Top 25 1/4 Mile Times For ( TT, ST, SuperCharger, Nitrous, Bolt-ons, Stock )
Originally Posted by diwun67
LOTS of room for improvement there, let's see some times at least .6 secs faster 

My 60' was not that good because of my weaksauce 2200rpm launch and poor clutch slippage. Sucks the track closed last night for the season. I'll be back at the strip when it reopens. Drag racing is fun.
8. CoachK -----------03 Auto -Enth 35 shot------------APS TT 11.302@124.06mph 1.790 60ft DR's
https://my350z.com/forum/drag/322049-coachk-and-pf-getting-faster-and.html
Congrats
Todd
https://my350z.com/forum/drag/322049-coachk-and-pf-getting-faster-and.html
Congrats
Todd
Here is my time slip for last night. I am 8865, the right lane.

Temp 59
Dew 54
pres 1022.8(mb)
Density Altitude Calculation = -122.5
Density Altitude Calculation -37.3
I have 350z Touring and I am running a Turbonetics single, with stock motor, 6MT. I was running BF Goodrich drag radials.

Temp 59
Dew 54
pres 1022.8(mb)
Density Altitude Calculation = -122.5
Density Altitude Calculation -37.3
I have 350z Touring and I am running a Turbonetics single, with stock motor, 6MT. I was running BF Goodrich drag radials.
Last edited by nosurf2day; Dec 20, 2007 at 08:41 AM.
Updated the top 30 list with
25. nosurf2day ------03 6spd -Tour --------------------TN ST 12.255@112.91mph 2.002 60ft DRs
Bumped off
31. Diwun67 ---------05 6spd -Enth --------------------TN ST 12.361@112.71mph 1.843 60ft DR's
Also updated the ST list with
6. nosurf2day -04 Tour 6spd -------------------- TN ST 12.255@112.91mph 2.002 60ft Verified DRs
25. nosurf2day ------03 6spd -Tour --------------------TN ST 12.255@112.91mph 2.002 60ft DRs
Bumped off
31. Diwun67 ---------05 6spd -Enth --------------------TN ST 12.361@112.71mph 1.843 60ft DR's
Also updated the ST list with
6. nosurf2day -04 Tour 6spd -------------------- TN ST 12.255@112.91mph 2.002 60ft Verified DRs
Was looking through OLD threads and found this-he deserves to be on the list, slip is attached. Whatever happened to that guy? TT set-up, built motor
https://my350z.com/forum/showthread....ight=12+sec+NA
https://my350z.com/forum/showthread....ight=12+sec+NA
Originally Posted by taurran
I'm close to the end of the list too, but still the highest listed street tire time.
I'll be near the top soon enough.
I'll be near the top soon enough.

Originally Posted by MRC Motorsports
thats cause we all know you play "power bottom" 

http://www.urbandictionary.com/defin...&defid=1131015
I'm amazed you even know what that is. Is there something you need to "come out" to the community about?
Originally Posted by diwun67
Dammit I got bumped
I need to get me a set of DR's and nail another 1.5 60ft and NOT miss 2nd gear this time 
I need to get me a set of DR's and nail another 1.5 60ft and NOT miss 2nd gear this time I'll be at Bradenton on Sunday the 13th with JT, AJ, and the PF guys shooting for a 10.70 pass. Just had some work done on the car this weekend at PF. If you can come and run, maybe you can get back on the list.
Originally Posted by coachk
I'll be at Bradenton on Sunday the 13th with JT, AJ, and the PF guys shooting for a 10.70 pass. Just had some work done on the car this weekend at PF. If you can come and run, maybe you can get back on the list.

At least I'm still on the ST list...
Originally Posted by coachk
I'll be at Bradenton on Sunday the 13th with JT, AJ, and the PF guys shooting for a 10.70 pass. Just had some work done on the car this weekend at PF. If you can come and run, maybe you can get back on the list.
I want to break out the new setup and try for 10s when its finished, just a bit concerned about not getting kicked off the track before I make that.
Originally Posted by taurran
Do you have a roll cage?
I want to break out the new setup and try for 10s when its finished, just a bit concerned about not getting kicked off the track before I make that.
I want to break out the new setup and try for 10s when its finished, just a bit concerned about not getting kicked off the track before I make that.
I can tell you you run a 10.99 there saving your info and kicking you out on the spot.!!
Just dont try and circumvent the safety equipment requirement, its there for a reason..To save your life.
Originally Posted by Alberto
Was looking through OLD threads and found this-he deserves to be on the list, slip is attached. Whatever happened to that guy? TT set-up, built motor
https://my350z.com/forum/showthread....ight=12+sec+NA
https://my350z.com/forum/showthread....ight=12+sec+NA
9. 03_ppw350z -------03 6spd Enth ----------Built Greddy TT 11.497@125.23mph 1.759 60ft ET Str
^Updated
26. BawlZTT ---------03 6spd Perf -------------------APS TT 12.510@113.86mph 2.018 60ft DRs
^Bumped off
-----------------------------
31. Priscilla LS1 ---04 6spd -Enth ------------(Built) PE TT 12.357@110.62mph 1.903 60ft Slicks
^ Bumped off the top 30 list
11. 03_ppw350z ------03 6spd -Enth --------(Built) Greddy TT 11.497@125.23mph 1.759 60ft ET Str
^ Added to the top 30 list
^Updated
26. BawlZTT ---------03 6spd Perf -------------------APS TT 12.510@113.86mph 2.018 60ft DRs
^Bumped off
-----------------------------
31. Priscilla LS1 ---04 6spd -Enth ------------(Built) PE TT 12.357@110.62mph 1.903 60ft Slicks
^ Bumped off the top 30 list
11. 03_ppw350z ------03 6spd -Enth --------(Built) Greddy TT 11.497@125.23mph 1.759 60ft ET Str
^ Added to the top 30 list
Last edited by 3hree5ive0ero; Jan 3, 2008 at 02:59 PM.




