So how did the new dyno go????

cheers,

richie

 

had my dyno done this morning
and guess what......

I did not make much if at all gain!!!!!!!!!!!!!!

the best they can pull is 183.3kw, but most were ~181kw

the guy who origional did the base dyno is off today, and they ask me to come back next day so that the same person can do the dyno, as they dont know how the base was done...

I think they had stuffed up the origional dyno, as everyone here know its way too high to have a base of 181kw
now I will hv to go by what other people's gain on the HT (~17kw?? cant remember)

anyone suggest another place for dyno?

 

C&V Motorsport
Complex 34-36 Odea ave Waterloo
Phone: (02) 9690 2000

 

had my dyno done this morning and guess what...... I did not make much if at all gain!!!!!!!!!!!!!! the best they can pull is 183.3kw, but most were ~181kw

I'd be interested to know if they did the dyno run in the "shootout" mode (ie. as your 1st dyno)? The post hi-tech dyno numbers seem to agree with what the other people are getting here, but that was NOT in the shootout-mode.

So, 1st thing I would check is whether the new dyno-run printout has the "shootout mode" on it as the previous one. If not then I'd go back (to the same place) and get them to run in again, but in shootout-mode this time (oreferably by the same person).

The other option is that they did everything correctly (oe as before), and that you did not make any gains. Though, you'd be the 1st person to have those results.

 

Before I dyno today I asked if they can dyno both in shootout mode and standard mode, but the answer is they can only do shootout mode, and is the only mode they use