REDYNOED MY CAR.. Iam pissed
#21
Registered User
Thread Starter
iTrader: (6)
Join Date: May 2005
Location: King of Materbation
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97supratt
What mods do you have? My suggestion is to go over your regular maintenance items such as spark plugs and find out why you have a cel being thrown. If test pipes are your problem, there is a 5 dollar fix so you shouldnt worry. If you are misfiring it might be either your plugs are bad, or your coil is bad. Your best bet is to replace the plugs and find out if it misfires again, if it does then check your coils in that specific cylinder. Good luck man.
I already have the NON foulers in the test pipes but its still throwing a cel out.
My mods are:
Nismo Exhaust
Kinetix Test pipes
DC Headers
Nismo Cams
AAM Plenum Spacer
UR Pulleys
JWT intake
Technosquare reflash
#22
Registered User
iTrader: (61)
Originally Posted by lukesnyder
Yah Iam going to pick some plugs up tonight...
I already have the NON foulers in the test pipes but its still throwing a cel out.
My mods are:
Nismo Exhaust
Kinetix Test pipes
DC Headers
Nismo Cams
AAM Plenum Spacer
UR Pulleys
JWT intake
Technosquare reflash
I already have the NON foulers in the test pipes but its still throwing a cel out.
My mods are:
Nismo Exhaust
Kinetix Test pipes
DC Headers
Nismo Cams
AAM Plenum Spacer
UR Pulleys
JWT intake
Technosquare reflash
#23
Registered User
iTrader: (2)
Join Date: Jul 2004
Location: East Coast
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lukesnyder
Yah Iam going to pick some plugs up tonight...
I already have the NON foulers in the test pipes but its still throwing a cel out.
My mods are:
Nismo Exhaust
Kinetix Test pipes
DC Headers
Nismo Cams
AAM Plenum Spacer
UR Pulleys
JWT intake
Technosquare reflash
I already have the NON foulers in the test pipes but its still throwing a cel out.
My mods are:
Nismo Exhaust
Kinetix Test pipes
DC Headers
Nismo Cams
AAM Plenum Spacer
UR Pulleys
JWT intake
Technosquare reflash
What is the exact code being thrown? I would replace the spark plugs just to be safe and make sure they are gapped correctly. Just to get this correct, was your first dyno result (the high one) done before you had your ecu reflashed?
Thanks,
Jermaine~
#24
Registered User
Thread Starter
iTrader: (6)
Join Date: May 2005
Location: King of Materbation
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackTuner
Luke,
What is the exact code being thrown? I would replace the spark plugs just to be safe and make sure they are gapped correctly. Just to get this correct, was your first dyno result (the high one) done before you had your ecu reflashed?
Thanks,
Jermaine~
What is the exact code being thrown? I would replace the spark plugs just to be safe and make sure they are gapped correctly. Just to get this correct, was your first dyno result (the high one) done before you had your ecu reflashed?
Thanks,
Jermaine~
#25
Dr. Wired
iTrader: (2)
Wow this sucks to hear. Subscribing to see what happens after the spark plug replacement.
I thought the Technosquare reflash prevents the ECU from re-learning and re-adjusting??
Doesn't make sense to me why you're back to stock numbers... Except for the #5 cylinder miss fire code and advanced timing code, perhaps this is an indication of a problem with your cams?
Maybe you could mix some 100 octane in and see the result? Maybe the technosquare reflash gave you too advanced timing?
Just throwing some ideas out there, I know I'm not the most experienced guy when it comes to this stuff but I'm trying to help
I thought the Technosquare reflash prevents the ECU from re-learning and re-adjusting??
Doesn't make sense to me why you're back to stock numbers... Except for the #5 cylinder miss fire code and advanced timing code, perhaps this is an indication of a problem with your cams?
Maybe you could mix some 100 octane in and see the result? Maybe the technosquare reflash gave you too advanced timing?
Just throwing some ideas out there, I know I'm not the most experienced guy when it comes to this stuff but I'm trying to help
#26
Registered User
iTrader: (1)
Join Date: Mar 2003
Location: calgary
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lukesnyder
I #5 cylinder miss fire code and the code for the 02 sensors. What is an easy way to see if I have a blown head gasket?? It does blow out light white smoke when I first start the car...
um, yea, I think there's another reason why you're losing power and it isn't because of the ****ty ECU.
#27
Registered User
iTrader: (61)
Originally Posted by 99atlantic
um, yea, I think there's another reason why you're losing power and it isn't because of the ****ty ECU.
#28
Registered User
Thread Starter
iTrader: (6)
Join Date: May 2005
Location: King of Materbation
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97supratt
If your suggesting its his head gasket I suggest you are incorrect. Head gaskets only blow because of two reasons, 1) overheating 2) Too much boost with a weak head gasket. He is N/A so its not boost, and i'm hoping he hasnt over heated. If he replaces the plugs and he still has a misfire, I say its his coil for #5 cylinder. But what do I know.
#29
Registered User
iTrader: (61)
Originally Posted by lukesnyder
But i used to be boosted.. And the car has overheated once before due to air needing to be purged very recently.. I was on the freeway with no shoulder and could not pull over for 1 mile .. If it does end up being an head gasket I will return the car to stock and bring it to the dealer to check it out. Only thing Iam worried about is the erratic idle of the cams giving away the car has some internal mods.
#30
Registered User
Thread Starter
iTrader: (6)
Join Date: May 2005
Location: King of Materbation
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97supratt
What type of cams do you have? Any specs? If it is very mild, you might get away with it. Good luck
#34
Registered User
Thread Starter
iTrader: (6)
Join Date: May 2005
Location: King of Materbation
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Well to update you guys incase this same thing happens to someone else..
I put in the new spark plugs... Moved coil from cylinder 4 to #5. Started it up, reset the ECU. Same code... misfire cylinder #5. So I thought .. maybe an injector is stuck open... I then took off the Cat on the #5 cylinder and found gas just sitting in the cat. So now I have to figure out if this is def. the problem.. Working on it more within the next 15min. Anyone have suggestion to be sure this is the problem?
I put in the new spark plugs... Moved coil from cylinder 4 to #5. Started it up, reset the ECU. Same code... misfire cylinder #5. So I thought .. maybe an injector is stuck open... I then took off the Cat on the #5 cylinder and found gas just sitting in the cat. So now I have to figure out if this is def. the problem.. Working on it more within the next 15min. Anyone have suggestion to be sure this is the problem?
#36
Have you put it on a scope yet? check your HC CO O2 CO2 NOX readings. maybe that will help your diagnosis a bit. its just an idea. or maybe a short somewhere in your injecters causing it to stay open. also if you can check your PWM to check your on and off time. if not then a new injector. once again just an input. hope it helps on your diagnosis. good luck man. now i need to figure out why my car pings!
Thread
Thread Starter
Forum
Replies
Last Post