2008 M/T transmission on a 2003 Z ?
02-06-2013, 11:49 AM
New Member
Thread Starter
Join Date: Dec 2007
Location: Lebanon
Posts: 352
Likes: 0
2008 M/T transmission on a 2003 Z ?
Hey guys,
is it possible to replace the 2003 Transmission on the Z with a 2008 one ?
anyone done this before ??
thanks !
02-06-2013, 11:54 AM
New Member
Join Date: May 2011
Location: Burlington, NC
Posts: 8,069
Likes: 0
Nope nobody has ever done it
02-06-2013, 12:37 PM
Exhaust Whore
Join Date: Sep 2006
Location: NC
Posts: 10,097
Should be a CD009 trans. Your fine. How many miles on it maybe buy the kit from zspeed to replace just in case
02-06-2013, 01:00 PM
New Member
Thread Starter
Join Date: Dec 2007
Location: Lebanon
Posts: 352
Likes: 0
its off a 2008 Nismo 350Z
02-06-2013, 01:01 PM
New Member
Thread Starter
Join Date: Dec 2007
Location: Lebanon
Posts: 352
Likes: 0
there's no stickers on the tranny
02-06-2013, 01:07 PM
Vendor - Former Vendor
Join Date: Nov 2012
Location: Dirty South
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
no it will not work. you need one from a 03-05, hr motor cars/trans is different
02-06-2013, 01:20 PM
New Member
Thread Starter
Join Date: Dec 2007
Location: Lebanon
Posts: 352
Likes: 0
^ aha ok thanks for the help !
02-06-2013, 01:21 PM
New Member
Thread Starter
Join Date: Dec 2007
Location: Lebanon
Posts: 352
Likes: 0
whats the difference btw ??
02-06-2013, 01:40 PM
Vendor - Former Vendor
Join Date: Nov 2012
Location: Dirty South
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
no problem!
the hr block is different then the de, so the hr trans bell housing of course is designed to work with the hr
02-06-2013, 02:19 PM
New Member
Thread Starter
Join Date: Dec 2007
Location: Lebanon
Posts: 352
Likes: 0
oh i see, what if i replace the HR bellhousing with a DE ?
is it doable ?
02-06-2013, 02:23 PM
Vendor - Former Vendor
Join Date: Nov 2012
Location: Dirty South
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
02-06-2013, 02:25 PM
hatersgonnahate
Join Date: Apr 2005
Location: Greenville, SC
Posts: 15,099
2007 and up went to a CSC which SUCKS! Read up on CSC failure and dead clutch pedals.
Just get the right transmission and stop trying to save a buck that is going to cost you in the long run.
02-06-2013, 08:54 PM
New Member
Join Date: Jun 2011
Location: Fort Bragg
Posts: 238
Isn't there a whole thread on how 06 cd009 transmissions work and hot to do it... 07+ don't work. Just search cd009 and see what u get...
02-07-2013, 12:28 AM
Registered User
Join Date: Nov 2010
Location: Houston
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
I believe if you change the bellhousing you'll be good. I remember a thread where some guy swapped the bellhousing on the 370z tranny and made it fit his 350. I'll search for it when i am not lazy.
02-07-2013, 07:55 AM
hatersgonnahate
Join Date: Apr 2005
Location: Greenville, SC
Posts: 15,099
I swear there is a guy that did this swap (one way or the other) and had to do some extensive machining work to make it happen. Not just bolts and fluids.
02-07-2013, 11:08 AM
New Member
Thread Starter
Join Date: Dec 2007
Location: Lebanon
Posts: 352
Likes: 0
Quote:
Originally Posted by
Itzcashew
I believe if you change the bellhousing you'll be good. I remember a thread where some guy swapped the bellhousing on the 370z tranny and made it fit his 350. I'll search for it when i am not lazy.
i see, did u manage to find that thread ? coz i didnt :P
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
07ZEKE
Brakes & Suspension
2
08-23-2021 09:15 PM
burglapfd
Maintenance & Repair
9
12-06-2020 01:04 PM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
Stevo Z
SoCal Marketplace
4
10-03-2015 09:14 PM