first ill start off with what im putting in: im installing infinity reference components up front and i recently got ahold of some infinity 2 ways and i decided to put them in the rear. my original plan was to just run the door components off of my jl audio 300/4 on 2 channels.but since i have these other infinity 2 ways, my question is how should i wire the 2 rear speakers; with the factory wiring or connect them into the wiring that is going from the amp to the crossovers.

thanks for any input

 

If you really want rears, I think you should connect the rears to your external amp, and run this in 4 channel mode.

But... Do you have SubW's?

--Spike

 

yeah i have 2 jl 10w3v3-4's inside of a jl stealth box that i will be adding


but my question is would it sound ok even if i dont have a crossover for the 3rd and 4th channel on the rears

 

^^ I'm confused?

You don't have crossovers for your rear component speakers?

Sorry if I'm wasting time here.

--Spike

 

yeah i never bought a set of components for the rear i was only going to do a front stage setup and now ive decided to install these

 

OK… I get it.

Since the stock OEM rears are coaxials, and you are installing two-way components in the rear, you will need to do some additional wiring. That’s easy. Of course, you connect your new rears directly to your aftermarket external amp.

--Spike