Time to replace clutch/fly???help..
10-21-2008, 05:43 PM
#1
Booooosstt!!
Thread Starter
iTrader: (58)
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes
on
0 Posts
Time to replace clutch/fly???help..
Starting today, my car has been acting weird...you can hear it in the video. it started making rattling/breaking sound under the car. I'm assuming that it's coming from the clutch/flywheels.
- when car is stopped, i can hear it a little bit
- when i put it in first gear, and let the clutch go slowly, i don't hear it very loud. ( without pushin accelerator )
- when i let my clutch go and push the accelerator, it starts making a loud noise...
please help guys....is it time to replace my clutch/flywheels? or something else?
* Uploading video *
Edit: somehow i can not upload the video here, so here is link!!!
http://vids.myspace.com/index.cfm?fu...deoid=45051683
- when car is stopped, i can hear it a little bit
- when i put it in first gear, and let the clutch go slowly, i don't hear it very loud. ( without pushin accelerator )
- when i let my clutch go and push the accelerator, it starts making a loud noise...
please help guys....is it time to replace my clutch/flywheels? or something else?
* Uploading video *
Edit: somehow i can not upload the video here, so here is link!!!
http://vids.myspace.com/index.cfm?fu...deoid=45051683
Last edited by Chef-J; 10-21-2008 at 06:22 PM.
10-21-2008, 06:22 PM
#2
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
throw out bearing....common issue, but its only going to get worse and you run the risk of damaging the bearing altogether (not good!)
you can change just the bearing, transmission has to come out though - good time to upgrade the clutch and flywheel though if your budget allows for it
you can change just the bearing, transmission has to come out though - good time to upgrade the clutch and flywheel though if your budget allows for it
10-21-2008, 06:41 PM
#4
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
actually just re-read your description
with the car running, does the noise change when you push the clutch pedal in vs let it out (car does not have to be in gear, just running)?
with the car running, does the noise change when you push the clutch pedal in vs let it out (car does not have to be in gear, just running)?
10-21-2008, 06:48 PM
#5
Booooosstt!!
Thread Starter
iTrader: (58)
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes
on
0 Posts
even not in gear, i hear very little bit, i couldn't even catch from camera. But when it is in gear and press gas, ( when i let the clutch slowly) it gets really loud...But i can pretty much tell it's from clutch/flywheel..because i drove it really hard after installed the exhaust system..( damm ur HFC 
)
)
Trending Topics
10-22-2008, 09:39 AM
#8
Booooosstt!!
Thread Starter
iTrader: (58)
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes
on
0 Posts
One more question, if not replace throw out bearing and just driving for 2~3 weeks. what worst scenario can happen? I don't know, if it will be ok to do after winter.
As request PM:
Just tapping gas pedal ( without clutch in) it making a noise under 1500k rpms also.
As request PM:
Just tapping gas pedal ( without clutch in) it making a noise under 1500k rpms also.
Thread
Thread Starter
Forum
Replies
Last Post
