tomtom one help
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: SC , PA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
tomtom one help
hey i just got a tomom one but it doesnt fit in cuby...
is there any smaller suction cup mount for tomtom?
cuz i read some of u guys have tomtom one in cuby, but how?
is there any smaller suction cup mount for tomtom?
cuz i read some of u guys have tomtom one in cuby, but how?
#3
New Member
iTrader: (26)
I'm not sure if this will work, but give it a try:
http://www.*********.com/zwiki/Garmi...350Z_cubbyhole
if it removes the main website, its at 350z tech with a dash in between.
http://www.*********.com/zwiki/Garmi...350Z_cubbyhole
if it removes the main website, its at 350z tech with a dash in between.
#5
New Member
Your TomTom is small enough to easily fit inside the upper/forward cubby. Check the mount they call "ProClip." It's designed for shallow and versatile mounting. You may need to do some custom fabrication, but it will fit.
--Spike
--Spike
#7
New Member
^^ Here is the web page.
http://www.tomtom-proclip.com/?secti...p_leftorright=
It appears the mount is narrow enough to fit the cubby space. I think you will need to fabricate your own mounting plate. I wouldn't drill into the back of the cubby. It would be better to make your own plate and drill into that. Then attach it with double-sided tape. or any adhesive pad that releases when heated (hair dryer).
--Spike
http://www.tomtom-proclip.com/?secti...p_leftorright=
It appears the mount is narrow enough to fit the cubby space. I think you will need to fabricate your own mounting plate. I wouldn't drill into the back of the cubby. It would be better to make your own plate and drill into that. Then attach it with double-sided tape. or any adhesive pad that releases when heated (hair dryer).
--Spike
Trending Topics
#9
New Member
^^ The mount I referenced protrudes < 1.5”. That fits with room to spare. Of course you need to do a minor custom fabrication job (making a base/plate that you screw the ProClip mount into). Your “custom fabricated” base/plate is then attached to the rear wall of the upper/forward cubby (using double-sided tape or any adhesive pad that will release when applying heat so that it is a reversible installation).
The Garmin mount you bought will work as well. You may need to do a little custom fabrication on this piece.
--Spike
The Garmin mount you bought will work as well. You may need to do a little custom fabrication on this piece.
--Spike
#11
Originally Posted by typerilliard
hey i just got a tomom one but it doesnt fit in cuby...
is there any smaller suction cup mount for tomtom?
cuz i read some of u guys have tomtom one in cuby, but how?
is there any smaller suction cup mount for tomtom?
cuz i read some of u guys have tomtom one in cuby, but how?
btw, the S has bluetooth to manage the phones
#12
Registered User
iTrader: (9)
Originally Posted by surfcity40
I just put in the TOMTOM One XL S text-to-speech in the cubby perfectly with the provided suction mount and mounting disc. It mounts sideways and aims the unit a bit to the driver. Perfect fit. Looks almost like it came with the car.
btw, the S has bluetooth to manage the phones
btw, the S has bluetooth to manage the phones
#13
Originally Posted by GeauxLadyZ
Surf just out of pure curiosity--you have any pics of this mounted? id like to see what it looks like.
Last edited by surfcity40; 04-08-2008 at 01:31 PM.