When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It seems like there are a lot of guys who have done this mod....if you dont mind me asking. What do you guys think a good price for the brembro's is? what have you guys paid ect?
thanks
The server is currently down, but try mynismo.com and click on factory parts. It will take you to their "detailed" online guide of parts. It should give you all the information you need. GL
can anybody tell me the size and length of the bolts used for the rear calipers? any help would be greatly appreciated!
Same length 35mm
Same Diameter: 12mm
Thread pattern has changed from fine to medium 1.75
The bolt is a grade 6, if you go to ace they have this patter
Tell them you need a 12mm 1.75x35mm grade 5 bolt
I looked everywhere for a grade 6, the dealer had them only. They were $4 a piece, The bolts from ace were just over a doller. The tensile strength from grade 5 to 6 is not enough to worry about. From what I heard, just brakes uses the bolts all the time when doing caliper repairs.
If I'm switching my 03 OEM brakes with some guy who has brembos, we can reuse eachothers parts right? Or is there anything else that I will need to purchase?
Does anyone know the torque specs for the caliper mounting bolts? I need to get some 22mm to do this and wondering if i need 3/8 or 1/2 drive sockets? Would i also need a wrench or will the socket wrench suffice?
Does anyone know the torque specs for the caliper mounting bolts? I need to get some 22mm to do this and wondering if i need 3/8 or 1/2 drive sockets? Would i also need a wrench or will the socket wrench suffice?
As far as a socket or wrench - if you're using anything to torque it to spec then stick with whatever it is and whatever size that is. -use whatever works.