Project 600zilla - LS2+T56 350z swap

Reply Subscribe

Thread Tools

Search this Thread

Dec 6, 2011 | 06:46 PM

#21

makdaddynuge

Registered User

iTrader: (1)

Joined: Jun 2011

Posts: 52

Likes: 0

From: Louisiana

where can i find information about this fueled racing kit? I went to their website but only found information on the 240sx kits.

Dec 6, 2011 | 07:36 PM

#22

Langdonious Rex

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2011

Posts: 104

Likes: 0

From: Las Vegas, NV

Quote:

Originally Posted by bbs350z

in for another swap monster! hell yeash! check the other buiuld threads, theirs tons of info on what had to be done even after you get the swap kit. its really not all that much, but enough to make you wanna do it right the first time around

Yours and the other build threads will continue to be sources of information and inspiration. Can't wait to git r done.

Quote:

Originally Posted by makdaddynuge

where can i find information about this fueled racing kit? I went to their website but only found information on the 240sx kits.

The S13 and S14 kits are the same as the 350z kits, except that they are made to fit the 350z. Your best bet is to call the shop and talk to Todd. He is extremely helpful and knowledgable!

Dec 6, 2011 | 08:15 PM

#23

Jagot

Registered User

Joined: Jul 2011

Posts: 5

Likes: 0

From: Sydney, Australia

In for the Fueled Racing kit! Lots of photos please

Dec 7, 2011 | 08:31 AM

#24

CRIDDA

Registered User

iTrader: (10)

Joined: Oct 2006

Posts: 5,649

Likes: 2

From: A-TOWN

In for another one

Dec 7, 2011 | 08:56 AM

#25

Vivid Racing

Sponsor
Vivid Racing

iTrader: (67)

Joined: Dec 2002

Posts: 4,078

Likes: 0

From: Gilbert,AZ

Quote:

Originally Posted by Langdonious Rex

Thanks. I will hit you up soon. I need wiring services.

DG-5 coilovers. You're right. Coilovers up front, OEM style rear.

That was in San Fernando Valley, CA. I made a deal for a CF 07-08 hood and CF hatch and did the swap at the seller's house. I live in Vegas but I'm between Vegas and Tucson, AZ a lot.

I ordered my kit through Todd @ Fueled about 2 months ago. I agree it's the best designed swap kit out there but it's but nothing but delays. It has lead to some of my frustration but I'm exercising as much patience as I can. I'm giving him the benefit of the doubt at this point so until then I'm just waiting. I really hope the wait is worth it. I got the full kit plus the fuel and clutch kits.

Quote:

Originally Posted by Langdonious Rex

Spoke to Todd @ Fueled Racing. There was a bit of a shipping SNAFU but all is sorted. The bulk of the kit should arrive this week. Headers are still another week or 2 out.

I'm glad you got a hold of Todd. I've known him for a little over 2 yrs now and he's a good guy. He'll do his best to make sure everything is sorted out ASAP.

Quote:

Originally Posted by makdaddynuge

where can i find information about this fueled racing kit? I went to their website but only found information on the 240sx kits.

The Z33 kits have been in testing for over a year on a few cars but he just recently made them available for sale. I'm sure he'll get the website updated when he has some time.

Dec 7, 2011 | 03:42 PM

#26

travismaser

Registered User

iTrader: (8)

Joined: Oct 2007

Posts: 1,036

Likes: 1

From: Coraopolis, Pa

you have my attention on this one

Dec 8, 2011 | 06:17 AM

#27

Brew_haha

Registered User

Joined: Feb 2010

Posts: 290

Likes: 0

From: alabama

And their headers

Dec 8, 2011 | 12:09 PM

#28

Langdonious Rex

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2011

Posts: 104

Likes: 0

From: Las Vegas, NV

Most of the swap kit arrived. Quailty is top notch. Can't wait to bolt this stuff together!

Dec 8, 2011 | 12:11 PM

#29

bbs350z

Registered User

iTrader: (85)

Joined: Sep 2006

Posts: 6,662

Likes: 2

From: Scottsdale AZ

^whats the price of the basic swap kit?

Dec 8, 2011 | 12:38 PM

#30

Langdonious Rex

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2011

Posts: 104

Likes: 0

From: Las Vegas, NV

Don't know. I bought the complete kit which is everything in the 2 pics Brew posted. I also bought the aluminum driveshaft upgrade (which is extra), the fuel kit, and the clutch kit. He also has an A/C line service. I will be sending him my GTO and Nissan lines and they will be spliced together to fit the swap. There is no way in hell I'm running without A/C in Vegas. It would be suicide.

Dec 8, 2011 | 10:36 PM

#31

bbs350z

Registered User

iTrader: (85)

Joined: Sep 2006

Posts: 6,662

Likes: 2

From: Scottsdale AZ

^pm me or brew_haha about harness's. logan works for chasebays which makes badass harness kits and my buddy owns QFab motorsports and custom built my harness as well as vasz33's

Dec 8, 2011 | 11:30 PM

#32

ducky

Registered User

iTrader: (2)

Joined: Jul 2002

Posts: 220

Likes: 0

From: Las Vegas

Looking good!!! Glad to see another local doing a LS swap...well your well ahead of me!!! I am also going through Todd for my setup.

Anyhow I'm def keeping an eye on your thread. I bet you're excited to get this done...

Dec 9, 2011 | 03:31 AM

#33

Cass007

350Z-holic

iTrader: (34)

Joined: Apr 2008

Posts: 5,419

Likes: 2

From: In teh Mid-A

Quote:

Originally Posted by Langdonious Rex

Most of the swap kit arrived. Quailty is top notch. Can't wait to bolt this stuff together!

The mount hole looks too small for the bolt on the steering rack. Does the mount sit on top of the stock VQ mount? It looks like it does.

Dec 9, 2011 | 06:13 AM

#34

Brew_haha

Registered User

Joined: Feb 2010

Posts: 290

Likes: 0

From: alabama

Price on the basic kit is $1,850.00 +shipping

Dec 9, 2011 | 06:35 AM

#35

Z33Garage

New Member

iTrader: (3)

Joined: Jun 2011

Posts: 2,755

Likes: 26

From: Orlando

Melt the rims

Forge into shift *****

Sell to ricers(honda forums)

??????

Profit = Volk Rims

Dec 9, 2011 | 09:42 AM

#36

bbs350z

Registered User

iTrader: (85)

Joined: Sep 2006

Posts: 6,662

Likes: 2

From: Scottsdale AZ

check your hydraulic lines and make sure the restrictor is minimum 1/8th inch before you install!

Dec 9, 2011 | 10:32 AM

#37

Langdonious Rex

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2011

Posts: 104

Likes: 0

From: Las Vegas, NV

Quote:

Originally Posted by Cass007

The mount hole looks too small for the bolt on the steering rack. Does the mount sit on top of the stock VQ mount? It looks like it does.

Don't know. Haven't received install instructions yet.

Quote:

Originally Posted by go7roo7

Melt the rims

Forge into shift *****

Sell to ricers(honda forums)

??????

Profit = Volk Rims

I got Enkei RPF1s sitting in my apartment. Just waiting for more suspension parts so I can install the coilovers and get an alignment so the fresh meat doesn't get ruined. The crap rims will go on CL for stupid cheap.

Quote:

Originally Posted by bbs350z

check your hydraulic lines and make sure the restrictor is minimum 1/8th inch before you install!

Will do! Lots of people have mentioned that so if I forget, it's my own damn fault.

Dec 11, 2011 | 12:59 PM

#38

Royal_T

New Member

iTrader: (9)

Joined: Sep 2004

Posts: 2,840

Likes: 14

From: San Antonio, TX

Good Luck with the build..

Dec 13, 2011 | 07:12 AM

#39

makdaddynuge

Registered User

iTrader: (1)

Joined: Jun 2011

Posts: 52

Likes: 0

From: Louisiana

Quote:

Originally Posted by Cass007

The mount hole looks too small for the bolt on the steering rack. Does the mount sit on top of the stock VQ mount? It looks like it does.

Talked to Todd with Fueled Racing yesterday. The mounts are not used in conjunction with the stock vq mounts. Also shifter placement is centered with gto transmission. F-body transmission must use gto shifter and lever (part #92147292).