350z Transgo instructions
#2
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Wait, i thought you bought one here https://my350z.com/forum/10001068-post6.html and was getting it installed at a local shop. Didn't it come with instructions?
Read the DIY here https://my350z.com/forum/engine-driv...y-upgrade.html - you'd see in the first post that they can be downloaded from the GTM site.
Read the DIY here https://my350z.com/forum/engine-driv...y-upgrade.html - you'd see in the first post that they can be downloaded from the GTM site.
Last edited by DavesZ#3; 03-23-2013 at 10:45 AM.
#4
Registered User
Thread Starter
![Default](https://my350z.com/forum/images/icons/icon1.gif)
so i did the transgo mod and when i put my valve body back in the car the car is really hard to put in gear... i have not started the car or put new oil in it because i want to make sure it is correct first... so i pulled everything back out and tried to adjust the arm on the valve body a bit by loosening and retightening the bolts and broke 2 bolts that hold the arm on to the valve body assembly. so now... i will need 2 more bolts and still cannot figure out why it is hard to put in gear without the valve body in it is easy and smooth and the valve dboy arm moves easy as well but when i put them together its like something is causing it to bind up.
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM
seagrasser
Zs & Gs For Sale
6
10-11-2015 03:27 PM