Hi guys,
I'm going to replace my Bose HU with a Pioneer double din dvd player. After doing research, I learned that I will need two items below. What else do I need to make it work with all the control buttons on the steering wheel? Thanks in advance.

- PAC ROEM-NIS2 harness
- Metra dash kit

 

I just replaced my BOSE HU with the AVH-3300BT. Used the ROEM-NIS2 that you mentioned as well. Simple install, works great.

For steering wheel controls i think you can use either PAC SWI-PS or Metra Axxess ASWC. Since you're already using a PAC module, i'd stick with PAC to PAC. I dont have the steering wheel controls on mine, so I didn't have to get this extra module.

 

Thanks Jerz350.

I had my hu installed, and now ready to get the steering wheel interface. Would somebody confirm this is the one I need, because i see there are several different one.

Check this out on AMZN: SWI&PS - PAC Steering wheel control interface for Pioneer and Sony NEW Version 1.6.8 with Bluetooth http://amzn.com/B004P7N236