excellent writeup!

i'll remove my wiper sometime this week

 

how has it handeled the rain thus far? an leaks? I only ask because I am going to install a carbonfiber deck and I do not want the rear wiper blade installed on it, but a was told most of them leak with a stopper. please let me know the update.

 

I have had mine done with a "stopper" now for at least a year and have had no leaks at all.

 

Did a water test 2 hours after applying the silicone. No leaks. Washed the car 1 hour later. Still no leaks. 10 hours later, God himself decided to give it a test. Still no leaks.

Just make sure you treat the underside of the hatch with plenty of silicone. Thats pretty much the most important part.

 

Thanks a lot, i found it but that plug is huge though.

 

okay great thanks! now I need to find a piece of carbon fiber to place on top of the cap.

 

Hey guys just got done doing this mod. Love it. I painted the plug which matches pretty damn well using factory KY0 and clearcoat.

Anyways...onto the pics. Very cheap and easy install.

btw...car is filthy!!! Sorry!

 

I Removed My Rear Wiper Six Or Seven Months Ago, I Used A Black Door Plug From Tahoe That My Buddy Was Doing A Radio Install On At His Stereo Shop. It Fit Like A Dream, No Modifying Needed. The Tahoe Was Like An 04-03 And The Part Was Not Even Missed By The Owner Its A Little Dust Plug

 

Let me know if you find any CF piece that can go on top of it. I was going to send my out to member here to get it wrap with CF but he doesnt do that anymore

 

Are you talking about one of those little covers that goes on the front or rear bumper?

So it sounds like, you went to your buddies shop. You noticed one of the plugs in the bumper. You thought "that will look tight on my ride". You said to your buddy "yo, you mind if I pop this off and stick it on my car". Your buddy replied "naw, the owner'll never miss it". Then you proceeded to punch it out of the Tahoe and put it on your car.
True?

 

sure will. and if you come across anything please pass the info my way.

 

I plan on using this method on the rear wiper but I am installing a carbon fiber deck and I dont want to put the nissan hamburger on. So are there any good plugs to use for the two small holes that are pre-drilled for the nissan hamburger?

 

tonyrd1- I found this: http://cgi.ebay.com/ebaymotors/LARGE...mZ220254633156

if you want to go in on it let me know.

 

PAUL350Z, i wanna thank you for making this a very easy mod for me, it only took $2 and about 10 minutes, thanks alot....

 

Nice Write up.. Just did mine and it took about 15 minutes.. it balances the car well without the wiper.

 

I dont get this f++++++ squirter out..

 

Now WHY would you guys wanna do that??? Maybe it's the weather down here, but my rear wiper is a super plus in my Zed! Perhaps it's my age (59); "expediency over form" set in a long time ago, in my life. Practicality over image, dudes!!!

 

i just read your msg and that sounds like exactly what happened, you must have been watchin. lol but yeah that someone would never see it missing

 

this is my first car with a rear wiper, and honestly its kind of useless. It only gets half of the window, and its angled enough that the water will just run off it if you keep it rainx'ed.. :/

 

how big is this stopper? i went to a home depot and all i could find where these 1 3/4 one which kinda looked to big to me....Help im super bored and looking to do this today