Advice on KJR pulley damage...need your input!!
12-01-2005, 06:51 AM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: los angeles area
Posts: 1,128
Likes: 0
Received 0 Likes
on
0 Posts
Advice on KJR pulley damage...need your input!!
there is a KJR pulley i am thinking of installing but it has a groove of some sort and i was wondering if it is still okay to install or if it will have any long term effects...
12-01-2005, 07:23 AM
#3
Hard to tell from the pics. As long as its not a deep groove just a surface groove of where the belt prolly was most likely its fine. If your worried about it being out of balance take it to a local machine/balance shop and have it balanced for like $20.
12-01-2005, 10:08 AM
#7
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: los angeles area
Posts: 1,128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Alberto
Ok I see the groove but is it deep or is it a surface scratch?
it doesn't appear to be deep...
Trending Topics
12-01-2005, 01:30 PM
#11
Premier Member
iTrader: (10)
Join Date: Apr 2004
Location: Houston and Austin, TX
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
my KJR pulley has those rings around the side, but not that NASTY looking scratch...the guys at KJR tell me that the wear rinds around the side are normal...but i dunno about that scratch...
12-01-2005, 01:45 PM
#13
Hope these are better pics . My shop said they do make a metal sleeves , so the small groove doesnt happen . Some one else has one of these up for sale with the same small grooves in it . There are some other small scratches and knicks in the pulley from install and uninstall with my engine rebuild . But it should have no effect on the balance of the pulley . I also had 4 pics loaded but only 3 show up
Last edited by booger; 12-01-2005 at 01:49 PM.
12-01-2005, 07:08 PM
#16
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: los angeles area
Posts: 1,128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by booger
Hope these are better pics . My shop said they do make a metal sleeves , so the small groove doesnt happen . Some one else has one of these up for sale with the same small grooves in it . There are some other small scratches and knicks in the pulley from install and uninstall with my engine rebuild . But it should have no effect on the balance of the pulley . I also had 4 pics loaded but only 3 show up
12-02-2005, 04:40 AM
#17
Yes took them yesterday .I looked at the pics I sent you . Some of what appears as scratches arent scratches . Besides the small grooves , there is one scratch above that and is about an inch and 1/2 long . What looks like scratches that run up and down arent scratches...but just the pic is bad
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
Colombo
Forced Induction
35
11-09-2020 10:27 AM
