Replacement rotors - Brembo or DBA ?
02-24-2004, 11:00 AM
#3
Hey Dude! I have the slotted dba rotors front and rear. For the price, you cannot go wrong compared to the Brembos. The front rotors are comparable between the two makes; while the rear dba rotors have the improved/smoother air inlet hub design that the front Brembo or dbas have. Dba pricing was only a tick more than one half of the Brembo replacement rotors from Nissan.
HTH
HTH
02-25-2004, 01:51 PM
#6
Registered User
iTrader: (2)
Join Date: May 2003
Location: Northern Ohio
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Not to under cut Victor, but I contacted DBA directly to see if I could buy directly through them. They quoted me a very low price for their rotors, but shipping was $180 and the shipping time was long. On the good side, you would save a couple hundred.
02-25-2004, 03:12 PM
#7
Originally posted by peptidbond
Not to under cut Victor, but I contacted DBA directly to see if I could buy directly through them. They quoted me a very low price for their rotors, but shipping was $180 and the shipping time was long. On the good side, you would save a couple hundred.
Not to under cut Victor, but I contacted DBA directly to see if I could buy directly through them. They quoted me a very low price for their rotors, but shipping was $180 and the shipping time was long. On the good side, you would save a couple hundred.
Thread
Thread Starter
Forum
Replies
Last Post
