Walbro 350 Install
#1
New Member
Thread Starter
Walbro 350 Install
Hey Guys,
Wondering if anyone has done the install with a Walbro 350? I currently have the 255 but am putting together a newly built vortech DE and need more fuel.
Do you need to do any drilling in the orifice like the 255 or is it plug and play?
Cheers,
Channing
Wondering if anyone has done the install with a Walbro 350? I currently have the 255 but am putting together a newly built vortech DE and need more fuel.
Do you need to do any drilling in the orifice like the 255 or is it plug and play?
Cheers,
Channing
#2
350Z-holic
iTrader: (13)
The AEM 340lph and most the Walbro 340lph are direct replacements -
Do you have a return fuel system on the car? Or plan on getting one?
Did you already drill the orifice when you installed the 255lph?
Do you have a return fuel system on the car? Or plan on getting one?
Did you already drill the orifice when you installed the 255lph?
The following users liked this post:
channing2294 (01-11-2024)
#3
New Member
Thread Starter
255 is currently installed with the drilled orifice. And yep, fuel return system and bigger rails.
Thanks for the reply buddy, I'll be popping the 350 Walbro in this weekend.
Im assuming the install is the exact same as the 255? The case looks identical. (Ex. Trimming the bottom plastic)
Cheers
Thanks for the reply buddy, I'll be popping the 350 Walbro in this weekend.
Im assuming the install is the exact same as the 255? The case looks identical. (Ex. Trimming the bottom plastic)
Cheers
Last edited by channing2294; 01-11-2024 at 09:28 AM.
#4
350Z-holic
iTrader: (13)
Yea - they are very similar - get in there and have a look -
If you have questions after you get in to it just let us know and we’ll help you out -
If you have questions after you get in to it just let us know and we’ll help you out -
The following users liked this post:
channing2294 (01-11-2024)
#5
New Member
Thread Starter
Just finished the install. Exact same as the 255. Shaved the tabs off the bottom and it popped right in. Drilled the jet to .093". Hopefully that'll do the trick for the pressure. We shall see come initial start up in a few months time.
The following users liked this post:
bealljk (01-15-2024)
Thread
Thread Starter
Forum
Replies
Last Post