Notices
Brakes & Suspension 350Z stoppers, coils, shocks/dampers

squeaking/creaking rear suspension

Thread Tools
 
Search this Thread
 
Old Mar 21, 2010 | 06:55 PM
  #1  
loquee's Avatar
loquee
Thread Starter
Registered User
 
Joined: May 2008
Posts: 13
Likes: 0
From: arizona
Default squeaking/creaking rear suspension

Hopefully this question has not been answered 100 times before.

My rear suspension is making an annoying sound over uneven surfaces. Almost like a rubber on metal sound. I have checked and greased all bushings and everything seems to be in good condition.
I have Greddy Type-s coilovers with front and rear camber arms. My car is pretty low but no other aftermarket suspension upgrades.
I found an older post that recommended new sway bar end links.
Has anyone else had a similar experience?
Reply
Old Mar 21, 2010 | 07:08 PM
  #2  
davidv's Avatar
davidv
Registered User
iTrader: (2)
 
Joined: Jun 2004
Posts: 42,753
Likes: 11
From: Tucson, AZ
Default

Can you put the car on a lift, and pull on the front and rear? Problem with a product like WD40 is that it will temporary hide a problem not fix it. Good luck.
Reply
Old Mar 22, 2010 | 08:49 AM
  #3  
loquee's Avatar
loquee
Thread Starter
Registered User
 
Joined: May 2008
Posts: 13
Likes: 0
From: arizona
Default

I had the car up on jack stands and everything seemed tight. the only thing that concerned me the most was the the end links did have a lot movement. is that normal? I never really checked them before the noise.
Reply
Old Mar 22, 2010 | 09:05 AM
  #4  
Russ@Z1's Avatar
Russ@Z1
New Member
iTrader: (65)
 
Joined: Oct 2004
Posts: 3,493
Likes: 19
From: georgia
Default

upgrade rear end links
Reply
Old Mar 22, 2010 | 09:18 AM
  #5  
JasonZ-YA's Avatar
JasonZ-YA
350Z-holic
Premier Member
20 Year Member
iTrader: (60)
 
Joined: Jan 2006
Posts: 11,204
Likes: 32
From: San Antonio/I miss DFW, TX
Default

My two best guesses would be the:

1. Endlinks

and

2. The rear after market camber arm to aluminum sub frame lug point. usually these after market camber arms are helm rod end fittings and they make squeak/creak noises...

Spray them with some lithium grease - not WD40. WD is not for outside use....

-J
Reply
Old Mar 22, 2010 | 09:26 AM
  #6  
loquee's Avatar
loquee
Thread Starter
Registered User
 
Joined: May 2008
Posts: 13
Likes: 0
From: arizona
Default

thanks for the advice. the aftermarket lug point is the only thing I did not grease. if this does not work, I guess I'll look into some end links
Reply
Old Mar 23, 2010 | 07:55 AM
  #7  
loquee's Avatar
loquee
Thread Starter
Registered User
 
Joined: May 2008
Posts: 13
Likes: 0
From: arizona
Default

I think it's fixed. Thanks JasonZ-YA for pointing out the camber rod ends.

The 'eyelets' on the spherical rod ends looked to be tweaked way to the side with no room to swivel.With the help of a friend we were able to center up and re-grease the ends. We also took the sway bar bushing out and re-greased them for good measure. Did this last night and took it for a test drive. I didn't hear a sound.
Reply
Old Mar 23, 2010 | 08:55 AM
  #8  
JasonZ-YA's Avatar
JasonZ-YA
350Z-holic
Premier Member
20 Year Member
iTrader: (60)
 
Joined: Jan 2006
Posts: 11,204
Likes: 32
From: San Antonio/I miss DFW, TX
Default

Originally Posted by loquee
I think it's fixed. Thanks JasonZ-YA for pointing out the camber rod ends.

The 'eyelets' on the spherical rod ends looked to be tweaked way to the side with no room to swivel.With the help of a friend we were able to center up and re-grease the ends. We also took the sway bar bushing out and re-greased them for good measure. Did this last night and took it for a test drive. I didn't hear a sound.
yep......been there done that, thats how i knew thats what it was............glad i was able to help..

-J
Reply
Old Mar 25, 2010 | 03:14 PM
  #9  
loquee's Avatar
loquee
Thread Starter
Registered User
 
Joined: May 2008
Posts: 13
Likes: 0
From: arizona
Default

the car sounded great for a day and the sound came back.
Anyone know how to test for worn out end links?
Reply
Old Mar 25, 2010 | 05:09 PM
  #10  
Russ@Z1's Avatar
Russ@Z1
New Member
iTrader: (65)
 
Joined: Oct 2004
Posts: 3,493
Likes: 19
From: georgia
Default

Just disconnect the end links, drive around carefully (not wildly) and see if you notice any squeaks or sounds from the rear.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM




All times are GMT -8. The time now is 07:54 AM.