EVO-R fog light install HELP
#1
Registered User
Thread Starter
Join Date: Mar 2012
Location: Sonoma County, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
EVO-R fog light install HELP
For those who have done this, please pat me on the head and tell me it will be alright....
I am installing the EVO-R fog light on my 370Z.
Please confirm that the only thing that holds the light onto the car is the double-sided tape.
I find it hard to believe that the tape does the work of the two bolts on the old dummy housing (which is discarded?).
Really? I need to be told it won't fall off when I hit a bump somewhere.
TIA. / Greg
I am installing the EVO-R fog light on my 370Z.
Please confirm that the only thing that holds the light onto the car is the double-sided tape.
I find it hard to believe that the tape does the work of the two bolts on the old dummy housing (which is discarded?).
Really? I need to be told it won't fall off when I hit a bump somewhere.
TIA. / Greg
#2
Banned
iTrader: (2)
I've not seen this kit.However,the use of 3-M tape if done correctly is pretty damn strong.Rear spoilers are installed all the time with 3-m.
Make sure the surface is clean(use rubbing alcohol).Remove the red backing. Heat up the tape surface and the surface
you are applying the part to with a hair dryer.Press it on hard.You are done...
Make sure the surface is clean(use rubbing alcohol).Remove the red backing. Heat up the tape surface and the surface
you are applying the part to with a hair dryer.Press it on hard.You are done...
Last edited by JCITY; 04-22-2012 at 04:55 PM.
#3
Registered User
Thread Starter
Join Date: Mar 2012
Location: Sonoma County, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, JCITY, that's EXACTLY what I wanted! (nt)
This board's software doesn't take empty messages?! I guess using "nt" in the title is useless then.
Thread
Thread Starter
Forum
Replies
Last Post