How hot is the engine bay?
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: Texas
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
How hot is the engine bay?
Do any of you know how hot an engine bay can get? Particularly around the intake? What temperature? I put some dynamat (rated at 350F, 175C) on the pop charger's heat shield to improve its purpose. It works by the way. But i'm afraid the dynamat might not be rated high enough to withstand the engine bay temps. Can anyone advise? I live in Texas where it's HOT!
Thanks,
Thanks,
#4
Registered User
iTrader: (1)
Join Date: Jul 2006
Location: Greenville SC
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
Kind of on the topic of heat, and kinda not directly on this topic. Bu I will ask anyway, has anyone ever louvered there hood. It was real big way back in the day with hot rods and was just wondering is anyone has ever seen a z with hood louvers.
Cheers
Kevin
Cheers
Kevin
#5
Registered User
Thread Starter
Join Date: Dec 2005
Location: Texas
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Shift_Z33
I doubt it will hurt anything, although I doubt it would help either.
Trending Topics
#13
Registered User
Join Date: Oct 2003
Location: Marietta, Georgia
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Radio Shack has inexpensive outside [15-20'] wired digital temp gauges, great to mount sensor underhood or in air path to see the horrible performance of most cone filters even with INSULATION...........especially compared to oem system.
All that counts is inside plenum temperature.
The MAF assembly has an IAT sensor that can be read from OBD2 scanner/data monitor.
For every 11F temp rise the density and power output drops by 1%.
Consider in summer that the rad raises temp by 20-30F and AC condenser by the same amount........not unusal to see 160F air flowing into a cone.
All that counts is inside plenum temperature.
The MAF assembly has an IAT sensor that can be read from OBD2 scanner/data monitor.
For every 11F temp rise the density and power output drops by 1%.
Consider in summer that the rad raises temp by 20-30F and AC condenser by the same amount........not unusal to see 160F air flowing into a cone.
#15
Dr. Wired
iTrader: (2)
Your car gets the hottest when it's idling.
When you're driving around, the engine bay is only slightly hotter than ambient temperature.
Get a meat thermometer ($5, grocery store) and zip-tie it somewhere inside your engine bay. Then let it idle for like 10 minutes, and check the temp.
When you're driving around, the engine bay is only slightly hotter than ambient temperature.
Get a meat thermometer ($5, grocery store) and zip-tie it somewhere inside your engine bay. Then let it idle for like 10 minutes, and check the temp.
#18
My engine gets so hot that i have to open the hood after i drive it. And when i come back into the garage after 1/2 hr. it's like an oven. (could possibly be the blower) but i know it gets HOT.
#20
Registered User
iTrader: (5)
Join Date: Dec 2005
Location: N.VA
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jun
How does dynamat improve the purpose of the heatshield? Does it keep it cool or something? I thought it was just sound-deadening material.
I think it is being used to close off the gaps in the back. That makes sense anyway.