Ned new pads and rotors on the cheap....
#22
Centric=StopTech/PowerSlot
http://www.stoptech.com/company_info...owerslot.shtml
I replaced my Brembo pads with StopTech Street pads (less than $100 shipped on eBay) and didn't notice any difference in stopping power. Less dust as well.
OP, what happened with that guy calling you out on the intake you sold him?
http://www.stoptech.com/company_info...owerslot.shtml
I replaced my Brembo pads with StopTech Street pads (less than $100 shipped on eBay) and didn't notice any difference in stopping power. Less dust as well.
OP, what happened with that guy calling you out on the intake you sold him?
#25
Should be ordering this or next pay check. Going with the Stoptech pads and Centric rotors, since it's the same damn company as stoptech and the same part for cheaper. I don't want to totally cheap out on this with the ebay no name crap, but I don't want to spend a fortune either. I think this is a good middle of the road setup.
F no I haven't. Was going to go for a week with this chick when she was on spring break, but my lame *** went to work instead.
F no I haven't. Was going to go for a week with this chick when she was on spring break, but my lame *** went to work instead.
Last edited by MyV6IsFast3r; 04-18-2011 at 08:08 AM.
#29
#30
3hree - Go search partsgeek. They have some Centric rotors (w/o black hats) for the Brembos for like 38 a peice for the fronts. Im going to go the middle of the road (black hat) ones. They are something like 60 per for front and 54 rear. I think I priced out 239 shipped for the middle of the road Centric rotors and 330 shipped for the 4 rotors and Stoptech pads. Centric has some cheap pads on there too, and being that stoptech and Centric is the same company you can do the whole thing pretty cheap with all Centric parts.
All in all 330 isn't too bad for middle of the road rotors and pads and will suite me just fine with the occasional peppy driving and AutoX. Zdays is coming up when I get all this in I'l do a write up and 1st impression and then a 2nd impression after Zdays.. Tell ya all how they held up...
All in all 330 isn't too bad for middle of the road rotors and pads and will suite me just fine with the occasional peppy driving and AutoX. Zdays is coming up when I get all this in I'l do a write up and 1st impression and then a 2nd impression after Zdays.. Tell ya all how they held up...
Last edited by MyV6IsFast3r; 04-19-2011 at 12:50 PM.
#31
General & Tech Senior Moderator
MY350Z.COM
MY350Z.COM
iTrader: (74)
3hree - Go search partsgeek. They have some Centric rotors (w/o black hats) for the Brembos for like 38 a peice for the fronts. Im going to go the middle of the road (black hat) ones. They are something like 60 per for front and 54 rear. I think I priced out 239 shipped for the middle of the road Centric rotors and 330 shipped for the 4 rotors and Stoptech pads. Centric has some cheap pads on there too, and being that stoptech and Centric is the same company you can do the whole thing pretty cheap with all Centric parts.
All in all 330 isn't too bad for middle of the road rotors and pads and will suite me just fine with the occasional peppy driving and AutoX. Zdays is coming up when I get all this in I'l do a write up and 1st impression and then a 2nd impression after Zdays.. Tell ya all how they held up...
All in all 330 isn't too bad for middle of the road rotors and pads and will suite me just fine with the occasional peppy driving and AutoX. Zdays is coming up when I get all this in I'l do a write up and 1st impression and then a 2nd impression after Zdays.. Tell ya all how they held up...
Chris
#33
New Member
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
Can't complain. Ordered Wednesday night, shipped Friday, received Tuesday.
#34
New Member
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
Any of you can find what you are looking for here. It'll give you the part numbers to make it easier to find out what you're looking for. Some of those websites that sell don't give the best descriptions.
http://extranet.soleniuminc.com/Cent...NISSAN&mm=350Z
#35
General & Tech Senior Moderator
MY350Z.COM
MY350Z.COM
iTrader: (74)
Yeah, they have slotted rotors.
Any of you can find what you are looking for here. It'll give you the part numbers to make it easier to find out what you're looking for. Some of those websites that sell don't give the best descriptions.
http://extranet.soleniuminc.com/Cent...NISSAN&mm=350Z
Any of you can find what you are looking for here. It'll give you the part numbers to make it easier to find out what you're looking for. Some of those websites that sell don't give the best descriptions.
http://extranet.soleniuminc.com/Cent...NISSAN&mm=350Z
Chris
#36
Yeah, they have slotted rotors.
Any of you can find what you are looking for here. It'll give you the part numbers to make it easier to find out what you're looking for. Some of those websites that sell don't give the best descriptions.
http://extranet.soleniuminc.com/Cent...NISSAN&mm=350Z
Any of you can find what you are looking for here. It'll give you the part numbers to make it easier to find out what you're looking for. Some of those websites that sell don't give the best descriptions.
http://extranet.soleniuminc.com/Cent...NISSAN&mm=350Z
Bringin that purple drank this year to zdays?
#37
New Member
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
I won't make it to ZdayZ this year because I have a lot going on that I need to prepare for. I really wanna go because I missed last years but gotta take care of priorities.
I will definitely be there next year though. Plan on booking the cabin when Bryan tells me the damn date for ZdayZ 2012
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM