FS: Genuine Wilwood 6 piston 14" /4 piston 13" BBK with 2 piece rotors
Thread Starter
Registered User
iTrader: (14)
Joined: Oct 2005
Posts: 255
Likes: 0
From: Jacksonville & Ft Laud, FL
Genuine Wilwood 6 piston 14" /4 piston 13" BBK with 2 piece rotors
Genuine
Wilwood 6 piston 14" front BBK Part # 140-9192
(http://www.summitracing.com/parts/wil-140-9192 ~$1620 )
Wilwood 4 piston 13" rear BBK Part # 140-9507
(http://www.summitracing.com/parts/wil-140-9507 ~$1240 )
Genuine - now, I say Genuine because there are a lot of pieced-together kits that use Wilwood calipers, but neither include their two piece rotor/hat combos, Wilwood mounting brackets, nor their wilwood brake lines.
This kit includes the original wilwood brackets, hats, SS braided lines and rotors.
When I received the kit, I placed some black out stickers as well as reflective red WILWOOD stickers. Beneath the stickers, the regular white lettering exists
The front rotors are reaching the end of their lives - I would consider replacement before taking it to the mountains (I used these up at Z dayz). They were fantastic brakes - I never had fade and never lost confidence in my braking abilities. My tires were always the limiting factor with these brakes.
The rear rotors are in good condition.
The set will come with two sets of pads - one street set (Polymatrix B) and one track set (mountains hehe)
The photos that look darker were taken with flash to show reflection
Fronts
[IMG}http://i157.photobucket.com/albums/t77/Jamaica2G/G35%20parts%20for%20sale/DSC08237.jpg[/IMG]
I messed up this sticker a little bit while compressing the pad
I had purchased a gasket set as I was considering powdercoating the front calipers
Rears
Extra Pads
Asking $1860 OBO ($1000 off normal pricing) PENDING
Three quarts of Motul RBF 600 $25
Wilwood 6 piston 14" front BBK Part # 140-9192
(http://www.summitracing.com/parts/wil-140-9192 ~$1620 )
Wilwood 4 piston 13" rear BBK Part # 140-9507
(http://www.summitracing.com/parts/wil-140-9507 ~$1240 )
Genuine - now, I say Genuine because there are a lot of pieced-together kits that use Wilwood calipers, but neither include their two piece rotor/hat combos, Wilwood mounting brackets, nor their wilwood brake lines.
This kit includes the original wilwood brackets, hats, SS braided lines and rotors.
When I received the kit, I placed some black out stickers as well as reflective red WILWOOD stickers. Beneath the stickers, the regular white lettering exists
The front rotors are reaching the end of their lives - I would consider replacement before taking it to the mountains (I used these up at Z dayz). They were fantastic brakes - I never had fade and never lost confidence in my braking abilities. My tires were always the limiting factor with these brakes.
The rear rotors are in good condition.
The set will come with two sets of pads - one street set (Polymatrix B) and one track set (mountains hehe)
The photos that look darker were taken with flash to show reflection
Fronts
[IMG}http://i157.photobucket.com/albums/t77/Jamaica2G/G35%20parts%20for%20sale/DSC08237.jpg[/IMG]
I messed up this sticker a little bit while compressing the pad
I had purchased a gasket set as I was considering powdercoating the front calipers
Rears
Extra Pads
Asking $1860 OBO ($1000 off normal pricing) PENDING
Three quarts of Motul RBF 600 $25
Last edited by Jamaica2G; Jun 21, 2014 at 05:48 AM.
Trending Topics
Thread Starter
Registered User
iTrader: (14)
Joined: Oct 2005
Posts: 255
Likes: 0
From: Jacksonville & Ft Laud, FL
Sorry guys. I am on G35driver and LIFE most of the time, I am sorry to take so long.
The brakes are currently pending to a local - that includes fluids and seals. I should know in the next couple of days.
Once again, pardon the lack of response. Please forgive me.
Adrian
The brakes are currently pending to a local - that includes fluids and seals. I should know in the next couple of days.
Once again, pardon the lack of response. Please forgive me.
Adrian
Last edited by Jamaica2G; Jun 25, 2014 at 09:10 AM. Reason: Spelling & gramatical errors
Thread Starter
Registered User
iTrader: (14)
Joined: Oct 2005
Posts: 255
Likes: 0
From: Jacksonville & Ft Laud, FL
STickers, I had to work with a sticker guy. I ended up scanning the calipers with a ruler adjacent as a guide. It took a couple tries until we got it right. I honestly cannot remember who, but I think it was a guy off ebay that was making stickers for something else
Sold to this guy!
Thread
Thread Starter
Forum
Replies
Last Post
