cams choice
#1
Registered User
Thread Starter
Join Date: Sep 2005
Location: australia
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
cams choice
could i get some input to what would be the best cams to us in a NA engine
JWT or Nismo or ??? i know in past threads its been mentioned that some cams suit FI better and other suit NA better
cheers
luke
JWT or Nismo or ??? i know in past threads its been mentioned that some cams suit FI better and other suit NA better
cheers
luke
Trending Topics
#9
Registered User
iTrader: (1)
Join Date: Sep 2005
Location: Bellevue, NE
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Nismo (0.426 inches on lift, 262 deg dur.) coppied their cams from JWT (0.428inches lift, 260 deg dur.), then tweaked it a bit so it isn't a complete copy. They are virtually the same and get about the same result. I would go for JWT because they are less expensive. Neither are all that great for FI uses, but they will still give you some gains over stock. You'll find turbo cams have more lift, but are less on durration. Since you are in Australia talk to APS <http://www.************************> especailly if you are going with FI. Also, you may want to check out Tomei cams for something a tad more raddical for N/A uses. After all the research I've done on the subject, I have decided to get my cams ground at Scott Performance <http://www.scottperformance.us/>. Good luck!
Last edited by dbmtrx123; 05-15-2006 at 05:58 PM.
#13
Registered User
Join Date: Aug 2003
Location: Melbourne, Australia
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JDMFairlady21
and how might i ask can you do that?
look into tomei or some custom grind.. probably need to get into UTEC or another managemnt system if you're going with an aggressive grind.
look into tomei or some custom grind.. probably need to get into UTEC or another managemnt system if you're going with an aggressive grind.
i didn't Know that UTEC Can Tune cam timing Already
CheerS
yun
#15
Registered User
iTrader: (5)
Join Date: Mar 2006
Location: NJ
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
i have nismo cams and i love em. The lift and dur. from nismo and jwt are almost identical. Its true, jwt is cheaper so go with that. I suggest u check the private classifieds and post a "i need nismo cams" thread. Good luck!
#16
Registered User
Join Date: Sep 2005
Location: Erial, NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JDMFairlady21
and how might i ask can you do that?
look into tomei or some custom grind.. probably need to get into UTEC or another managemnt system if you're going with an aggressive grind.
look into tomei or some custom grind.. probably need to get into UTEC or another managemnt system if you're going with an aggressive grind.
thought that was pretty simple...
#18
Registered User
Join Date: Feb 2005
Location: Virginia
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
If money is not an issue:
TOMEI
http://www.more-japan.com/Tomei-Cams...p-1-c-457.html
but at $800!!! Yikes!!
TOMEI
http://www.more-japan.com/Tomei-Cams...p-1-c-457.html
but at $800!!! Yikes!!