Putnam Park Roadcourse 8-9
Thread Starter
Registered User
iTrader: (16)
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
NASA is having an event at Putnam Park on the 8-9. I will be attending this event and was going to ask if anyone else is. I've been once before back in the summer and I had a great time. The track is very fun to drive and only has one wall. So, if you runoff then you are going to go into grass, unless you screw up on the last turn.
https://www.nasaproracing.com/nasa_e.../?event_id=277
https://www.nasaproracing.com/nasa_e.../?event_id=277
I'll be there. Group 2, looking to move to group 3 that week-end.
Last time (also with NASA) I was runing the re040 tire. Now on my Azenis, it should be a bit faster ! hehehe.
I'll be with the guys with the race Hondas.
For those who are undecided, I have a onboard the Z video of Putnam on my website. www.alexandre-malouin.com
Last time (also with NASA) I was runing the re040 tire. Now on my Azenis, it should be a bit faster ! hehehe.
I'll be with the guys with the race Hondas.
For those who are undecided, I have a onboard the Z video of Putnam on my website. www.alexandre-malouin.com
Thread Starter
Registered User
iTrader: (16)
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Originally Posted by Kolia
I'll be there. Group 2, looking to move to group 3 that week-end.
Last time (also with NASA) I was runing the re040 tire. Now on my Azenis, it should be a bit faster ! hehehe.
I'll be with the guys with the race Hondas.
For those who are undecided, I have a onboard the Z video of Putnam on my website. www.alexandre-malouin.com
Last time (also with NASA) I was runing the re040 tire. Now on my Azenis, it should be a bit faster ! hehehe.
I'll be with the guys with the race Hondas.
For those who are undecided, I have a onboard the Z video of Putnam on my website. www.alexandre-malouin.com
Hey it's this week-end!
Time for an oil/filter change and brake pads swap!
I forgot about your question. I'm running 235/40r18 and 255/40r18. A bit underdriven.
Time for an oil/filter change and brake pads swap!
Originally Posted by thawk408
I will be group 2. What size tires did you go with?
I forgot about your question. I'm running 235/40r18 and 255/40r18. A bit underdriven.
Thread Starter
Registered User
iTrader: (16)
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Originally Posted by Kolia
Hey it's this week-end!
Time for an oil/filter change and brake pads swap!
I forgot about your question. I'm running 235/40r18 and 255/40r18. A bit underdriven.
Time for an oil/filter change and brake pads swap!
I forgot about your question. I'm running 235/40r18 and 255/40r18. A bit underdriven.
Last edited by thawk408; Oct 6, 2005 at 07:30 AM.
Trending Topics
Have fun guys! Hope you get some serious track time in. I was disapointed with the minimal time I got when I ran with NASA at Mid-Ohio.
Off topic, Kolia, did you get the Race Technology DL1 to work?
Also, start thinking about the Glen next July.
Off topic, Kolia, did you get the Race Technology DL1 to work?
Also, start thinking about the Glen next July.
Thread Starter
Registered User
iTrader: (16)
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Originally Posted by EnthuZ
Have fun guys! Hope you get some serious track time in. I was disapointed with the minimal time I got when I ran with NASA at Mid-Ohio.
Off topic, Kolia, did you get the Race Technology DL1 to work?
Also, start thinking about the Glen next July.
Off topic, Kolia, did you get the Race Technology DL1 to work?
Also, start thinking about the Glen next July.

I've run with a bunch of clubs. I've enjoyed running with Lotus Corps & PCA the most. 4, 1/2 hour sessions per day. BMW CCA also allows about the same amount of track time. I'm looking into a 3 day event at Watkins Glen for next year. I can't recommend CarGuys.
A bunch of us ran Putnam with the Indy Mustang club last year, and, well, let's just say that we all decided to pass on running with them this year. Fun track though. I'm a little bit uncomfortable running with clubs that have NO corner workers.......only a spotter at the start/finish line.
A bunch of us ran Putnam with the Indy Mustang club last year, and, well, let's just say that we all decided to pass on running with them this year. Fun track though. I'm a little bit uncomfortable running with clubs that have NO corner workers.......only a spotter at the start/finish line.
EnthuZ No I haven’t had time to fully connect my DL1. I trying to find a connector on the main harness to branch off a couple probe signals.
Nice to have met you thawk408. Your setup is pretty effective, considering you were still running the re040, your Z was pretty fast! I would have had to drive really hard to keep up with you (correct tire pressure would have helped, I was way to hard). I ran 1:29 while chasing you, I don’t know if you had a lap timer, but it gives you an idea of your times.
The event was fun. But there was way to much traffic in our group. I’d prefer to have small groups and do only 3 good runs. I managed to get only one almost clean lap on Saturday… Sunday was better, with a warmer track and less cars. But still hard to get a clean run. My third Sunday session was the best one. The Integra I was chasing lost it in turn 4 during the warm up lap. Go figure what he was thinking?! So I managed to run by my self for a good section. I have that run on video and will be posting it shortly.
I can’t wait to get my new suspension!
Let me know if you guys want to go to MidOhio. It’s 45 minutes from my place, so lodging would be supah cheap ;-)
Nice to have met you thawk408. Your setup is pretty effective, considering you were still running the re040, your Z was pretty fast! I would have had to drive really hard to keep up with you (correct tire pressure would have helped, I was way to hard). I ran 1:29 while chasing you, I don’t know if you had a lap timer, but it gives you an idea of your times.
The event was fun. But there was way to much traffic in our group. I’d prefer to have small groups and do only 3 good runs. I managed to get only one almost clean lap on Saturday… Sunday was better, with a warmer track and less cars. But still hard to get a clean run. My third Sunday session was the best one. The Integra I was chasing lost it in turn 4 during the warm up lap. Go figure what he was thinking?! So I managed to run by my self for a good section. I have that run on video and will be posting it shortly.
I can’t wait to get my new suspension!
Let me know if you guys want to go to MidOhio. It’s 45 minutes from my place, so lodging would be supah cheap ;-)
Here's a funny thing that happenned.
I really don't get it. This is the third session on Sunday. I'm pretty sure the guy was there Saturday also...
Ho well, enjoy !
BadStart at Putnam
I really don't get it. This is the third session on Sunday. I'm pretty sure the guy was there Saturday also...
Ho well, enjoy !
BadStart at Putnam
Thread Starter
Registered User
iTrader: (16)
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Originally Posted by Kolia
EnthuZ No I haven’t had time to fully connect my DL1. I trying to find a connector on the main harness to branch off a couple probe signals.
Nice to have met you thawk408. Your setup is pretty effective, considering you were still running the re040, your Z was pretty fast! I would have had to drive really hard to keep up with you (correct tire pressure would have helped, I was way to hard). I ran 1:29 while chasing you, I don’t know if you had a lap timer, but it gives you an idea of your times.
The event was fun. But there was way to much traffic in our group. I’d prefer to have small groups and do only 3 good runs. I managed to get only one almost clean lap on Saturday… Sunday was better, with a warmer track and less cars. But still hard to get a clean run. My third Sunday session was the best one. The Integra I was chasing lost it in turn 4 during the warm up lap. Go figure what he was thinking?! So I managed to run by my self for a good section. I have that run on video and will be posting it shortly.
I can’t wait to get my new suspension!
Let me know if you guys want to go to MidOhio. It’s 45 minutes from my place, so lodging would be supah cheap ;-)
Nice to have met you thawk408. Your setup is pretty effective, considering you were still running the re040, your Z was pretty fast! I would have had to drive really hard to keep up with you (correct tire pressure would have helped, I was way to hard). I ran 1:29 while chasing you, I don’t know if you had a lap timer, but it gives you an idea of your times.
The event was fun. But there was way to much traffic in our group. I’d prefer to have small groups and do only 3 good runs. I managed to get only one almost clean lap on Saturday… Sunday was better, with a warmer track and less cars. But still hard to get a clean run. My third Sunday session was the best one. The Integra I was chasing lost it in turn 4 during the warm up lap. Go figure what he was thinking?! So I managed to run by my self for a good section. I have that run on video and will be posting it shortly.
I can’t wait to get my new suspension!
Let me know if you guys want to go to MidOhio. It’s 45 minutes from my place, so lodging would be supah cheap ;-)
I am very interested about going to MidOhio. Is it with NASA?
What new suspension are you getting?
Thread Starter
Registered User
iTrader: (16)
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Originally Posted by Kolia
Here's a funny thing that happenned.
I really don't get it. This is the third session on Sunday. I'm pretty sure the guy was there Saturday also...
Ho well, enjoy !
BadStart at Putnam
I really don't get it. This is the third session on Sunday. I'm pretty sure the guy was there Saturday also...
Ho well, enjoy !
BadStart at Putnam
Thread Starter
Registered User
iTrader: (16)
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
Jun 19, 2022 06:30 PM
Subarism
East Canada
0
Sep 23, 2015 06:22 PM



