Its Back, Its Black And Its Bad ***!!!!
Originally posted by Loren04G35
This is very incorrect! They have been using coolent crossovers on intakes for over 50 years and it is only for 1 reason: cold climates. The coolent crossover is to keep the throttle plate from freezing shut when a car is started in a cold enviroment. These are only climates that remain below freezing for extended periods of time. Beyond that, all it does is heat up the intake manifold and the intake air charge. This is simply a waste that has no benefit for those of us in warner climates. This same crossover exists on Mustang and LS1/LS6 intake manifolds. As one of the cheapest mods, installing a coolent bypass to remove this from the intake and it adds 5 hp to those cars.
This is very incorrect! They have been using coolent crossovers on intakes for over 50 years and it is only for 1 reason: cold climates. The coolent crossover is to keep the throttle plate from freezing shut when a car is started in a cold enviroment. These are only climates that remain below freezing for extended periods of time. Beyond that, all it does is heat up the intake manifold and the intake air charge. This is simply a waste that has no benefit for those of us in warner climates. This same crossover exists on Mustang and LS1/LS6 intake manifolds. As one of the cheapest mods, installing a coolent bypass to remove this from the intake and it adds 5 hp to those cars.
Enough already, between this thread and HFM' crawford thread I'm going nuts.
I'll have to settle this, On or around March 10th, I have a Brand New 04 SB Base being delivered at Preformance Nissan. Jeff will varify. I'll Dyno after 1200 mi, (4-5 days for me) then it's mod time. I'll start with the Jwt popcharger,then Dyno a Crawford and Kinetix (If we can get them to Test ) them Ur pulleys then RT cats all with stock exhaust ( exhaust I'll do when we put the Twin Turbos in Looking for 3" turbo exhaust).
The dynos will be done at Powertrain Dynamics. I'll post exact times and dates for anyone interested....
I'll have to settle this, On or around March 10th, I have a Brand New 04 SB Base being delivered at Preformance Nissan. Jeff will varify. I'll Dyno after 1200 mi, (4-5 days for me) then it's mod time. I'll start with the Jwt popcharger,then Dyno a Crawford and Kinetix (If we can get them to Test ) them Ur pulleys then RT cats all with stock exhaust ( exhaust I'll do when we put the Twin Turbos in Looking for 3" turbo exhaust).
The dynos will be done at Powertrain Dynamics. I'll post exact times and dates for anyone interested....
That's a tall order. I wouldn't bother if I were you. Why waste your time for half the people on this board to think you fixed the results. If you need to do it for your own edification, more power to ya, but you're gonna get the same backlash.
Dan
Dan
Originally posted by Mr Twisted
Enough already, between this thread and HFM' crawford thread I'm going nuts.
I'll have to settle this, On or around March 10th, I have a Brand New 04 SB Base being delivered at Preformance Nissan. Jeff will varify. I'll Dyno after 1200 mi, (4-5 days for me) then it's mod time. I'll start with the Jwt popcharger,then Dyno a Crawford and Kinetix (If we can get them to Test ) them Ur pulleys then RT cats all with stock exhaust ( exhaust I'll do when we put the Twin Turbos in Looking for 3" turbo exhaust).
The dynos will be done at Powertrain Dynamics. I'll post exact times and dates for anyone interested....
Enough already, between this thread and HFM' crawford thread I'm going nuts.
I'll have to settle this, On or around March 10th, I have a Brand New 04 SB Base being delivered at Preformance Nissan. Jeff will varify. I'll Dyno after 1200 mi, (4-5 days for me) then it's mod time. I'll start with the Jwt popcharger,then Dyno a Crawford and Kinetix (If we can get them to Test ) them Ur pulleys then RT cats all with stock exhaust ( exhaust I'll do when we put the Twin Turbos in Looking for 3" turbo exhaust).
The dynos will be done at Powertrain Dynamics. I'll post exact times and dates for anyone interested....
Thread Starter
Registered User
iTrader: (5)
Joined: Aug 2002
Posts: 1,721
Likes: 0
From: Copacabana, Rio de Janeiro BR
I've got anwsers and I KNOW you guys want to see them.
I did runs AND I got gains!
It cost ME extra, so, because some people on this forum said they would be willing to paypal me some dough to help cover the costs, I am willing to make an offer to those who are interested.
here is the deal.
I went in and asked for three to four runs and asked him if he would hook me up (because of all the runs I have already paid for!). He said he would do double for the price of one and a half, so i said ok.
Total cost for 4 runs = $135.00
Then, the actual dyno guy said he would throw me a couple more if................ so I greased him an extra twenty to get a total of SIX RUNS!
So this is what he did..........
three runs back to back to back (produced good gains), he then dropped the car back to idle and left it running for about two - three minutes. (dyno runs all in 5th gear)
then he did three more runs, back to back to back (in four gear) oops, his mistake, gotta do more!
, THEN
Because of his mistake
, he had to do three more runs (in fifth) which once again were all back to back to back. (great results here!)
All totalled I got NINE RUNS out of 'em for $155.00!
Now that is $65.00 MORE than I was planning on spending so I want to make this REAL OFFER to people out there that want to help me!
PM me your willingness to help and I will PM you my paypal address. The first six to paypal me $11.00 (and I will only take six paypals total) and you will go DIRECTLY TO THE TOP OF LSDUNIQUE'S LIST of who gets the plenum's first!
THATS RIGHT, YOU WANT IT, STEP UP TO THE PUMP AND SHOW ME THE MONEY!
I have not spoken to lsdunique about this but I am sure he will not mind. If he does, then you will all get your money back because I do not there to be any problems with this offer.
BUT - BASED ON LSDUNIQUE'S personality, I am sure he will honor this request from me and YOU WILL GET THE FIRST PRODUCTION UNITS MADE. GUARANTEED!
Now on to the dynos.
THIS UNIT PRODUCES VERY GOOD NUMBERS, EVEN FOR A MODDED OUT CAR LIKE MINE. AT THE MOMENT ALL I AM GOING TO SAY IS THAT BECAUSE I AM AT WORK AND CANNOT DO ALL THAT IS NECCESARY TO PRINT THE DYNO'S RIGHT NOW.
you will all see them tonight. guaranteed. you will all be impressed, (unless you are a disbeliever!) and with SIX RUNS in fifth gear even the most stuborn of people will have to see I am not BS'ing. Still want to doubt me, call:
THE DYNO SHOP in Santee, CA......
SO, WHO IS GOING TO PUT THERE MONEY WHERE THE MOUTH IS?.........
I did runs AND I got gains!
It cost ME extra, so, because some people on this forum said they would be willing to paypal me some dough to help cover the costs, I am willing to make an offer to those who are interested.
here is the deal.
I went in and asked for three to four runs and asked him if he would hook me up (because of all the runs I have already paid for!). He said he would do double for the price of one and a half, so i said ok.
Total cost for 4 runs = $135.00
Then, the actual dyno guy said he would throw me a couple more if................ so I greased him an extra twenty to get a total of SIX RUNS!
So this is what he did..........
three runs back to back to back (produced good gains), he then dropped the car back to idle and left it running for about two - three minutes. (dyno runs all in 5th gear)
then he did three more runs, back to back to back (in four gear) oops, his mistake, gotta do more!
, THENBecause of his mistake
, he had to do three more runs (in fifth) which once again were all back to back to back. (great results here!)All totalled I got NINE RUNS out of 'em for $155.00!
Now that is $65.00 MORE than I was planning on spending so I want to make this REAL OFFER to people out there that want to help me!
PM me your willingness to help and I will PM you my paypal address. The first six to paypal me $11.00 (and I will only take six paypals total) and you will go DIRECTLY TO THE TOP OF LSDUNIQUE'S LIST of who gets the plenum's first!
THATS RIGHT, YOU WANT IT, STEP UP TO THE PUMP AND SHOW ME THE MONEY!
I have not spoken to lsdunique about this but I am sure he will not mind. If he does, then you will all get your money back because I do not there to be any problems with this offer.
BUT - BASED ON LSDUNIQUE'S personality, I am sure he will honor this request from me and YOU WILL GET THE FIRST PRODUCTION UNITS MADE. GUARANTEED!
Now on to the dynos.
THIS UNIT PRODUCES VERY GOOD NUMBERS, EVEN FOR A MODDED OUT CAR LIKE MINE. AT THE MOMENT ALL I AM GOING TO SAY IS THAT BECAUSE I AM AT WORK AND CANNOT DO ALL THAT IS NECCESARY TO PRINT THE DYNO'S RIGHT NOW.
you will all see them tonight. guaranteed. you will all be impressed, (unless you are a disbeliever!) and with SIX RUNS in fifth gear even the most stuborn of people will have to see I am not BS'ing. Still want to doubt me, call:
THE DYNO SHOP in Santee, CA......
SO, WHO IS GOING TO PUT THERE MONEY WHERE THE MOUTH IS?.........
Very nice, happy to hear positive results.
A sidenote, however, is you keep moving people to "the top of the list", well either they aren't going to the top, or other people are being bumped down from the top. I was told I would be one of the first 5 with the plenum because I lent LSD the JIC strut bar. Now if you move six people ahead of me, I feel that is unfair to me. Just my thoughts...
Can't wait to see the dyno plots, thanks for doing it and taking so much of your time!
A sidenote, however, is you keep moving people to "the top of the list", well either they aren't going to the top, or other people are being bumped down from the top. I was told I would be one of the first 5 with the plenum because I lent LSD the JIC strut bar. Now if you move six people ahead of me, I feel that is unfair to me. Just my thoughts...Can't wait to see the dyno plots, thanks for doing it and taking so much of your time!
So what's your email address for paypal. I, in all likelihood, will not get this plenum, but who knows. I do want to help you out a bit because I know what it's like to be a pioneer and spend a lot of your own money on dynos for the benefit of the community.
Gurgen
Gurgen
Last edited by GurgenPB; Feb 9, 2004 at 10:59 AM.
Originally posted by wren57
^Was quoting all_bark's post really neccesary? I hate overzealous usage of the quote function... please edit it for less spamming in the thread. As a corrolary of your cooperation, I shall remove this post. Thank you.
^Was quoting all_bark's post really neccesary? I hate overzealous usage of the quote function... please edit it for less spamming in the thread. As a corrolary of your cooperation, I shall remove this post. Thank you.
Slow day for you i guess. You've got nothing better to talk about? I did the edit before I saw your post. But relax, it's not the end of the world. It is only a forum post.
Gurgen
Thread Starter
Registered User
iTrader: (5)
Joined: Aug 2002
Posts: 1,721
Likes: 0
From: Copacabana, Rio de Janeiro BR
If I am correct, he is doing an initial batch of between 10 and 20 molds for the first set of shipments. you will not be bumped wren, espessially because you helped HIM.
I am saying, if you want to be in the first batch, help me! If you do not want to help, you are under NO FORCE to do so, I just spent quite a bit more of my time and money than I wanted to. if you do not have it or do not want to help, don't!
and one last thing, - i am not posting my paypal address here, if you want it, PM me and I will PM it back to you. thats all, see you tonight! this way i can make sure not to get more than 6 paypals from different people. (I am not trying to make money here people)
I am saying, if you want to be in the first batch, help me! If you do not want to help, you are under NO FORCE to do so, I just spent quite a bit more of my time and money than I wanted to. if you do not have it or do not want to help, don't!
and one last thing, - i am not posting my paypal address here, if you want it, PM me and I will PM it back to you. thats all, see you tonight! this way i can make sure not to get more than 6 paypals from different people. (I am not trying to make money here people)
Good to know.
Thanks again all_bark for all your effort in being an independent testbed for such an exciting and controversional new product. Also thanks to LSD for keeping in touch with the public along every step of the way in R&D. Two of the few class acts on this forum.
Thanks again all_bark for all your effort in being an independent testbed for such an exciting and controversional new product. Also thanks to LSD for keeping in touch with the public along every step of the way in R&D. Two of the few class acts on this forum.
Originally posted by all_bark
If I am correct, he is doing an initial batch of between 10 and 20 molds for the first set of shipments. you will not be bumped wren, espessially because you helped HIM.
I am saying, if you want to be in the first batch, help me! If you do not want to help, you are under NO FORCE to do so, I just spent quite a bit more of my time and money than I wanted to. if you do not have it or do not want to help, don't!
and one last thing, - i am not posting my paypal address here, if you want it, PM me and I will PM it back to you. thats all, see you tonight! this way i can make sure not to get more than 6 paypals from different people. (I am not trying to make money here people)
If I am correct, he is doing an initial batch of between 10 and 20 molds for the first set of shipments. you will not be bumped wren, espessially because you helped HIM.
I am saying, if you want to be in the first batch, help me! If you do not want to help, you are under NO FORCE to do so, I just spent quite a bit more of my time and money than I wanted to. if you do not have it or do not want to help, don't!
and one last thing, - i am not posting my paypal address here, if you want it, PM me and I will PM it back to you. thats all, see you tonight! this way i can make sure not to get more than 6 paypals from different people. (I am not trying to make money here people)
Originally posted by Mr Twisted
I suppose your right, It's like asking who is the greatest football and baseball team is of all time and then betting which team would win in a hockey stand-off.
I suppose your right, It's like asking who is the greatest football and baseball team is of all time and then betting which team would win in a hockey stand-off.
Dan
Originally posted by 350zdanny
The 1989 Forty Niners would play the 1927 Yankees, and even with that fat **** Ruth in the goal I have to believe that Montana would lead the Niners to victory.
Dan
The 1989 Forty Niners would play the 1927 Yankees, and even with that fat **** Ruth in the goal I have to believe that Montana would lead the Niners to victory.
Dan
Thread Starter
Registered User
iTrader: (5)
Joined: Aug 2002
Posts: 1,721
Likes: 0
From: Copacabana, Rio de Janeiro BR
OK OK...
I got LOTS of paypal requests...
thanks to everyone.
I have only opened and replied to the first six. Of that two have already sent me the $11.00!
If the other four do not pay by tonight I will then reply to the others on the list (there is probably six or eight more!) until I get six who send the money.
I will check again when I get home from work and get the dyno charts up!
JUST A SMALL HINT........
the gains are in the double digits!!!!!!!!!!!!!!!!!!!!!!!!!
I got LOTS of paypal requests...
thanks to everyone.
I have only opened and replied to the first six. Of that two have already sent me the $11.00!
If the other four do not pay by tonight I will then reply to the others on the list (there is probably six or eight more!) until I get six who send the money.
I will check again when I get home from work and get the dyno charts up!
JUST A SMALL HINT........
the gains are in the double digits!!!!!!!!!!!!!!!!!!!!!!!!!
Originally posted by all_bark
OK OK...
I got LOTS of paypal requests...
thanks to everyone.
I have only opened and replied to the first six. Of that two have already sent me the $11.00!
If the other four do not pay by tonight I will then reply to the others on the list (there is probably six or eight more!) until I get six who send the money.
I will check again when I get home from work and get the dyno charts up!
JUST A SMALL HINT........
the gains are in the double digits!!!!!!!!!!!!!!!!!!!!!!!!!
OK OK...
I got LOTS of paypal requests...
thanks to everyone.
I have only opened and replied to the first six. Of that two have already sent me the $11.00!
If the other four do not pay by tonight I will then reply to the others on the list (there is probably six or eight more!) until I get six who send the money.
I will check again when I get home from work and get the dyno charts up!
JUST A SMALL HINT........
the gains are in the double digits!!!!!!!!!!!!!!!!!!!!!!!!!
Bro, stop making it sound like your selling lottery tickets or Halle Berry or something. Its dyno charts, just post them. You spent $30K+ on your car and obviously don't mind spending money on the mods, just post the damn things since that is what this forum is all about anyway, sharing info amoung fellow G drivers. If someone sent me the plenum for next to nothing, I would dyno it any way you wanted.
No flames please, it was just getting annoying.
Originally posted by belerin
Bro, stop making it sound like your selling lottery tickets or Halle Berry or something. Its dyno charts, just post them. You spent $30K+ on your car and obviously don't mind spending money on the mods, just post the damn things since that is what this forum is all about anyway, sharing info amoung fellow G drivers. If someone sent me the plenum for next to nothing, I would dyno it any way you wanted.
No flames please, it was just getting annoying.
Bro, stop making it sound like your selling lottery tickets or Halle Berry or something. Its dyno charts, just post them. You spent $30K+ on your car and obviously don't mind spending money on the mods, just post the damn things since that is what this forum is all about anyway, sharing info amoung fellow G drivers. If someone sent me the plenum for next to nothing, I would dyno it any way you wanted.
No flames please, it was just getting annoying.



