Oil leak problems
11-04-2008, 05:24 PM
#23
Sponsor
Z1 Motorsports
Z1 Motorsports
iTrader: (4)
Join Date: Apr 2007
Location: Peachtree City
Posts: 1,194
Likes: 0
Received 0 Likes
on
0 Posts
honestly... i cant remember for NA id say 190 to 200ish. It will be pretty high the ratio is around 11 to 1
Last edited by Jarred@Z1; 11-04-2008 at 05:26 PM.
11-04-2008, 05:26 PM
#24
Registered User
Thread Starter
Join Date: Sep 2008
Location: Eagle Pass Texas
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
11-04-2008, 05:33 PM
#27
Registered User
Thread Starter
Join Date: Sep 2008
Location: Eagle Pass Texas
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
11-04-2008, 05:41 PM
#29
Registered User
Thread Starter
Join Date: Sep 2008
Location: Eagle Pass Texas
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
MY car is a double edge sward because pretty much what ever I spend on the car I have to spend on my wife. For instance I got the 350Z and now she wants a used H2. What can I say happy wife happy life.
Last edited by LSX-PWR; 11-04-2008 at 05:44 PM.
11-05-2008, 01:38 PM
#32
Registered User
Thread Starter
Join Date: Sep 2008
Location: Eagle Pass Texas
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
This is the part # the dealer gave me on the O-ring B1304-43400. Oh by the way I have to take the Z to the dealer ship for the recall on the fuel lines.
11-12-2008, 09:19 AM
#35
Registered User
Thread Starter
Join Date: Sep 2008
Location: Eagle Pass Texas
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
The O-ring was just worn out. No big deal. All though the spark plug were worn the hell out. They were NGK but the electros were burn out and the cap was at .86. I know wow.
I will be doing a few little mods to the car like for a example a catch can, machining the lower plenum and porting the bottom of the intake. Plus I was thinking of putting in a 5/16 spacer as well. I know that I am going to put in a LS7 engine later on down the road but for now things like this will do.
I will be doing a few little mods to the car like for a example a catch can, machining the lower plenum and porting the bottom of the intake. Plus I was thinking of putting in a 5/16 spacer as well. I know that I am going to put in a LS7 engine later on down the road but for now things like this will do.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
