving your car to not put miles in it is like not having sex to keep your girlfriend ready for the next guy just drive and maintain her correctly and shell live forever !
Last edited by terrasmak; 05-11-2021 at 08:38 AM.
The following users liked this post:
WYZIWYG (08-23-2021)
New Member
iTrader: (11)
Eh, I get it... but my car was 14.5k, just with one vendor I'm in the hole for about 17k, not including the 5k+ for seats, 5k for wheels and 4k for brakes and the but load of money spent on body mods and a paint job. I'm happy driving the car once in a while if it's going to keep it looking pristine as it does, my car is in showroom quality, and I want to keep it like that. Eventually I'll get a car for thrashing around/racing but not this one.
New Member
So recently, just installed HKS IV SP coilover, got a set of Willans 6-PT harness, K-Harness bar came in yesterday, installing today.
Going to need guides on how to "properly" install the Willans harness though.
Lastly, today, I got new tires mounted on my Z.
I'm now running F: 275/35/R18 & R: 305/35/R18 on a stock body Z. Need to get alignment to dial in a modest amount of camber and zero out toe.
Going to need guides on how to "properly" install the Willans harness though.
Lastly, today, I got new tires mounted on my Z.
I'm now running F: 275/35/R18 & R: 305/35/R18 on a stock body Z. Need to get alignment to dial in a modest amount of camber and zero out toe.
New Member
iTrader: (11)
Most people here including me will say, no cage, no harness.
welcome to the 275/305 club lol
welcome to the 275/305 club lol
Last edited by DarkZ03; 03-13-2021 at 07:38 PM.
New Member
Wheel Specs
So recently, just installed HKS IV SP coilover, got a set of Willans 6-PT harness, K-Harness bar came in yesterday, installing today.
Going to need guides on how to "properly" install the Willans harness though.
Lastly, today, I got new tires mounted on my Z.
I'm now running F: 275/35/R18 & R: 305/35/R18 on a stock body Z. Need to get alignment to dial in a modest amount of camber and zero out toe.
Going to need guides on how to "properly" install the Willans harness though.
Lastly, today, I got new tires mounted on my Z.
I'm now running F: 275/35/R18 & R: 305/35/R18 on a stock body Z. Need to get alignment to dial in a modest amount of camber and zero out toe.
Thanks...