04lemansZ

iTrader: (3)

Is it possible to fit a 12" W7 under the strut bar in the rear. if so does anybody have pics of it. thanks

dragone2717

iTrader: (4)

That might have to be custom.... Try NAZAR in the classifields.

350zspl

iTrader: (3)

why do you feel it won't fit

Pokémon

iTrader: (28)

Havn't seen it.

dragone2717

iTrader: (4)

The air space that sub needs. Putting it in a box under the strut will not give it the proper air space it needs unless you make thing out of fiber glass. Or lose the spare and bury it.... Thats my plan for the 13w7 I wanna put in. 10w7 doesn't cut it for me anymore.

350zspl

iTrader: (3)

how much air space sealed does the W7 12" need

how much air space does the understrut for the single 12" provide ?

04lemansZ

iTrader: (3)

i dont want to get rid of the spare in case i have a flat. i just found a killer deal on a 12" W7 and wondered if it would fit under the strut bar.

CRIDDA

iTrader: (10)

Its possible with fiberglass, check these guys out. Tell them that Walter's(eclipse on there page) friend Chris refered you, they do good work.
www.AudioTrixOnline.com

They are off sandy plains.

350zspl

iTrader: (3)

you asking the same ?

i have responded trying to help you

if your not gonna read my response and answer than i can;t help

CRIDDA

iTrader: (10)

Ill answer for him. It needs 1.375 cu. ft. / 38.94 liters

doug

iTrader: (5)

i don't think its much a problem of air space.. its that the 12" doesn't fit under the strut bar with a box.. the diameter is too large.. thats why most 12 under the strut boxes i have seen have the sub opening sticking outside of the strut bar opening..

04lemansZ

iTrader: (3)

thats exactly the problem.

CRIDDA

iTrader: (10)

It should fit between the seats and the bar at an angle or even rear facing like doug posted below, I havent tried, but know almost anything is possible with fiberglass. Once again go to the link I put up and see if they would do something for you and they are local.

doug

iTrader: (5)

if you wanted a single 12 .. you would have to have it built something like this



thats from http://www.tccustomz.com i'm sure if you talk to them they could build you a single 12 sticking out like that

350zspl

iTrader: (3)

i guess i am confused

what i am gathering is the poster wants a
1 each 12" w7
1 each under strut bar

if the sub needs 1.375 for 1 each 12" sealed

i next need to know how much space the single 12" under strut bar provides

so i can see the difference that needs to be made up

dragone2717

iTrader: (4)

Really the best thing to do is go to a shop that does custom work and tell them what you want to do.... Anything is possible and if they tell you they can't, Then they are lying. Go somewhere else and get it done.

04lemansZ

iTrader: (3)

thanks for all the inputs

350zspl

iTrader: (3)

get the Rd Audio Classic

works sealed very well

in that space of the single 12" understrut box

get a RD 1000.1 to push it

and you be banging so hard, so clean , so low

and again for less $ than a w7 & jl amp

i got the RD hook up

Driven1

iTrader: (2)

A W7 12" will require a custom box for the location you're requesting. Not only that but if you're putting a W7 in there it needs to be very well reinforced (especially if it's fiberglass). I have 1 12" Kicker which I like alot. Here's a horrible pic (sorry it's the only one's I have right now in my office) of my box that I built with 2 TV's one on each side of the sub.

350zspl

iTrader: (3)

it aint possible to build a ported box to spec that will fit under bar



you trying to squeeze 10 pounds of **** in a 5 pound bag