New experimental Powder coated Strut tower enclosure
10-29-2004, 09:21 AM
#1
New experimental Powder coated Strut tower enclosure
Here is the newest experiment we are working on, We have a local Powder coating facility, They have done pretty well for us . I just wanted to get everones opinion. The same finish can be applied for the flat enclosures for that custom look. The cost of this is a lot less then getting it painted. Yes the Paint will have more of a gloss and shine However you can put a coat of clear if wanted or desired on top of the Powder Coat.
The picture is fresh out of the shop the box was still warm when we took the pictures.
There was no body work done on this enclosure, came from the fiberglass shop and straight to PC shop. With some more attention to this enclosure it will be to our satisfaction. So the picture is Not the final product, although it looks real good. For better pictures go to http://www.wickedcas.com/index.php?o...llery&catid=27
The picture is fresh out of the shop the box was still warm when we took the pictures.
There was no body work done on this enclosure, came from the fiberglass shop and straight to PC shop. With some more attention to this enclosure it will be to our satisfaction. So the picture is Not the final product, although it looks real good. For better pictures go to http://www.wickedcas.com/index.php?o...llery&catid=27
Last edited by Nazar; 10-29-2004 at 09:30 AM.
10-29-2004, 01:50 PM
#4
Registered User
iTrader: (2)
Join Date: Sep 2004
Location: New Jersey
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
The setup looks real nice but are you running all 3 of them in one great big enclosure instead of giving them all their own seperate enclosures? 
Won't that do quite a hit on sound quality?
Won't that do quite a hit on sound quality?
10-29-2004, 02:23 PM
#5
Registered User
iTrader: (1)
Join Date: Dec 2003
Location: TN
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
my question for nazar the great is can you recreate this
https://my350z.com/forum/showthread....threadid=17603
Even though I know you mainly do under strut enclosers there is nothing ive ever seen that comes close to that setup.
Since i dont use the trunk id like to have something like that
LookS Sick to Me!
https://my350z.com/forum/showthread....threadid=17603
Even though I know you mainly do under strut enclosers there is nothing ive ever seen that comes close to that setup.
Since i dont use the trunk id like to have something like that
LookS Sick to Me!
10-29-2004, 03:25 PM
#6
Originally posted by Srivero297
The setup looks real nice but are you running all 3 of them in one great big enclosure instead of giving them all their own seperate enclosures? Won't that do quite a hit on sound quality?
The setup looks real nice but are you running all 3 of them in one great big enclosure instead of giving them all their own seperate enclosures?
Won't that do quite a hit on sound quality?
10-29-2004, 03:29 PM
#7
Originally posted by SvR350z
my question for nazar the great is can you recreate this
https://my350z.com/forum/showthread....threadid=17603
Even though I know you mainly do under strut enclosers there is nothing ive ever seen that comes close to that setup.
Since i dont use the trunk id like to have something like that
LookS Sick to Me!
my question for nazar the great is can you recreate this
https://my350z.com/forum/showthread....threadid=17603
Even though I know you mainly do under strut enclosers there is nothing ive ever seen that comes close to that setup.
Since i dont use the trunk id like to have something like that
LookS Sick to Me!
Here is a Supra trunk from our website to give you an idea of our shop.
More pics are at www.wickedcas.com under picture gallery.
Trending Topics
10-29-2004, 04:37 PM
#9
Registered User
iTrader: (1)
Join Date: Dec 2003
Location: TN
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Nazar,
To recreate that encloser to fit 2 jl subs and amps how much money are you talking?
I mean im not going to break the bank for an encloser but if its within reason then i might consider.
Also, Im sure you would know this better than me but would i have to yank all the factory stuff to get a setup like that to work?
Id like to just redo my factory subs and such with Jl audio but have no idea if they will fit in the factory locations.
Im noob
To recreate that encloser to fit 2 jl subs and amps how much money are you talking?
I mean im not going to break the bank for an encloser but if its within reason then i might consider.
Also, Im sure you would know this better than me but would i have to yank all the factory stuff to get a setup like that to work?
Id like to just redo my factory subs and such with Jl audio but have no idea if they will fit in the factory locations.
Im noob
10-29-2004, 05:22 PM
#10
New Member
iTrader: (7)
Join Date: May 2002
Location: Atlanta
Posts: 4,959
Likes: 0
Received 0 Likes
on
0 Posts
there is new powdercoating technology that can be used on wood, mdf and plastic. 400degrees is the standard powdercoat temp, but these new ones work at lower temps, like 250.
10-30-2004, 06:49 AM
#13
Originally posted by SvR350z
Nazar,
To recreate that encloser to fit 2 jl subs and amps how much money are you talking?
I mean im not going to break the bank for an encloser but if its within reason then i might consider.
Also, Im sure you would know this better than me but would i have to yank all the factory stuff to get a setup like that to work?
Id like to just redo my factory subs and such with Jl audio but have no idea if they will fit in the factory locations.
Im noob
Nazar,
To recreate that encloser to fit 2 jl subs and amps how much money are you talking?
I mean im not going to break the bank for an encloser but if its within reason then i might consider.
Also, Im sure you would know this better than me but would i have to yank all the factory stuff to get a setup like that to work?
Id like to just redo my factory subs and such with Jl audio but have no idea if they will fit in the factory locations.
Im noob
The problem with that is it is allready done, I don't want to feel like I am stealing someone elses idea. Maybe something similar, But we will not do the same exact install. That is just not right for the person who came up with it first. We can create something similar But not the same.
Anyone local wants to volunteer their car for this? There is great benefits on labor cost for the first one.
Nazar
10-30-2004, 07:39 AM
#15
Registered User
iTrader: (1)
Join Date: Dec 2003
Location: TN
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Nazar,
We are talking about spare tire install.
The fact that it has been done once isnt in question.
However, The fact that the people that done it the first time wont do it again means we have to have someone to make it.
I dont care if its exact but for me to buy it then it would have to be darn close.
I think people would buy this encloser. Since i have never used a spare tire in my life I cant see the need of having it there.
Id rather have some subs and amps
Anyways, If you come up with something close then let me know.
We are talking about spare tire install.
The fact that it has been done once isnt in question.
However, The fact that the people that done it the first time wont do it again means we have to have someone to make it.
I dont care if its exact but for me to buy it then it would have to be darn close.
I think people would buy this encloser. Since i have never used a spare tire in my life I cant see the need of having it there.
Id rather have some subs and amps
Anyways, If you come up with something close then let me know.
10-30-2004, 07:40 AM
#16
Originally posted by jcn30127
Nazar,
Twice I have submitted sincere requests for specific product
information on your web site. One recently.
I know I should probably telephone you, right?
Why do you offer this option (email inquiry) on your web site?
Nazar,
Twice I have submitted sincere requests for specific product
information on your web site. One recently.
I know I should probably telephone you, right?
Why do you offer this option (email inquiry) on your web site?
Update, Problem Solved, e-mail designation was wrong. I will get them from now on. Thanx for pointing it out.
Last edited by Nazar; 10-30-2004 at 08:15 AM.
07-13-2005, 06:56 AM
#18
Originally Posted by unstable
Hey Nazar mind if I get a price for one of the 3 sub magic box's ship'd to NY...
Also can the double box be made with square openings for the Kickers?
Also can the double box be made with square openings for the Kickers?
The box for 3x10" is $499 Shipped to NY. Without the paint.
07-13-2005, 07:32 AM
#19
Registered User
iTrader: (4)
Join Date: Nov 2004
Location: SoCal
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
nazar,,have you come up with a design for two 12's. i know alot of people on this board want that deeper bass.Any chance this fiberglass understrut box can be molded for two 12's.thnx
07-13-2005, 09:37 AM
#20
Originally Posted by sbcbaseball
nazar,,have you come up with a design for two 12's. i know alot of people on this board want that deeper bass.Any chance this fiberglass understrut box can be molded for two 12's.thnx