i have a 10 inch sub and it is too small for the bracket behind the driver seat. i was wondering what subs you guys use for it besides the stock bose sub. i was doing some search but couldnt find much. thanks

 

Most people I believe don't do a direct replacement of that sub. They remove it and put a new sub in a different location. A stealthy install is then to put the amps in this cubby hole and no one knows they're there.

 

thanks..anybody else know of subs that people put in that work//???

 

kicker 10s will fit, i just got one installed in mine, fits in stock location just fine

 

I would like to see someone mount a sub in the stock location, and seal the entire area up with something lightweight like expanding foam.

 

thanks do you have the exact model number of it or a link because theres so many diff ones

 

measure the hole, and then start looking for subs with similar cutout diameter.. post it here maybe we can help you out.

 

from the inside of the hole to the other side it is 9 1/2 inches.

From one skrew across to the other side is about 10 3/4 inches.

 

I wouldnt worry about the mounting holes.. just look for something with a similar cutout diameter and then just drill your own holes.

 

Its a kicker CV-R 10 inch

 

sounds good guys thanks

 

+1 i used to have that sub in the stock location, but i had to make a fiberglass panel to fit over it. Sounded good to after all the stuffing and dynomat

 

ps....i had to make a 10" ring out of mdf for the mounting part

 

looks good. what was the ring for? was the sub too small for the holes. that was my problem

 

yea. the holes for the sub were sitting right on the edge of metal

 

Confirmed -- 10 inch Infinity sub does not fit in stock location -- need custom MDF bracket. The mounting plate was a hair to big.

 

yeahi just used carpet adn dynomated around it, getting those bose panel to cover it up and make it clean and stockish

 

yea i think no matter what 10" sub you put in your have to make a mdf ring. i would do that anyway just so it dont rattle the metal bracket as much