Nismo LSD now installed
#41
Registered User
Join Date: Jun 2003
Location: Houston, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Jeff,
Sorry to bring up this old post, but I thought it would be useful to have this answered for anyone else that might run into this.
I just had the Nismo LSD installed in my G35 Sedan and they left it at the factory setting of 80%. It's a bit harsh on the slow turns (especially getting out of my driveway) and I also want to get mine down to 60%. From what I understand, the original instructions are in Japanese and I believe Jason is working on getting an answer on how to make the adjustment. If you guys could coordinate to get the answer posted here, that would be greatly appreciated.
Thanks in advance,
Don
Sorry to bring up this old post, but I thought it would be useful to have this answered for anyone else that might run into this.
I just had the Nismo LSD installed in my G35 Sedan and they left it at the factory setting of 80%. It's a bit harsh on the slow turns (especially getting out of my driveway) and I also want to get mine down to 60%. From what I understand, the original instructions are in Japanese and I believe Jason is working on getting an answer on how to make the adjustment. If you guys could coordinate to get the answer posted here, that would be greatly appreciated.
Thanks in advance,
Don
#42
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by G35_AutoX
Jeff,
Sorry to bring up this old post, but I thought it would be useful to have this answered for anyone else that might run into this.
I just had the Nismo LSD installed in my G35 Sedan and they left it at the factory setting of 80%. It's a bit harsh on the slow turns (especially getting out of my driveway) and I also want to get mine down to 60%. From what I understand, the original instructions are in Japanese and I believe Jason is working on getting an answer on how to make the adjustment. If you guys could coordinate to get the answer posted here, that would be greatly appreciated.
Thanks in advance,
Don
Jeff,
Sorry to bring up this old post, but I thought it would be useful to have this answered for anyone else that might run into this.
I just had the Nismo LSD installed in my G35 Sedan and they left it at the factory setting of 80%. It's a bit harsh on the slow turns (especially getting out of my driveway) and I also want to get mine down to 60%. From what I understand, the original instructions are in Japanese and I believe Jason is working on getting an answer on how to make the adjustment. If you guys could coordinate to get the answer posted here, that would be greatly appreciated.
Thanks in advance,
Don
I was under the impression that Jeff had Rocky (one of the mechanics there at Perf nissan) adjust his back to 60% or 70%. I am prettysure that Jeff's not running at 80% and he reported a lot of imrovement at 60%.
Gurgen
#43
Registered User
Join Date: Jun 2003
Location: Houston, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Thanks Gurgen,
I had read that post from Jeff as well which is why I posed the question to him.
Jason and Jeff are looking to have this answered for us soon.
Thanks
I had read that post from Jeff as well which is why I posed the question to him.
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
Jason and Jeff are looking to have this answered for us soon.
Thanks
#45
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
All depends what you are using the car for....for street, yes, 60% is best, for track use (especially longer tracks with higher speeds), for high speed use, 80% or more is ideal.
#46
Registered User
Join Date: Jun 2003
Location: Houston, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by Z1 Performance
All depends what you are using the car for....for street, yes, 60% is best, for track use (especially longer tracks with higher speeds), for high speed use, 80% or more is ideal.
All depends what you are using the car for....for street, yes, 60% is best, for track use (especially longer tracks with higher speeds), for high speed use, 80% or more is ideal.
It looks like it comes from the factory at the medium setting (which I think is 80% lockup). Basically, it looks like you can lift the car, remove the right axle flange and go in with some kind of socket for the adjustment (to either high-100% or low-60%.
First unknown factor is whether it's a regular socket or a special tool.
Another unknown is the direction to turn it and how much. If we can figure this out, we're all set. Anyone have a spare manual around? Mine has gone missing.
#47
Registered User
Join Date: Apr 2003
Location: Eastern PA
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Anyone using the 60 percent setting with VDC? I don't track my Z often, but I'd love this upgrade. I just don't want to be forced to turn VDC off every time I'm driving around town.
#48
Sponsor
Performance Nissan
Performance Nissan
Thread Starter
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Sorry for the delay. Rocky has been off and won't be back until Tuesday. No one at Nissan/Motorsports seems to be able to answer this for me. If anyone else know please answer!!
#49
#50
Registered User
Join Date: Jun 2003
Location: Houston, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally posted by Z1 Performance
I cannot fathom how on earth its adjustable without disassembling the diff......I have done it on the Cusco's before, but not on the NISMO, as we have yet to use it
I cannot fathom how on earth its adjustable without disassembling the diff......I have done it on the Cusco's before, but not on the NISMO, as we have yet to use it
Like I said before, you can lift the car, remove the right axle flange and go in with some kind of socket for the adjustment (to either high-100% or low-60%. Now I figured this out by half-*** translating this page (Nismo LSD ) but mostly from the image on this page. See below:
![](http://www.nismo.co.jp/products/lsd/image/lsdpro_06.jpg)
Now here are the specifics from Ed which he got from the Nismo LSD manual (mine mysteriously disappeared by the way):
"The initial torque reference values are as follows:
Low: 50.6 ftlbs
Mid: 68.7
High: 101.0
It uses a 19mm box wrench.
Max force is 72ftlb to the box wrench when adjusting, or it may damage the unit. And you are not to go beyond the high or low settings. Caution note against damaging the oil seal with the serration part of the shaft. You turn the box wrench 90 degrees clockwise to set it from mid to high, and you turn it 90 degrees counterclockwise to set it to low from mid"
Thanks to everyone that helped here and I hope this helps those that choose this awesome mod.
Don
Last edited by G35_AutoX; 01-24-2004 at 07:07 AM.
#53
Registered User
Join Date: Oct 2003
Location: North Jersey
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Gsedan35
Trust me, yes it will.
The Z and both G's are the same part for part on the drivelines, non LSD's are the same and LSD are the same. Only difference's are a function of the different wheelbase, their the Z get's the trick drive shaft.
The Z and both G's are the same part for part on the drivelines, non LSD's are the same and LSD are the same. Only difference's are a function of the different wheelbase, their the Z get's the trick drive shaft.
#54
Turbo Whore
![](https://my350z.com/forum/images/ranks/premier.gif)
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Lucino
what did you mean by "the trick drive shaft" ???
#55
Registered User
Join Date: Oct 2003
Location: North Jersey
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
oh...lucky Z guys. Wonder if it's a direct swap with the G35, my guess it should be.
So what other suspension components are different besides the drive shaft? Don't the transmissions in the Z's have closer ratio?
So what other suspension components are different besides the drive shaft? Don't the transmissions in the Z's have closer ratio?
#56
Turbo Whore
![](https://my350z.com/forum/images/ranks/premier.gif)
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Lucino
oh...lucky Z guys. Wonder if it's a direct swap with the G35, my guess it should be.
So what other suspension components are different besides the drive shaft? Don't the transmissions in the Z's have closer ratio?
So what other suspension components are different besides the drive shaft? Don't the transmissions in the Z's have closer ratio?
no direct swap...wheelbase on the G35s is longer so their driveshaft is longer...same exact trasmissions though....
#58
New Member
iTrader: (1)
Join Date: Jun 2008
Location: wichita,ks
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
ok guys just installed my nismo lsd i love it but the sad thing is i got it used from z1auto.com which is ok but didn't come with instructions so i don't know what setting it was on 1.5 or 2.0, and i don't know what the lockup was if it was 60 80 or 100% I was driving with it last night and well jerks a little when i make turns would that mean its set on 2 way or is that normal and is it suppose to be that loud when its cold cuz it sounds like alot of metal grinding on the straight away its amazing especially with the spl aluminum bushings
Thread
Thread Starter
Forum
Replies
Last Post
Extreme Dimensions
Southern California
0
09-24-2015 03:35 PM