Notices
Audio & Video 350Z Mobile entertainment and other electronics

FREE! GTMat Automotive Sound Deadener

Thread Tools
 
Search this Thread
 
Old 08-16-2012 | 03:42 PM
  #1  
GTMat's Avatar
GTMat
Thread Starter
Vendor - Former Vendor
 
Joined: Jul 2012
Posts: 85
Likes: 0
From: Austin, TX
Default FREE! GTMat Automotive Sound Deadener

Hello Z community! Our newly launched company is interested in your reviews and opinions on our product. For a limited time we are offering 10 sq ft of our GTMat Pro product for FREE. In order to take advantage of this offer, you will need to contact us via phone at 1-855-GT-SOUND and request your free sample as well as provide your name and shipping address (US addresses only, sorry). We would appreciate reviews on our product as well as installation pictures if possible.





GTMAT Automotive Sound Dampening is a discount alternative to leading sound deadener brands, with prices at nearly half the cost of Dynamat Xtreme!

GTMAT Features

Impressive Bass Improvement
Nominal 50/80 Mil Thick
4 Mil Aluminum Shield
High-Temp Superior Adhesion
Kill Unwanted Noise, Rattles, Vibrations
Reduce Distortion
Reduce Exhaust and Engine Noise
Easy Application
Flexible, Plyable, Malleable
Overlap Layers for Additional Vibration Dampening
Use Anywhere - Doors, Trunks, Side Panels, Hoods, Roofs, Firewalls, Floors
Paintable Surface
Patented Rubberized Compound
Durable, Waterproof, Permanent
Adheres to Most Any Surface Instantly
Sound AND Heat Insulation
Massive DB & SPL Gains
Low Cost Solution
Tested, Proven, Guaranteed
Toll Free Support 1-855-GT-SOUND


Information on our product as well as demo videos can be found at: https://www.youtube.com/user/GTSound...?feature=watch

Last edited by GTMat; 08-16-2012 at 04:36 PM.
Old 08-16-2012 | 04:26 PM
  #2  
bmccann101's Avatar
bmccann101
350Z-holic
Premier Member
iTrader: (16)
 
Joined: Aug 2006
Posts: 8,246
Likes: 414
From: Scottsdale/coyote drophouse
Default

^ no gimmicks, i called and they are sending out 10 sq ft for free.

I was not asked to pay for shipping. +1 so far.. pretty cool.

Ill do my Chrysler 300s trunk and if i dig the stuff, ill get at you for my 350z.
Old 08-16-2012 | 04:33 PM
  #3  
GTMat's Avatar
GTMat
Thread Starter
Vendor - Former Vendor
 
Joined: Jul 2012
Posts: 85
Likes: 0
From: Austin, TX
Default

Originally Posted by bmccann101
^ no gimmicks, i called and they are sending out 10 sq ft for free.

I was not asked to pay for shipping. +1 so far.. pretty cool.

Ill do my Chrysler 300s trunk and if i dig the stuff, ill get at you for my 350z.
Thanks for giving us a shot bmccann101!

We have a few people testing it out on the 370z model right now but still awaiting reviews. The only thing we are asking from people is to help us gain reviews and provide product feedback.
Old 08-16-2012 | 04:41 PM
  #4  
350ZTheStandard's Avatar
350ZTheStandard
Registered User
iTrader: (4)
 
Joined: May 2007
Posts: 9,022
Likes: 3
From: NEW AMERICA
Default

going to call in the morning, I spose they are closed now.
Old 08-16-2012 | 04:42 PM
  #5  
bmccann101's Avatar
bmccann101
350Z-holic
Premier Member
iTrader: (16)
 
Joined: Aug 2006
Posts: 8,246
Likes: 414
From: Scottsdale/coyote drophouse
Default

I.just called

And they just posted
.hit it up
.
Old 08-16-2012 | 05:01 PM
  #6  
twistiert's Avatar
twistiert
Registered User
iTrader: (1)
 
Joined: Dec 2010
Posts: 197
Likes: 0
From: PA
Default

I just placed my order. Can't wait to try it out and if it is good I'll be ordering more because the guy on the phone gave me a great price!
Old 08-16-2012 | 06:17 PM
  #7  
JCITY's Avatar
JCITY
Banned
iTrader: (2)
 
Joined: Apr 2011
Posts: 3,274
Likes: 1
From: GEORGIA
Default

Tried to call..closed
Will try again in the a.m.
Checked out their Utube video.
This stuff looks just like the material
Lowes sells...for roofing applications.
Works great(cheap)in my car.THe downside is the tar odor for
the first few days.Then its completely done.
The video is a bit lame.You could put a piece of anything
like 3-M on something that resonates.It will deaden the sound.
Strange
Old 08-16-2012 | 07:10 PM
  #8  
Collin Lacy's Avatar
Collin Lacy
Registered User
 
Joined: Jun 2012
Posts: 189
Likes: 0
Default

Do you guys do like, heat tests? I hear horror stories of deadener melting and leaking out the bottom of doors with some budget materials.

Though I guess mccann is in Arizona so he can do some testing of his own.
Old 08-16-2012 | 09:55 PM
  #9  
bmccann101's Avatar
bmccann101
350Z-holic
Premier Member
iTrader: (16)
 
Joined: Aug 2006
Posts: 8,246
Likes: 414
From: Scottsdale/coyote drophouse
Default

This is a truth^
.I ran a big audio shop for ten years... seen.it all. I'll certainly do a decent review
Old 08-17-2012 | 08:33 AM
  #10  
GTMat's Avatar
GTMat
Thread Starter
Vendor - Former Vendor
 
Joined: Jul 2012
Posts: 85
Likes: 0
From: Austin, TX
Default

Originally Posted by JCITY
Tried to call..closed
Will try again in the a.m.
Checked out their Utube video.
This stuff looks just like the material
Lowes sells...for roofing applications.
Works great(cheap)in my car.THe downside is the tar odor for
the first few days.Then its completely done.
The video is a bit lame.You could put a piece of anything
like 3-M on something that resonates.It will deaden the sound.
Strange
Hah, we are not video editors/creators obviously. We just launched our company and are offering the free samples for feedback and reviews. The more people we can get to try it out, the better we can build our product!
A couple of our employees have this installed in their cars. We have had no complaints from them or customers about tar odor.

Originally Posted by Collin Lacy
Do you guys do like, heat tests? I hear horror stories of deadener melting and leaking out the bottom of doors with some budget materials.

Though I guess mccann is in Arizona so he can do some testing of his own.
Here is a YouTube video of a heat test we performed.

Texas is hot and so far none of our employee demo cars have had issues with melting or leaking product.



If anyone else would like to give us a shot, please give us a call to request your sample.
Old 08-17-2012 | 12:29 PM
  #11  
OkashiZ's Avatar
OkashiZ
Registered User
iTrader: (11)
 
Joined: Feb 2010
Posts: 1,121
Likes: 0
From: Long Beach
Default

I just called and placed my order. Going to be doing a a video review of the install and of the sound deadening quality ( hopefully going to cut down on the rear wheel noise when it picks up little rocks). They also have this stuff for sale on amazon so those of you who try it should give them a review on there too to help get their foot in the door.
Old 08-18-2012 | 07:16 AM
  #12  
richee3's Avatar
richee3
Registered User
iTrader: (1)
 
Joined: May 2012
Posts: 107
Likes: 0
From: Evansville, In
Default

I just made the call to try this stuff out. I have my Celica insulated with Frost King duct insulation, cheap but effective. I've been looking into replacing it with something better as well as getting started on my Z and I stumbled across this thread. I'll definitely try it out over the rear fenders in the Z and see how it does. I anticipate good things and I'll be more than happy to leave good reviews wherever I can.
Old 08-19-2012 | 12:07 PM
  #13  
GTMat's Avatar
GTMat
Thread Starter
Vendor - Former Vendor
 
Joined: Jul 2012
Posts: 85
Likes: 0
From: Austin, TX
Default

We look forward to everyone's reviews and pictures! The free sample offer is still running for those interested.
Old 08-20-2012 | 12:32 PM
  #14  
350ZTheStandard's Avatar
350ZTheStandard
Registered User
iTrader: (4)
 
Joined: May 2007
Posts: 9,022
Likes: 3
From: NEW AMERICA
Default

Phones are almost always busy, paid off to be patient. Thank You
Old 08-20-2012 | 12:37 PM
  #15  
GTMat's Avatar
GTMat
Thread Starter
Vendor - Former Vendor
 
Joined: Jul 2012
Posts: 85
Likes: 0
From: Austin, TX
Default

Originally Posted by 350ZTheStandard
Phones are almost always busy, paid off to be patient. Thank You
Sorry about that! We joined a couple of forums and maybe put up too many posts. If you have any trouble getting through but are interested, please send me a PM!

-Tracie
GTMat
Old 08-20-2012 | 11:34 PM
  #16  
OkashiZ's Avatar
OkashiZ
Registered User
iTrader: (11)
 
Joined: Feb 2010
Posts: 1,121
Likes: 0
From: Long Beach
Default

just got it today, review will follow in a bit
Old 08-21-2012 | 08:24 AM
  #17  
GTMat's Avatar
GTMat
Thread Starter
Vendor - Former Vendor
 
Joined: Jul 2012
Posts: 85
Likes: 0
From: Austin, TX
Default

Originally Posted by OkashiZ
just got it today, review will follow in a bit
Looking forward to it! Thanks for taking the time to compare us to Dynamat and provide feedback.
Old 08-21-2012 | 04:30 PM
  #18  
Bruno350z's Avatar
Bruno350z
Registered User
iTrader: (1)
 
Joined: Jul 2012
Posts: 440
Likes: 0
From: Rosemead
Default

Hmm, this may or may not be a stupid question but; would it stop my trunk from rattling because of my subs? If it would, where exactly would I put the GTMat to stop it from rattling?
Old 08-22-2012 | 07:57 AM
  #19  
GTMat's Avatar
GTMat
Thread Starter
Vendor - Former Vendor
 
Joined: Jul 2012
Posts: 85
Likes: 0
From: Austin, TX
Default

Originally Posted by Bruno350z
Hmm, this may or may not be a stupid question but; would it stop my trunk from rattling because of my subs? If it would, where exactly would I put the GTMat to stop it from rattling?
Hi Bruno350z! Unfortunately I don't have much experience when it comes to handling sub vibrations but I'm sure someone here can chime in. The biggest complaints we have been receiving from 350/370 owners is the pings on the wheel wells when driving over debris.
Old 08-22-2012 | 10:30 AM
  #20  
Bruno350z's Avatar
Bruno350z
Registered User
iTrader: (1)
 
Joined: Jul 2012
Posts: 440
Likes: 0
From: Rosemead
Default

Originally Posted by GTMat
Hi Bruno350z! Unfortunately I don't have much experience when it comes to handling sub vibrations but I'm sure someone here can chime in. The biggest complaints we have been receiving from 350/370 owners is the pings on the wheel wells when driving over debris.
Thanks anyways bro, any other insight would be appreciated by anyone



All times are GMT -8. The time now is 11:41 AM.