Who has a setup with just BBK up front? Any feedback pls.
Thanks

 

me. Love it.

 

Me too. You will burn through rear pads very quickly on the track, but if that doesn't bother you (they're cheap to replace) and the kit is set up with proper balance, a front only kit can be great.

Here's a good article on rear BBK's:
http://www.stoptech.com/tech_info/wp...upgrades.shtml

 

Very interesting. Thanks for the article link...

 

Good article Jeff!

 

You really don't need the rear kit unless you track your car all the time. I know because I have one and it makes very little difference. I had the front BBK first and it was an awesome addition. The rear BBK added little braking feel only more ability to dissapate heat.

 

does stoptech make a stock application fit for the z? basically looking for stock caliper size and rotors, but a stoptech version?
thanks for your help
nexstage350

 

Not to my knowledge, but Jeff (JRitt) could give you more info. StopTech makes replacement rotors in the stock size, but not calipers. You would have to go with a 13" BBK to get Stoptech calipers, rotors, lines and pads.

 

thanks! yeah i was thinking of going ahead and getting the 13" BBK. they should clear the 17" wheels right?

 

They should clear the stock 17" wheels. However, you may want to get the specs from Jeff if you have different wheels.

 

stoptech's articles are very good
learning is achieving

 

AP front kit only on my car.....absolutely the best mod I did