Hello guys....
i'd like to know if someone make camshafts for my rev up engine????
Thanx in advance...

 

Search!

 

To my knowledge they don't make any yet. I have heard of people using just the intake cam from the non rev-up kits. Seems like a lot of work for little gain.

 

not yet.. a certain company is working on blanks now..

the INTAKE cams will work from a 287 HP motor...

NISMO experimented with the 287 HP Intake NISMO R-Tune cams on the Rev-UP... they said they had good results...

 

Ok... thanks guys...
I have to wait the new camshafts for my Z.....
I hope that they'll come out ASAP.....

 

By the time I'm ready to buy cams... they should be out.

 

Ive been waiting a year for some to come out.

 

I am going crazy waiting for mods for the rev up engine.

 

^You shouldn't be. Most of the mods that fit the 287 HP engine, fit the the 300hp one. I.e. Popcharger, plenum spacers, headers, test pipes, etc.

 

evo 9 owners have the same issues I believe, no intake cams have been produced for the MIVEC engine. unlike EVO8, the stock cams produce "perfect" power and drivability as is (words from David Buschur).

I'm understanding it's more or less the same issue with the rev-up engine. My guess is the reason we haven't seen cams yet is because with VTC, the benefit is not as noticeable. (or at least, it's not justifiable).

 

If you have plans to go FI, the rev-up stock camshafts are AWESOME! We are building power all the way to redline with no drop-off in power whatsoever. On the last rev-up motor we did, we acheived about 30whp more at the same boost level, vs. a typical non-rev up motor. Nissan got this one right!