When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey. Quick note.. on the subwoofer part. If you are wanting to use the stock location you may want to do a 8" woofer instead of a 10" Doing a 8" w3 or somethign along those lines will enable to enclosure to look better in the stock part. A 10" the way it angles can not be to deep and goes from all the way at the top to all the way to the bottom.
www.innovativerides.com did a 350z roadster with a Peerless XLS10" in that stock location. Mounting depth was 4 5/8" and the motor structured tapered enough to allow it to sit on the same plane as the rest of the body lines.
They also did the white 350z below with the same subwoofer. The sealed enclosure is a 0.4ft³ made out of fiberglass.
![[]V[]addog's Avatar](https://my350z.com/forum/images/avatars/30.jpg)
