ArizonaZCar Wilwood 4-Pot Front BBK Installed
#42
Registered User
Join Date: Feb 2005
Location: Arizona
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
line lock and proportioning valve
Originally Posted by gringott
Question for Dave @ Arizona Z car : How does the hydralic line lock (that you mentioned on G35 forum for $29) fit into the system if we go with the rear kit also? Meaning, what all is involved in the install? Is it very difficult?
Not a big job if you know your way around brake systems.
My rear kit works great without all that if you dont need a parking brake and want to retain the stock ABS and plumbing.
To engage the line-lock you would hold the brake pedal down with medium pressure
and push down on the button, when you take your foot off , pressure remains in the rear calipers and the car wont roll. To release the LL just push on the brake pedal again and the button pops up. I've have had a lot of requests
for a really nice mechanical caliper for the parking brake so I'm looking at manufacturing them in house in the near future as time allows.
Dave
ARIZONA Z CAR
2043 E. QUARTZ ST.
MESA AZ 85213
480-844-9677
dave@arizonazcar.com
www.arizonazcar.com
#47
Registered User
iTrader: (5)
Join Date: Jul 2003
Location: Northern California
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
AZC:
Do the rotor centers come only in the color shown in the pics or can you do them in black... They are adonized, yes?
Also... Why this slotted rotor design?
Thanks in advance...
Do the rotor centers come only in the color shown in the pics or can you do them in black... They are adonized, yes?
Also... Why this slotted rotor design?
Thanks in advance...
#48
Registered User
Join Date: Feb 2005
Location: Arizona
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Color choice
Originally Posted by Endless Shock
AZC:
Do the rotor centers come only in the color shown in the pics or can you do them in black... They are adonized, yes?
Also... Why this slotted rotor design?
Thanks in advance...
Do the rotor centers come only in the color shown in the pics or can you do them in black... They are adonized, yes?
Also... Why this slotted rotor design?
Thanks in advance...
Asymetrical slots were done to cut down resonance, we might do some custom slotting in the future like these.
Dave
ARIZONA Z CAR
2043 E. QUARTZ ST.
MESA AZ 85213
480-844-9677
dave@arizonazcar.com
www.arizonazcar.com
#49
Registered User
iTrader: (9)
Originally Posted by AZC
I have the centers on the shelf with red anodize, I could strip some and do another color for what it costs (usually $75 ) would be cheaper to do several at once.
Asymetrical slots were done to cut down resonance, we might do some custom slotting in the future like these.
Dave
ARIZONA Z CAR
2043 E. QUARTZ ST.
MESA AZ 85213
480-844-9677
dave@arizonazcar.com
www.arizonazcar.com
Asymetrical slots were done to cut down resonance, we might do some custom slotting in the future like these.
Dave
ARIZONA Z CAR
2043 E. QUARTZ ST.
MESA AZ 85213
480-844-9677
dave@arizonazcar.com
www.arizonazcar.com
#50
Registered User
iTrader: (5)
Join Date: Jul 2003
Location: Northern California
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Havok_RLS2
How about the standard Slots and dots/holes? You have that in the R&d phase too right?
AZC:
Is that $75 per side or both?
Thread
Thread Starter
Forum
Replies
Last Post