Notices
Engine & Drivetrain VQ Power and Delivery

Mph W/ Technosquare Ecu

Thread Tools
 
Search this Thread
 
Old Jul 11, 2003 | 05:17 AM
  #1  
Rxramon's Avatar
Rxramon
Thread Starter
Charter Member #45
 
Joined: May 2002
Posts: 578
Likes: 0
From: Austin, TX
Default Mph W/ Technosquare Ecu

So how fast will this new ECU let you go?

Maybe some of you with the beta can answer...
Reply
Old Jul 11, 2003 | 05:52 AM
  #2  
Zaphod 350z's Avatar
Zaphod 350z
Registered User
 
Joined: Nov 2002
Posts: 398
Likes: 0
From: NYC
Default

Faster than 154mph. Beyond that, top speed will be based on your mods (power) and gearing. I would speculate in it's stock form 170 - 175mph is on par.
Reply
Old Jul 11, 2003 | 10:46 AM
  #3  
D_Nyholm's Avatar
D_Nyholm
Registered User
 
Joined: Mar 2003
Posts: 532
Likes: 0
From: Long Island, NY
Default

YOu really think 175?!?! I would guess more along the lines of 160 or so. When you start going that fast, it takes LOTS of power to get up more and more. My cousins Ferrari 348 Spyder only went 178 with the top up and 145 with the top down. That car is relatively aerodynamic and also has 320 HP. A lot more than the Z does!!
Reply
Old Jul 11, 2003 | 10:49 AM
  #4  
jcr847's Avatar
jcr847
New Member
iTrader: (1)
 
Joined: May 2003
Posts: 765
Likes: 0
From: DC
Default

the z is drag limited at 179 it wont make it there in stock form though. my guess would be in the 165 range
Reply
Old Jul 11, 2003 | 10:59 AM
  #5  
nonmature's Avatar
nonmature
Registered User
 
Joined: Feb 2003
Posts: 165
Likes: 0
From: OC
Default

Originally posted by Zaphod 350z
Faster than 154mph. Beyond that, top speed will be based on your mods (power) and gearing. I would speculate in it's stock form 170 - 175mph is on par.
I'll go with zaphod on this one I say right about 170 but I'll do you all one better... maybe I'll try it... hehehe

SPEED FREAKSSSS!!!!!

-non
Reply
Old Jul 11, 2003 | 01:10 PM
  #6  
Zaphod 350z's Avatar
Zaphod 350z
Registered User
 
Joined: Nov 2002
Posts: 398
Likes: 0
From: NYC
Default

I think it could do 170. I had my audi S4 up at 174 with a chip and exhaust.
Reply
Old Jul 11, 2003 | 01:37 PM
  #7  
Mikestro's Avatar
Mikestro
Registered User
 
Joined: Jun 2003
Posts: 2,560
Likes: 0
From: San Diego, CA
Default

What is the formula for calculating the drag limit of a vehicle?
Reply
Old Jul 11, 2003 | 01:48 PM
  #8  
jcr847's Avatar
jcr847
New Member
iTrader: (1)
 
Joined: May 2003
Posts: 765
Likes: 0
From: DC
Default

i have no idea. thats the number car and driver came up with
Reply
Old Jul 12, 2003 | 07:51 PM
  #9  
Rxramon's Avatar
Rxramon
Thread Starter
Charter Member #45
 
Joined: May 2002
Posts: 578
Likes: 0
From: Austin, TX
Default

Personally , Im thinking 180+ with intake, pullys, exhaust, and headers... minus the MPH limiter.

I did the 156 in the Z already and I was only half way through 5th gear........

I guess investing in the chip will come before turbos.
Reply
Old Jul 12, 2003 | 11:49 PM
  #10  
Apexi350z's Avatar
Apexi350z
Charter Member #50
iTrader: (3)
 
Joined: May 2002
Posts: 3,552
Likes: 0
From: Houston, Texas
Default

my guess would be 170mph.. it's probably drag limited, but not gear limited..

with the stock hp, maybe it would take some time to get there too.... but imo, too dangerous to try the top speed... be very very careful if you do..
Reply
Old Jul 13, 2003 | 09:10 AM
  #11  
zoasis's Avatar
zoasis
Registered User
 
Joined: Apr 2003
Posts: 315
Likes: 1
From: Blue Springs, MO
Default

Originally posted by Apexi350z
my guess would be 170mph.. it's probably drag limited, but not gear limited..

with the stock hp, maybe it would take some time to get there too.... but imo, too dangerous to try the top speed... be very very careful if you do..
Uh, I don't think there is any way to do 170 careful. Unless your in Utah on the salt flats!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
350NISMO
Engine & Drivetrain
27
Apr 4, 2006 12:30 PM
zillinois
Engine & Drivetrain
66
Feb 14, 2005 02:43 PM
Alberto
Engine & Drivetrain
7
Aug 21, 2004 05:56 PM
zillinois
2003-2009 Nissan 350Z
25
Jun 21, 2004 06:32 PM
mcduck
Engine & Drivetrain
137
Jan 18, 2004 08:22 AM




All times are GMT -8. The time now is 08:01 AM.