Still rubbing after fender roll
#23
The passenger side rear is rubbing on the fenders. Dont know exactly where since i am driving when its happening.
I got the aligment done today and its still rubbing! Is not rubbing as much, now its only happening during hard bumps ans dips.
With the S-techs i was only able to get it to -2.0 camber on the rears...
I got the aligment done today and its still rubbing! Is not rubbing as much, now its only happening during hard bumps ans dips.
With the S-techs i was only able to get it to -2.0 camber on the rears...
#26
Registered User
Join Date: Aug 2009
Location: Cincinnati
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Setup: 19x8.5 255/40/19 Rear with 33 offset + 25mm spacer.
Problem: Passenger side rear still rubs after fender rolling.
Suspension: Tein S-tech Z specific.
I think its an alignment problem, it rubbed even before i recently installed the s-techs. I did an aggressive fender roll thinking it would solve the problem but still persists.
Can stock rear suspension be out of spec (stock range)?
UPDATES:
I went for an alignment the most the tech could give me was -2.0 camber on the rears.
Also here is a pix of the passenger side rear fender which i think its the part its rubbing.
Problem: Passenger side rear still rubs after fender rolling.
Suspension: Tein S-tech Z specific.
I think its an alignment problem, it rubbed even before i recently installed the s-techs. I did an aggressive fender roll thinking it would solve the problem but still persists.
Can stock rear suspension be out of spec (stock range)?
UPDATES:
I went for an alignment the most the tech could give me was -2.0 camber on the rears.
Also here is a pix of the passenger side rear fender which i think its the part its rubbing.
#27
Does it even touch that area? If so the driver is the same but is not rubbing...
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM