Check your Roadster top for pinholes
#81
Registered User
Join Date: Sep 2003
Location: Sacramento, CA
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
So I got it back. They did not replace the top with the double stitched top. It's still the old single stitched top. Not sure if they addressed the issue of it pinching the top. If it happens again they will get it back.
#82
Registered User
Thread Starter
Join Date: Sep 2003
Location: florida
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
That's odd. I can't imagine why they would give you the original version of the top. My understanding is that they stopped making that one since all of the new ZR's have the double-stitching.
Doesn't make sense, but like you said, they will get it back if it gets another hole.
Doesn't make sense, but like you said, they will get it back if it gets another hole.
#83
Registered User
Join Date: Oct 2003
Location: Los Angeles
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Went to the dealer today to check on the status of the top. They are replacing the fabric and the bars that are causing the problem, but not replacing the entire top with all the components. I hope I don't have to bring it back again.
Also I noticed that I have numerous eraser shaped holes in my top seen on the inside. They go through one layer but they are symmetric on both sides. Anyone else have this?
Also I noticed that I have numerous eraser shaped holes in my top seen on the inside. They go through one layer but they are symmetric on both sides. Anyone else have this?
Originally posted by 350zRoadster04
That's odd. I can't imagine why they would give you the original version of the top. My understanding is that they stopped making that one since all of the new ZR's have the double-stitching.
Doesn't make sense, but like you said, they will get it back if it gets another hole.
That's odd. I can't imagine why they would give you the original version of the top. My understanding is that they stopped making that one since all of the new ZR's have the double-stitching.
Doesn't make sense, but like you said, they will get it back if it gets another hole.
#84
Registered User
Thread Starter
Join Date: Sep 2003
Location: florida
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Maybe Nissan has figured out a way to "repair" the top without replacing it. The replacement tops are expensive (approx. $4400). I imagine that they wouldn't do too many of these if they don't have to.
Originally posted by jrofman
Went to the dealer today to check on the status of the top. They are replacing the fabric and the bars that are causing the problem, but not replacing the entire top with all the components. I hope I don't have to bring it back again.
Also I noticed that I have numerous eraser shaped holes in my top seen on the inside. They go through one layer but they are symmetric on both sides. Anyone else have this?
Went to the dealer today to check on the status of the top. They are replacing the fabric and the bars that are causing the problem, but not replacing the entire top with all the components. I hope I don't have to bring it back again.
Also I noticed that I have numerous eraser shaped holes in my top seen on the inside. They go through one layer but they are symmetric on both sides. Anyone else have this?
#85
Registered User
Join Date: Dec 2003
Location: Tallahassee, Florida
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 350zRoadster04
If the dealership is dragging their feet, try calling Nissan yourself. 1-800-NISSAN1 -- this seems to be a problem on most early ZR's and you may be able to get a faster response by speaking with them directly. They will give you a file # and will follow-up with you until the issue is successfully resolved.
If the dealership is dragging their feet, try calling Nissan yourself. 1-800-NISSAN1 -- this seems to be a problem on most early ZR's and you may be able to get a faster response by speaking with them directly. They will give you a file # and will follow-up with you until the issue is successfully resolved.
#86
New Member
Originally posted by jrofman
Went to the dealer today to check on the status of the top. They are replacing the fabric and the bars that are causing the problem, but not replacing the entire top with all the components. I hope I don't have to bring it back again.
Also I noticed that I have numerous eraser shaped holes in my top seen on the inside. They go through one layer but they are symmetric on both sides. Anyone else have this?
Went to the dealer today to check on the status of the top. They are replacing the fabric and the bars that are causing the problem, but not replacing the entire top with all the components. I hope I don't have to bring it back again.
Also I noticed that I have numerous eraser shaped holes in my top seen on the inside. They go through one layer but they are symmetric on both sides. Anyone else have this?
#87
Registered User
Join Date: Dec 2003
Location: Tallahassee, Florida
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Here are the photos of my top. Well I finally beat the system. NNA is making the Tampa dealer ship the top to Thomasville so this whole mess should be over very soon!!!!
#90
Registered User
Join Date: Jul 2003
Location: Detroit Metro
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Roadster Top Serial Number
Originally posted by agereg
It was the first 200 made 6/03 to 8/03 I believe.
It was the first 200 made 6/03 to 8/03 I believe.
#91
Banned
Join Date: May 2003
Location: East Peoria, Illinois
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Re: Roadster Top Serial Number
Originally posted by jminor
I have the old top and my serial number is 2106 made 7/03 if that helps.
I have the old top and my serial number is 2106 made 7/03 if that helps.
#92
Registered User
Join Date: Jul 2003
Location: Detroit Metro
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: Roadster Top Serial Number
Originally posted by mrice
thanks, my # is 2370 and I have the wear. Is yours showing wear yet?
thanks, my # is 2370 and I have the wear. Is yours showing wear yet?
#93
Registered User
Join Date: Aug 2003
Location: Oakland, Ca
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Just had a call from the Service manager at Serramonte Nissan, the service rep checked out the top on Saturday, agreed that there was significant wear (the white under fabric is showing through the blue canvas) but never mentioned it again. So I emailed the Gen'l Manager and he passed me to the Ser manager and they are ordering a new top! Says there is a TSB about 2 wks old and the ser rep should have been aware of it. I also inquired on the OEM 18" wheels, was told there is no true paint color available but they are willing to have the body shop 'make' up some touch up paint for them. Now my only concern is the Bose system, couldn't find out if I have the 'BAD' or 'good' one,
Build date of 06/03.
Build date of 06/03.
#94
Registered User
Join Date: Jul 2003
Location: arizona
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by pisces9ca
Just had a call from the Service manager at Serramonte Nissan, the service rep checked out the top on Saturday, agreed that there was significant wear (the white under fabric is showing through the blue canvas) but never mentioned it again. So I emailed the Gen'l Manager and he passed me to the Ser manager and they are ordering a new top! Says there is a TSB about 2 wks old and the ser rep should have been aware of it. I also inquired on the OEM 18" wheels, was told there is no true paint color available but they are willing to have the body shop 'make' up some touch up paint for them. Now my only concern is the Bose system, couldn't find out if I have the 'BAD' or 'good' one,
Build date of 06/03.
Just had a call from the Service manager at Serramonte Nissan, the service rep checked out the top on Saturday, agreed that there was significant wear (the white under fabric is showing through the blue canvas) but never mentioned it again. So I emailed the Gen'l Manager and he passed me to the Ser manager and they are ordering a new top! Says there is a TSB about 2 wks old and the ser rep should have been aware of it. I also inquired on the OEM 18" wheels, was told there is no true paint color available but they are willing to have the body shop 'make' up some touch up paint for them. Now my only concern is the Bose system, couldn't find out if I have the 'BAD' or 'good' one,
Build date of 06/03.
#95
Registered User
Join Date: Jul 2003
Location: arizona
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Noted multiple holes (1 all the way through). C alled nissan and they arranged appt with my dealer. It took 2 trips (1 to photograph the damage to send back to nissan in order to get the correct parts. Result--6 days later the entire top including the mech. is at the dealer and will be installed friday. I was expecting a long run around but nissan stepped up to the plate.
#96
Registered User
Join Date: Dec 2003
Location: Tallahassee, Florida
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Great to hear that somebody is getting taken care of by Nissan. That sure hasn't been the case for me! This has been going on since October and still no new top even though they claim it's on its way!
#99
Registered User
Join Date: Feb 2003
Location: Germantown, TN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I have a build date of 7/30 and 4000 miles. I now have the pin holes in my top and the dealer in Memphis is not helping at all. I need to know from anyone who has replaced the top, how you did so and is it good as new. Thanks
#100
Registered User
Thread Starter
Join Date: Sep 2003
Location: florida
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Call Nissan Corp. and let them know about the problem you're having. They will help. This is a common problem among ZR's built in June and July.
Originally posted by gvoeller
I have a build date of 7/30 and 4000 miles. I now have the pin holes in my top and the dealer in Memphis is not helping at all. I need to know from anyone who has replaced the top, how you did so and is it good as new. Thanks
I have a build date of 7/30 and 4000 miles. I now have the pin holes in my top and the dealer in Memphis is not helping at all. I need to know from anyone who has replaced the top, how you did so and is it good as new. Thanks