Notices
2009+ 370Z General discussion and news for the Z34 (2009+) Nissan 370z with the new 3.7-liter V6

What the 370 is capable of with a few bolt ons..

Thread Tools
 
Search this Thread
 
Old 03-13-2010, 11:04 AM
  #1  
Red370
Registered User
Thread Starter
 
Red370's Avatar
 
Join Date: Feb 2010
Location: TX
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default What the 370 is capable of with a few bolt ons..

Car has Stillen G3 Intakes, Stillen exhaust, Berk HFC's and Cobb tune, take it how you want, but Modified tested these and they were within +/- 3hp/tq


Last edited by Red370; 03-13-2010 at 11:06 AM.
Old 03-13-2010, 11:12 AM
  #2  
BrokenVow
Registered User
 
BrokenVow's Avatar
 
Join Date: Feb 2009
Location: Tacoma, Wa
Posts: 250
Likes: 0
Received 0 Likes on 0 Posts
Default

It's capable of everything it's capable of doing without those bolt ons. I mean, you could go to the movies, go to the grocery store and get a few bags of food, take a friend out for drinks, etc. I wouldnt drive it off road or anything, but as long as you stick to pavement you should do fine!

Since you need to ask it...my guess would be 14.2-14.5.
Old 03-13-2010, 11:36 AM
  #3  
AAB350z
Registered User
 
AAB350z's Avatar
 
Join Date: Jun 2006
Location: Florida
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default

IBTL
Old 03-13-2010, 11:41 AM
  #4  
cdoxp800
Registered User
iTrader: (12)
 
cdoxp800's Avatar
 
Join Date: Oct 2006
Location: Florida
Posts: 2,771
Likes: 0
Received 2 Likes on 1 Post
Default

Old 03-13-2010, 12:11 PM
  #5  
rich2342
New Member
iTrader: (3)
 
rich2342's Avatar
 
Join Date: Dec 2008
Location: Mass
Posts: 1,539
Received 7 Likes on 7 Posts
Default

wut?
Old 03-13-2010, 12:11 PM
  #6  
Nexx
New Member
iTrader: (41)
 
Nexx's Avatar
 
Join Date: Jun 2005
Location: DFW
Posts: 13,654
Received 8 Likes on 7 Posts
Default

ROFL
Old 03-13-2010, 12:29 PM
  #7  
quiksilver38
Registered User
 
quiksilver38's Avatar
 
Join Date: Aug 2007
Location: Portland, OR
Posts: 2,332
Likes: 0
Received 1 Like on 1 Post
Default

Old 03-13-2010, 12:41 PM
  #8  
Kwame
New Member
iTrader: (78)
 
Kwame's Avatar
 
Join Date: Jun 2004
Location: New York
Posts: 5,219
Received 18 Likes on 15 Posts
Default

I don't drink but I'm wondering if someone slipped something into my water at the gym after trying to focus on whatever is on that Accessport.
Old 03-13-2010, 12:44 PM
  #9  
bottlefedZ
Registered User
iTrader: (1)
 
bottlefedZ's Avatar
 
Join Date: Jun 2009
Location: Mcallen,Tx
Posts: 449
Received 0 Likes on 0 Posts
Default

WTF
Old 03-13-2010, 12:44 PM
  #10  
Reality350
Registered User
iTrader: (25)
 
Reality350's Avatar
 
Join Date: Apr 2006
Location: Toronto, Canada
Posts: 7,059
Likes: 0
Received 1 Like on 1 Post
Default

^^I just had a drink.. and I still can't make it out...

*goes back for another*
Old 03-13-2010, 12:46 PM
  #11  
Hydralisk
Registered User
 
Hydralisk's Avatar
 
Join Date: Sep 2009
Location: OK
Posts: 549
Likes: 0
Received 0 Likes on 0 Posts
Default

i think you are supposed to drink a bunch to see that.
Old 03-13-2010, 02:01 PM
  #12  
davidv
Registered User
iTrader: (2)
 
davidv's Avatar
 
Join Date: Jun 2004
Location: Tucson, AZ
Posts: 42,754
Likes: 0
Received 11 Likes on 11 Posts
Default

Oh man I forget to buy eye glasses last week.
Old 03-13-2010, 02:47 PM
  #13  
NISMO_558
Registered User
iTrader: (1)
 
NISMO_558's Avatar
 
Join Date: Dec 2006
Location: Minnesota
Posts: 4,003
Likes: 0
Received 4 Likes on 4 Posts
Default

It looks like 355 hp @ 6425 RPM and 271 trq @ 6557 RPM I'd take those numbers with a grain of salt since it's off of an accessport
Old 03-13-2010, 03:54 PM
  #14  
SatchScream
Registered User
iTrader: (1)
 
SatchScream's Avatar
 
Join Date: Jul 2009
Location: Euless, Tx
Posts: 1,178
Likes: 0
Received 0 Likes on 0 Posts
Default

I can't read it.
Old 03-13-2010, 04:15 PM
  #15  
Red370
Registered User
Thread Starter
 
Red370's Avatar
 
Join Date: Feb 2010
Location: TX
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry for the blurry pic, my phone blows goats when it comes to taking pics. It says 333whp and 271 ft./lbs, and to the guy that said "id take those numbers with a grain of salt, its on an accessport", also understand that Modified and Import Tuner did articles trying to see how accurate tuning device dynos are and found them to be accurate to within 3whp either way. The system uses the ECU to determine output throughout the RPM band and it makes its own calculations, not sure how it does, but apparently its pretty damn accurate. The numbers would be the equivalent of a dynojet. Also keep in mind that I have I/HFC/CBE, and an aggressive tune from Altered Atmosphere.

Last edited by Red370; 05-01-2010 at 02:10 PM.
Old 03-13-2010, 04:57 PM
  #16  
ninous26
Registered User
iTrader: (2)
 
ninous26's Avatar
 
Join Date: Mar 2008
Location: Scottsdale AZ
Posts: 595
Likes: 0
Received 0 Likes on 0 Posts
Default

modified can suck dick
Old 03-13-2010, 05:37 PM
  #17  
PeterSellers
New Member
iTrader: (1)
 
PeterSellers's Avatar
 
Join Date: Dec 2007
Location: San Diego
Posts: 199
Likes: 0
Received 1 Like on 1 Post
Default

The accessport "dyno" is not accurate whatsoever. It said I had about 30 whp more than I actually did, back when I had it on my old ms3.
Old 03-13-2010, 08:19 PM
  #18  
scotts300
350Z-holic
iTrader: (46)
 
scotts300's Avatar
 
Join Date: Aug 2003
Location: Away
Posts: 8,193
Received 7 Likes on 6 Posts
Default

Originally Posted by Red370
Sorry for the blurry pic, my Iphone blows goats when it comes to taking pics. It says 333whp and 271 ft./lbs, and to the guy that said "id take those numbers with a grain of salt, its on an accessport", also understand that Modified and Import Tuner did articles trying to see how accurate tuning device dynos are and found them to be accurate to within 3whp either way. The system uses the ECU to determine output throughout the RPM band and it makes its own calculations, not sure how it does, but apparently its pretty damn accurate. The numbers would be the equivalent of a dynojet. Also keep in mind that I have I/HFC/CBE, and an aggressive tune from Altered Atmosphere.
If AA did a tune on your car, didn't they dyno it?

A run at the drag strip would also settle a lot of this discussion.

The local 370s that I've seen with the Stillen G3 intake and exhaust make about 300rwhp after baselining about 275rwhp.



The red line is after the G3 Stillen intake only. The final green line is with the intake and exhaust. Each change gains around ten wheel horsepower and a moderate torque increase. Can one gain another 35rwhp from an "aggressive" tune? I don't know, but it seems like a stretch, but I'm anxious what the dyno from AA showed as a comparison.
Old 03-13-2010, 11:14 PM
  #19  
Red370
Registered User
Thread Starter
 
Red370's Avatar
 
Join Date: Feb 2010
Location: TX
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by PeterSellers
The accessport "dyno" is not accurate whatsoever. It said I had about 30 whp more than I actually did, back when I had it on my old ms3.
I guarantee that you didnt input the proper weight of the car and you, and if you did, you calculated too much weight. To the guy that said that Modified could "suck dick", Modified is one of the more respectable tuner magazines that actually does dyno proven tests and has articles on alot of great products, and has great coverage on import auto x events. Gentlemen, take it how you want, because quite frankly I dont care. And I agree, I dont talk about it, I am about it, as can been seen by the videos of me racing and eating an HR and a DE. I'm a Z enthusiast and I appreciate all Z cars, I traded in my HR for the Z34 and the car is just better in every respect, some of you other Z enthusiasts, not the fanboys, should test drive one.
Old 03-14-2010, 10:02 AM
  #20  
bottlefedZ
Registered User
iTrader: (1)
 
bottlefedZ's Avatar
 
Join Date: Jun 2009
Location: Mcallen,Tx
Posts: 449
Received 0 Likes on 0 Posts
Default

What part of Texas you from?


Quick Reply: What the 370 is capable of with a few bolt ons..



All times are GMT -8. The time now is 11:59 PM.