Notices
Audio & Video 350Z Mobile entertainment and other electronics

dash kit for an 06

Thread Tools
 
Search this Thread
 
Old May 19, 2006 | 11:23 PM
  #61  
evobunny's Avatar
evobunny
Registered User
iTrader: (1)
 
Joined: Sep 2005
Posts: 532
Likes: 0
From: louisiana
Default

Originally Posted by TheProfessional
Hey great pics Stephen! I know what you mean about the gap I have the same problem with my 1997 Alpine 3DA-W880 in my 06' see: https://my350z.com/forum/audio-and-video/166573-10-year-old-head-unit-replaces-stock-2006-a.html

I love the Avic-Z1, I am assuming you did the install yourself? Did you get the Bluetooth hookup and Satellite?? How does the navigation work for you????

(BTW, I saw your name on your keychain)
Thanz, I figure you saw my name on my keychain. Yes I did the install myself with a friend help who works in a car audio store. Didnt take as long as I thought it would be. 8 hours for installing nav, 2pair of component speaker, back up cam, and Ipod interface, and ran wires for everything and for 2 amps.

No i didnt get the bluetooth hook up, cause I dont have bluetooth phone yet. And as for as the satellite, Im guessing your talking about xm nav traffic right. Well I didnt get that either cause it doesnt work in my small city. That only works in big city. But Im thing about getting sirus for it.

And the Nav works great, I love it. I think the voice control thing is so good. It works like a charm. Like addresses in your address book you can put how the word should be pronounce so it wont have any problem picking it up when you say it.

Last edited by evobunny; May 19, 2006 at 11:30 PM.
Reply
Old May 19, 2006 | 11:28 PM
  #62  
evobunny's Avatar
evobunny
Registered User
iTrader: (1)
 
Joined: Sep 2005
Posts: 532
Likes: 0
From: louisiana
Default

Originally Posted by Voboy
to be honest, I don't think its that bad at all! Definately gonna install my headunit without the 05 kit now. Will buy the 06 when it comes out.
Yes the gap is not that bad, I dont even notices it anymore. Some of my friends didnt even notice it when they frist saw the nav. All they notice was like cool I can watch stuff in you car now. So for sure go ahead and install without it, and just wait for it to come out.
Reply
Old May 20, 2006 | 09:00 AM
  #63  
TheProfessional's Avatar
TheProfessional
New Member
iTrader: (14)
 
Joined: Jan 2006
Posts: 1,777
Likes: 0
From: Arkansas
Default

Yeah theres a lot of people that say the Z1 is horrible with the nav... but you said it has no problem in a small town even. Do you notice any missing streets?

what kind of component speakers did you install? do you notice a big difference?

also, I like that shift **** what is that? I could not get mine to come off!
Reply
Old May 20, 2006 | 06:02 PM
  #64  
zman1910's Avatar
zman1910
Registered User
iTrader: (3)
 
Joined: Jan 2005
Posts: 1,895
Likes: 0
From: NY
Default

Got everything installed on my 06 with a custom dash kit that looks better than any regular dash kit. Very exciting. I'll have pics up either tonight or tomorrow...

Equipment - Kenwood DDX-6019 with NAV, ID 10" subwoofer, Kicker ZX300.1 amplifier

Sounds fantastic - I didn't know one 10" ID subwoofer can hit so hard
Reply
Old May 21, 2006 | 09:25 PM
  #65  
Cyp's Avatar
Cyp
Registered User
iTrader: (3)
 
Joined: Jul 2003
Posts: 394
Likes: 0
From: Bay Point
Default

how much is the part(cover) that just goes around the double din?
Reply
Old May 22, 2006 | 01:03 AM
  #66  
evobunny's Avatar
evobunny
Registered User
iTrader: (1)
 
Joined: Sep 2005
Posts: 532
Likes: 0
From: louisiana
Default

Originally Posted by TheProfessional
Yeah theres a lot of people that say the Z1 is horrible with the nav... but you said it has no problem in a small town even. Do you notice any missing streets?

what kind of component speakers did you install? do you notice a big difference?

also, I like that shift **** what is that? I could not get mine to come off!
Well I leave in a nice size town (city), we had grow alot over the last two years, we have streets getting redone all the time here getting two lane change to 4 lanes and stuff like.

And I dont really see any problem with the nav. Sometime it give me different routes that I wont normally take to get to where im going (faster my way), but the nav would give me, cause I guess it want to stick to main and bigger roads. which is smart I guess. Over all so far no problem, I need to go to a bigger city like houston to test it out more.

And for the speaker question I got polk MOMO Components all around. For the bang for the bucks, they are really good. I still havnt mess with my amp that it is hook up to and they are still pretty loud. Amp is still on stock setting. But the bad thing is no bass, all mid and highs. Well that what I wanted anyway cause Im getting subs anyway.

This is what I install in my car all in 8 hours.


The shift **** is a momo shift **** for a automatic. But Im sure you can put it on a stardard if you want. You cant even tell that it is a botton on top. Here is a better pic.


If you have a auto shift **** all you have to do is pop that small gray plastic piece down, then push that pin out, and up comes the ****.

Hope that answer all your question.

Last edited by evobunny; May 22, 2006 at 01:12 AM.
Reply
Old Jun 3, 2006 | 08:46 AM
  #67  
wldkatz03's Avatar
wldkatz03
Registered User
iTrader: (20)
 
Joined: Mar 2006
Posts: 874
Likes: 0
From: Rancho Santa Margarita, CA
Default

still nothing?
Reply
Old Jun 3, 2006 | 09:04 AM
  #68  
CaliforniaZman's Avatar
CaliforniaZman
Registered User
 
Joined: Apr 2006
Posts: 155
Likes: 0
From: Modesto California
Default

I couldnt wait, I had them put the old mount in, it looks shabby but they are going to install the 06 one when it gets released.
Reply
Old Jun 6, 2006 | 09:27 PM
  #69  
M-V's Avatar
M-V
Registered User
 
Joined: Sep 2005
Posts: 167
Likes: 0
From: El Monte, CA
Default

The wait is killing me.
Reply
Old Jun 7, 2006 | 01:39 AM
  #70  
Derek's Avatar
Derek
Registered User
 
Joined: May 2006
Posts: 69
Likes: 0
From: Nashville, TN
Default

I'm running the factory Clarion HU right now thru an Audio Control LC6 and it sounds amazingly good. Go ahead and get all your other gear installed and just use the factory head until the kit is available. That's been my plan but I'm so pleased with how clean the factory head is that I might just keep it.
Reply
Old Jun 7, 2006 | 11:04 AM
  #71  
mlg9770's Avatar
mlg9770
Sponsor
ZEnclosures
iTrader: (89)
 
Joined: Oct 2004
Posts: 398
Likes: 0
From: Florida
Default

I just called Metra again....they said its not done yet and they have no idea when it will be ready. I'll keep checking back with them.

Mike
Reply
Old Jun 8, 2006 | 11:20 AM
  #72  
SmokyTyrz's Avatar
SmokyTyrz
Registered User
 
Joined: Oct 2005
Posts: 690
Likes: 0
From: Louisiana, USA
Default

Contact user jdohman. He and his guys at Tweeter modified a kit to fit my
W200 excellently.

Reply
Old Jun 8, 2006 | 11:25 AM
  #73  
cbr900son's Avatar
cbr900son
New Member
15 Year Member
iTrader: (4)
 
Joined: Mar 2006
Posts: 3,804
Likes: 0
From: Lafayette LA
Default

wow very nice fit from the pic
Reply
Old Jun 8, 2006 | 11:28 AM
  #74  
SmokyTyrz's Avatar
SmokyTyrz
Registered User
 
Joined: Oct 2005
Posts: 690
Likes: 0
From: Louisiana, USA
Default

Looks even better in real life! :-)
Reply
Old Jun 8, 2006 | 11:44 AM
  #75  
91ZCpe's Avatar
91ZCpe
New Member
iTrader: (1)
 
Joined: Oct 2005
Posts: 363
Likes: 0
From: Fairfax, VA
Default

are there any adapters for the steering wheel audio controls when you install an aftermartket h/u? i asked people at best buy and they said you can get them from the dealership..but thatll prob cost an arm and a leg..i know crutchfield used to have them but i dont see them on the website anymore
Reply
Old Jun 8, 2006 | 12:02 PM
  #76  
usmanasif's Avatar
usmanasif
Registered User
iTrader: (4)
 
Joined: Aug 2005
Posts: 4,046
Likes: 1
From: Mile High City
Default

Yes, you can easily get those adapters. Google them or go to www.mp3car.com. I am at work right now or I would've posted the link; it's on my home PC.
Reply
Old Jun 8, 2006 | 12:10 PM
  #77  
wldkatz03's Avatar
wldkatz03
Registered User
iTrader: (20)
 
Joined: Mar 2006
Posts: 874
Likes: 0
From: Rancho Santa Margarita, CA
Default

Originally Posted by SmokyTyrz
Contact user jdohman. He and his guys at Tweeter modified a kit to fit my
W200 excellently.

probably the best i've seen so far...i just wish that they could match the lines exact, curves and all...but great install how do you like the screen?
Reply
Old Jun 8, 2006 | 12:55 PM
  #78  
91ZCpe's Avatar
91ZCpe
New Member
iTrader: (1)
 
Joined: Oct 2005
Posts: 363
Likes: 0
From: Fairfax, VA
Default

Originally Posted by usmanasif
Yes, you can easily get those adapters. Google them or go to www.mp3car.com. I am at work right now or I would've posted the link; it's on my home PC.
thanks
Reply
Old Jun 8, 2006 | 03:07 PM
  #79  
SmokyTyrz's Avatar
SmokyTyrz
Registered User
 
Joined: Oct 2005
Posts: 690
Likes: 0
From: Louisiana, USA
Default

Love it!
Reply
Old Jun 8, 2006 | 03:08 PM
  #80  
SmokyTyrz's Avatar
SmokyTyrz
Registered User
 
Joined: Oct 2005
Posts: 690
Likes: 0
From: Louisiana, USA
Default

Originally Posted by usmanasif
Yes, you can easily get those adapters. Google them or go to www.mp3car.com. I am at work right now or I would've posted the link; it's on my home PC.
I'd like to get in on this too for the next batch of install work. Please do post this link! I know OEM Pac is usually where folks source the interface from. But if you have a p/n for the Z that would rock!

Thx!
Reply



All times are GMT -8. The time now is 09:09 AM.