I have a S14 with front Brembo brakes and I have a 350Z that does not have brembos. I have searched and have only found the opposite of what I am trying to do, Z brembos on a 240. has anyone here done this swap or have any insight on how much of a pain it will be to swap over?

 

I'm assuming the Brembos on the S14 are from another vehicle. Do you know which?

 

I am sure they are from another vehicle. Unfortunately, I have no clue what car they came off of...

 

That'd be your first step on figuring out if you can put them on the Z. My bet is they are either Sentra SE-R's, STI, or Evo brembo's

 

Rotor size , pictures and info is always good.

 

Any other brakes could fit as long as the rotor thickness used is close to the stock oem brembo rotors. Just make a custom bracket. Very simple stuff

 

I am trying to find a picture on the S14, the Z has the stock non-brembo brakes. Will post it soonest I get it, I am currently home for a funeral and the car is in Ohio where I am stationed. I don't see why I wouldn't be able to do it, if not I will just try and find Z Brembos. as for rotor size, I don't know the actual size, what I do know is, I have 18" wheels and there is a fraction of an inch clearance between the wheel and caliper.

 

Here is a photo of the brake setup.

 

Those look like Z Brembo's to me.