brembo help
#26
New Member
iTrader: (3)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I took them apart and did the rebuild on them.. you kinda have to get all the hardware out and seals, pistons...all of it has to come out.. it isnt that bad..those bolts that hold the calipers together is NO JOKE for sure.. I had to use a breaker bar and a vise to break them loose..
![](http://i105.photobucket.com/albums/m206/acidjake75/Brembo%20Rebuild%20and%20Install/RearTakenapart2.jpg)
![](http://i105.photobucket.com/albums/m206/acidjake75/Brembo%20Rebuild%20and%20Install/RearTakenapart2.jpg)
Did you reuse the washers that go between the two halves of the calipers? My rebuilder just called me and said I need those replaced in addition to one of the pistons..
I can't find the parts he needs
#29
Registered User
iTrader: (3)
Join Date: Aug 2002
Location: WA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I think the front pistons are Nissan part numbers:
41121-12U00
41121-12U01
not sure which is the 44mm and which is the 38mm
And I believe the rear piston is Nissan part number:
44121-12U00
I don't know that the o-ring gaskets between the caliper halves have replacement parts.
41121-12U00
41121-12U01
not sure which is the 44mm and which is the 38mm
And I believe the rear piston is Nissan part number:
44121-12U00
I don't know that the o-ring gaskets between the caliper halves have replacement parts.
Thread
Thread Starter
Forum
Replies
Last Post
Dark Knight
Wheels Tires
7
11-11-2015 08:40 PM