And so it begins... my first complete build
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Feb 2008
Location: Panama City Beach, FL
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
And so it begins... my first complete build
What im starting with:
Source:
Pioneer Premier F90-BT
The Goods:
1X JL Audio W7 10
1X JL Audio 500/1
1X JL Audio 300/4
1X Hertz HSK-163 3-way components
1X Tsunami 2 Farad Capacitor
2X Tsunami RCA's
Tsunami 4awg power and ground
Tsunami 8awg speaker wire 2X 6ft runs
Monster Audio 14awg THX Ultra600 speaker wire
Ok, so i had the W7 in the car for a bit and was very dissapointed with the clarity and output i was getting out of the ZEnclosure i had purchased. many have been very satisfied with their ZEnclosure's so maybe its just that the W7 dosnt like to be sealed or maybe i got a lemon or something even though it appeared to be made very well. either way, Its time for some porting action
i moddified the ZEnclosure pretty heavily.
TO HELL WITH TERMINALS, so i removed the terminals on the side opting for some straight 8awg wire running through a piece of mdf.
HORRAY PORTS, i added a slot port on the side with the terminals that had internal measurments of 4x1.5 (OD of 5.5x3) tuned to 32hz
more to come when i get home... leaving class now
Source:
Pioneer Premier F90-BT
The Goods:
1X JL Audio W7 10
1X JL Audio 500/1
1X JL Audio 300/4
1X Hertz HSK-163 3-way components
1X Tsunami 2 Farad Capacitor
2X Tsunami RCA's
Tsunami 4awg power and ground
Tsunami 8awg speaker wire 2X 6ft runs
Monster Audio 14awg THX Ultra600 speaker wire
Ok, so i had the W7 in the car for a bit and was very dissapointed with the clarity and output i was getting out of the ZEnclosure i had purchased. many have been very satisfied with their ZEnclosure's so maybe its just that the W7 dosnt like to be sealed or maybe i got a lemon or something even though it appeared to be made very well. either way, Its time for some porting action
i moddified the ZEnclosure pretty heavily.
TO HELL WITH TERMINALS, so i removed the terminals on the side opting for some straight 8awg wire running through a piece of mdf.
HORRAY PORTS, i added a slot port on the side with the terminals that had internal measurments of 4x1.5 (OD of 5.5x3) tuned to 32hz
more to come when i get home... leaving class now
Last edited by adamtaylorpcb; 12-03-2008 at 08:49 AM.
#3
Registered User
Thread Starter
iTrader: (7)
Join Date: Feb 2008
Location: Panama City Beach, FL
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
whats wrong with monster? the thx ultra 600 stuff is supposed to be really good shiit
has better ratings than any of the car specific stuff i could find
•CL3 Rated for In Wall Installation
•70 FT of Length
•Heavy Duty DuraFlex Jacket for Maximum Protection
•LPE Dielectric Reduces Signal Loss & Large Gauge Precision Wound Strandings for Greater Overall Clarity
•Time Correct Windings and Patented Magnetic Flex Tube
just have a few pics i managed to snap before my criminal research methods final today
has better ratings than any of the car specific stuff i could find
•CL3 Rated for In Wall Installation
•70 FT of Length
•Heavy Duty DuraFlex Jacket for Maximum Protection
•LPE Dielectric Reduces Signal Loss & Large Gauge Precision Wound Strandings for Greater Overall Clarity
•Time Correct Windings and Patented Magnetic Flex Tube
just have a few pics i managed to snap before my criminal research methods final today
#4
Registered User
Thread Starter
iTrader: (7)
Join Date: Feb 2008
Location: Panama City Beach, FL
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
New stuff on the chopping block
since the w7 needs a 1" baffle and the ZEnclosure thats "made for the w7" only has a 3/4" baffle... time for a speaker ring
while im at it im going to make a port finisher on the outside so i dont just have a open hole.
recessing the x-overs in the amp rack with plexi and backlighting them
since the w7 needs a 1" baffle and the ZEnclosure thats "made for the w7" only has a 3/4" baffle... time for a speaker ring
while im at it im going to make a port finisher on the outside so i dont just have a open hole.
recessing the x-overs in the amp rack with plexi and backlighting them
Trending Topics
#9
Registered User
Thread Starter
iTrader: (7)
Join Date: Feb 2008
Location: Panama City Beach, FL
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
trying to find a camera, my dad borrowed mine to go to texas
it sounds at least 4x louder and 2x cleaner so im thrilled, wasnt even sure if it was going to work out
it sounds at least 4x louder and 2x cleaner so im thrilled, wasnt even sure if it was going to work out
#10
Registered User
Thread Starter
iTrader: (7)
Join Date: Feb 2008
Location: Panama City Beach, FL
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE!
Heres the few i did manage to take before my camera got hijacked
MMMMmmmm 8awg
Dampen much?
Dohh! took too much carpet on the left of the ring
the x-overs will be at 60* angles on either end
yes i cleaned all of the saw dust off before i installed them
i feel kinda bad, in my flurry of installing stuff i found a blue under car kit and decided.... WHY NOT? so i added at least 8 more Rice points for that one... but hey, it looks good with the 8000k parking lights and the blue led's back lighting the x-overs
i need to expect more of the "hey Tokyo Drift (or DK), betcha that things fast" to which i always reply "My Ferrari is faster"
Heres the few i did manage to take before my camera got hijacked
MMMMmmmm 8awg
Dampen much?
Dohh! took too much carpet on the left of the ring
the x-overs will be at 60* angles on either end
yes i cleaned all of the saw dust off before i installed them
i feel kinda bad, in my flurry of installing stuff i found a blue under car kit and decided.... WHY NOT? so i added at least 8 more Rice points for that one... but hey, it looks good with the 8000k parking lights and the blue led's back lighting the x-overs
i need to expect more of the "hey Tokyo Drift (or DK), betcha that things fast" to which i always reply "My Ferrari is faster"
Last edited by adamtaylorpcb; 12-06-2008 at 09:32 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM