ae86 with a VQ with problems...
12-19-2009, 08:34 AM
#1
Registered User
Thread Starter
Join Date: Sep 2009
Location: sfl
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
ae86 with a VQ with problems...
Hey guys I just got the motor to start and it goes into
limp mode for no aparant reason. Scanned for codes and
it gets a 1610 NATS code and a 1001 CAN COM code.
I spoke to my tuner and he said that it should show those
because Im only running the engine harness and nothing else.
Anyone have any ideas?? Because Im so stumped on this one.
03 motor and ecu flashed for NATS removal by UpRev
Thanks
Heres a video BTW
http://www.youtube.com/watch?v=Z6nc8FODr_Q
limp mode for no aparant reason. Scanned for codes and
it gets a 1610 NATS code and a 1001 CAN COM code.
I spoke to my tuner and he said that it should show those
because Im only running the engine harness and nothing else.
Anyone have any ideas?? Because Im so stumped on this one.
03 motor and ecu flashed for NATS removal by UpRev
Thanks
Heres a video BTW
http://www.youtube.com/watch?v=Z6nc8FODr_Q
12-25-2009, 07:17 AM
#6
Registered User
Thread Starter
Join Date: Sep 2009
Location: sfl
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
well the ECU has been dumbed down by uprev, my problem is weird now the
throttle body is working like 2% of the time.
whenever I turn the key to on the throttle body just clicks like a relay sound
and once in a blue moon it starts to have that high pitch wine like its supposed
too.
now is it supposed to work with the key just on the on without starting the
motor???
PS merry christmas!!
throttle body is working like 2% of the time.
whenever I turn the key to on the throttle body just clicks like a relay sound
and once in a blue moon it starts to have that high pitch wine like its supposed
too.
now is it supposed to work with the key just on the on without starting the
motor???
PS merry christmas!!
Last edited by alx954; 12-25-2009 at 07:25 AM.
Trending Topics
12-27-2009, 08:38 PM
#8
You may try doing a throttle relearn on it for the TPS. I know from research that if you mess with the throttle blade with the engine off it will screw with it. Also you could try replacing the the TPS, and the throttle body just to check it. Call uprev or email jared they are always willing to awnser my questions.
Hey Jay'Z way to go to ruin another thread with your mindless babbling. Seems like that is all you do, have to get your post count up.
Hey Jay'Z way to go to ruin another thread with your mindless babbling. Seems like that is all you do, have to get your post count up.
01-02-2010, 06:48 AM
#10
Registered User
iTrader: (2)
Join Date: Apr 2009
Location: PA
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
You may try doing a throttle relearn on it for the TPS. I know from research that if you mess with the throttle blade with the engine off it will screw with it. Also you could try replacing the the TPS, and the throttle body just to check it. Call uprev or email jared they are always willing to awnser my questions.
Hey Jay'Z way to go to ruin another thread with your mindless babbling. Seems like that is all you do, have to get your post count up.
Hey Jay'Z way to go to ruin another thread with your mindless babbling. Seems like that is all you do, have to get your post count up.
Thread
Thread Starter
Forum
Replies
Last Post
