Thumping noise from JL bass 10 W6 V2
um... its a subwoofer, thats what its supposed to do... are you looking to make the sub less loud? If so, what headunit do you have? My alpine has built in sub controls; if yours doesn't, most amps come with a **** you can attach to control bass...
what kind of headunit do you have?
sounds like that you have a stock headunit and have a problem with remote. if that is the case, try to get hands on remote turn-on relay.
it should solve your problem.
sounds like that you have a stock headunit and have a problem with remote. if that is the case, try to get hands on remote turn-on relay.
it should solve your problem.
Thanx everyone
problem solved
the guy at circuit city installed the remote wire wrong
he probably hooked up the remote to the small amp of the sub somehow when ever ignition is on the amp also goes on even the alpine deck is off
so when i turn on the deck the amp already on so it kick in a loud noise - and that is badddddddd
so they had to rerun the new remote blue wire straight from the alpine deck and it stop
thanx again everyone, it was a loudddddddd clik when turn on
problem solved
the guy at circuit city installed the remote wire wrong
he probably hooked up the remote to the small amp of the sub somehow when ever ignition is on the amp also goes on even the alpine deck is off
so when i turn on the deck the amp already on so it kick in a loud noise - and that is badddddddd
so they had to rerun the new remote blue wire straight from the alpine deck and it stop
thanx again everyone, it was a loudddddddd clik when turn on
Thread
Thread Starter
Forum
Replies
Last Post
wanderingstuden
Maintenance & Repair
6
Jan 28, 2016 07:03 PM





