pearlwhite_z

iTrader: (14)

first id like to say i have been spending a lot of time reading on and on about making this much power n/a and it seems like it is virtually impossible. i know rickdogg has like 285 but i was wondering how and why it is so difficult for our cars to make 300 hp....my quest to make it will include the following and please help me out if you have any other/better suggestions.....from what i have been reading, it seems that these mods are the norm: utec, plenum spacer, popcharger, exhaust (nismo), test pipes (resonated to eliminate rasp), crawford headers, ur crank pulley and maybe nismo or jwt cams....am i missing anything else?

undrgnd

iTrader: (2)

Yes, the 437 other threads about making 300WHP NA.

ZON

iTrader: (2)

FLMAO!! That was a good one

GMZ

iTrader: (6)

Haha! The Nismo exhaust sounds the best imo (I had one) but it doesnt give the best gains. If you are serious about this quest than you should be searching for which exhaust+other mods make the most power. Be ready to spend as much as going F/I.....
Edit: With that spacer (1/2" for most power) Id also get an MREV modified lower plenum. That combo will be good for 15-20+ hp

davidv

iTrader: (2)

Hell you are halfway there already!

Netko350Z

iTrader: (8)

APC sticker...good for 10-15whp

Nexx

iTrader: (41)

got you beat. my Type-R sticker is good for 20whp and it has sweeties dropping their panties.

techcontrol

iTrader: (4)

I got you all beat, my MRC Motorsports t-shirt is good for 15 whp and good for 20 after washing

EDIT: Nexx... we both you know you don't have a "Type-R sticker" But your 19" Volks are good for an additional 15lbs

JAMBO

iTrader: (2)

individual throttle bodies
high compression pistons
custom heads ,valve train
are we psat 10,000.00 yet ?
I think so
so screw NANANANANANANA

zz350zz

Swap in a VQ35HR in a couple months and WALA!!

Armitage

iTrader: (15)

We can't do ITB's without getting rid of DBW.


To the OP, you should probably have gotten a Z with a Rev-up motor. Bottom line, they are dynoing higher.

GMZ

iTrader: (6)

I am curious to see what they put out and how they handle mods, if the diff between 287 and revup is any indication it will be sweet for sure!

pearlwhite_z

iTrader: (14)

this is retarded, can i have some useful information? i cant believe people have all this time to post crap like this....ive searched and did NOT find 400+ posts about 300hp n/a....anyways if you have nothing useful to stay please STAY OUT!

GMZ

iTrader: (6)

Check my first post. This will not encourage others to help..........

kourosH

iTrader: (3)

if you get the spacer 5/16 also get MREV2

ct350z

iTrader: (6)

good luck homie, but to see over 290 is a miracle...lol...unless you go internal then you might see these numbers. have fun!!!

kevinbonds

Honestly its not really possible.. Everyone has tried. If you want to spend more then FI to get there maybe. I talk to a ton of people who have spent thousands on ma mods only to spend the money a second time on FI cause they are not happy with the results.In fact with the right amount of money (god knows how much)you can get more then 300, but honestly whats the point.. I see a ton of people posting that they have done this NA bolt on mod/utec this and that and still dyno 245-250-260 thats about it. Now in my opinion spending all the money on cams and all that stuff doenst justify the cost for the HP you gain. Honestly you are better off putting the money into supporting mods so that you can go FI down the road..

superchargedg

iTrader: (4)

your probably not going to get there without a ton of money.but i have 2 and i say 2 aem stickers that i promise will give you at least 30whp.

undrgnd

iTrader: (2)

Okay, here you go. That's going back only 6 months. You're not the first one that sucks at searching. A lot of good info here. Enjoy!

https://my350z.com/forum/showthread....ight=300+hp+na
https://my350z.com/forum/showthread....ight=300+hp+na
https://my350z.com/forum/showthread.php?t=198778&highlight=300+whp]
https://my350z.com/forum/showthread....hlight=300+whp
.

zz350zz

I was serious about that HR swap..... if the numbers are good when it comes out I will probably do it