If any of you guys know, what are these SC's putting out hp wise? Also what do they cost? There is a thread going on at another forum about a Procharged 350Z putting down 410RWHP that raced a cammed SS and put a hurting on him pretty good, and I figured you guys might know if that is correct.

 

I think it is around 350-360ish rwhp.

 

Gotta wonder why this "350Z" guy isn't posting such a feat on the largest 350Z board on the Internet... 410RWHP that is a sh*tload of power.... it would be easier to conceive the negation of the "rear wheel horsepower" part...

 

Thats what I was wondering also. I reread that post and it said he also had headers. Even a 350-360 rwhp should pull on a 370rwhp SS I believe because of weight though.

 

410whp is possible if you change the pulley to a higher psi.. the 7psi pulley they give you in the complete kit is capable of about 370whp. If you purchase the tuner kit, they can supply you with the pulley of your choice.

 

would I be causing trouble by posting the link to the forum with the thread in question?....naaaaaah

http://www.ls1.com/forums/showthread...hreadid=355942

 

I was counting down the seconds until u did somebody *cough cough "Vice" LS1.com resident 350 owner did*
How much are these systems? My friend (CLS on this board) said they were around $6,000 but maybe I misunderstood him.

 

hahahah...are you for real..were you really waiting to see my name in this thread with an ls1.com link?...lol.

Not sure about the "procharger" but I've read the SC out there costs between 4000-5500 just for the parts..then you gotta add labor costs.

 

Yeah, ur the one I see whenver a 350 post comes up on LS1.com. Your name just rings a bell.

 

Haha I rang your moms bell. I think they are putting around 360 to the wheels J. But, I know I can put a hurtin on lightly modded LS1's with my stock 350. And the LS1 even had drag radials. Who needs a supercharger?

 

HA HA yes, u got me out the hole cause I didnt launch worth a **** , but who came flyin by in third gear??
Try me now after I got some practice on them DR's

 

The Procharger runs roughly 5K plus another 600-800 for install.

There is a 9 PSI pulley in the works and ATI is testing it, but no one out in the street has it yet.

The Procharger puts out about 360 RWHP on the 350Z.

Trust me, I know......or at least, I soon will.

 

!

 

Is someone else getting their Z done up too Bonz?

I see a reflection of a DB in your first pic

 

$5K=50%HP gain

 

Thats mikes from the tuner shop

 

Yep, it's already "Procharged".

 

bonz.. you gotta remove "someday" from your sig, isn't it already getting installed?

 

Someday, will remain someday, until it becomes the day I pick up the car and put the pedal down to the floor for the first time.